Assetto Corsa PC Mods General DiscussionPC

[Alguecool]

Thanks, but they are fictitious skins

... What exactly did you expected as "real liveries" from 1967, for a 1969'th car ?

 

[24H]

no blurry previews here

 

[CrisT86]

good evening. question for ext_config.ini experts
I want to add lighting masks to the glowing instrument dials.
so.
[CustomEmissive]
Meshes = MISC_1.014
Resolution = 2048, 1024
AreasSubtractive = 1
@ = CustomEmissive_AreaMask, Channel = 1, Start = "1550, 0", Size = "498, 487", CornerRadius = "1.0", Exponent = "0.1"
@ = CustomEmissive_AreaMask, Channel = 2, Start = "1784, 752", Size = "264, 272", CornerRadius = "1.0", Exponent = "0.1"
@ = CustomEmissive_AreaMask, Channel = 3, Start = "1517, 752", Size = "268, 272", CornerRadius = "1.0", Exponent = "0.1"
@ = CustomEmissive_AreaMask, Channel = 4, Start = "1520, 492", Size = "260, 261", CornerRadius = "1.0", Exponent = "0.1"
@ = CustomEmissive_AreaMask, Channel = 5, Start = "1779, 492", Size = "269, 261", CornerRadius = "1.0", Exponent = "0.1"
The first 4 masks work, the last (fifth) one always doesn't work. Even if you swap the lines up and down, it's the last one that doesn't work.
The question is, is there a limit on the number of valid CustomEmissive_AreaMask (4 pcs) or did I write something wrong, which is why the last (5th) line doesn't work?

As far as i know you can only have 4 channels.

 

[Alguecool]

As far as i know you can only have 4 channels.

Technically no, but IF the ext_config apply the emissive on the shader using a texture with 4 channels (which is the basis format), in that case yes I guess it could not apply more.

@alexlockout I guess the idea is to "mask" a full textured mesh so only a small part appears brighten, right ? Geniune question : why the 5 differents masks ?

 

[Fanapryde]

In my case it was here

Sorry, which part of my post was it that you didn't understand ?

 

[Masscot]

Anyone else notice that CSP flags break unless Track Adjustments is active?
So... have teleporting crowds but working jumbotrons and flags, OR have normal crowds but broken flags and jumbotrons.
Wonderful.
Best CSP ever.

 

[Penny]

Hi all.

Is it possible to remove the barriers at the start of pit lane on Nemuno-Žiedas. Smaller cars get through ok but larger cars get stuck until they teleport to pit.

I've also noticed that the cars slow down and zig-zag as they cross the start - finish line area. I assume this is an AI line issue?

Other than that, great track with excellent road surface texture ffb.

v0.96 of the track - https://assettocorsamods.net/resources/nemuno-Žiedas.119/updates

 

[OooAhh Cantona]

Released : Audi A4 Quattro Supertouringcar
Author:F302
3D Model Car:RRRE,KW Studios
Texture Update : F302 (rework)
Skins: RRRE,KW Studios,StoffleWaffle
Driver Animation :Masscot
3d work: F302
hope u enjoy the Car
ps : send feedback ,bugs ,missing things
tested on 0.2.6-preview1
PP filer _PURELIFEEVO
have fun!
To install, move folders to "...\SteamApps\common\assettocorsa" or simply
drag'n'drop archive to Content Manager

283.28 MB file on MEGA

mega.nz

View attachment 1423689

Finally tested this car. Are the tyres correct? CM shows an "F" match. Should the ideal data show "A" match?

I can go into tyres.ini and change the radius from 0.325 to 0.305 to get the 255/20/R18 match. But then there is a "setup invalid" error after loading the car to drive, and the game does not allow me to drive the car.

 

[ninezeroniner]

Thanks, but they are fictitious skins

My fault, my fault, I knew these are the only ones. I deserve poo.

 

[Masscot]

Additional Layouts For Algarve 2023 (LuisB) 2.3​

https://www.gtplanet.net/forum/downloads/additional-layouts-for-algarve-2023-luisb.7047/download

[/URL]

original track required:

Algarve Portimao 2023​

unzip the archive into a folder:
Steam\steamapps\common\assettocorsa\content\tracks

Thanks for these @LaChub, your additional layouts are always most welcome.
I've only just noticed that you also keep the original preview background image backed up in the folder too, so we can revert if we want to - thanks for that.

 

[YOMISMODEMI]

Finally tested this car. Are the tyres correct? CM shows an "F" match. Should the ideal data show "A" match?

View attachment 1425446

I can go into tyres.ini and change the radius from 0.325 to 0.305 to get the 255/20/R18 match. But then there is a "setup invalid" error after loading the car to drive, and the game does not allow me to drive the car.

you better don´t take a look on where the fuel tank is located...

 

[mr2it3881]

Yeah something like 1 out of 12 previews gets glitched...
View attachment 1425290
View attachment 1425291


But, at least for me, small inconsistencies are everywhere.
Plus, CSP-activated stuff grows day after day.
View attachment 1425292
Oh, and CM forced autoupdates are scary as hell too.

What car and livery is this?

 

[Racer63]

Needing help gathering an accurate F1 1975 grid. I know about Bazza's cars but it has the Tyrrell P34 and that one was not used till 76. I need the Tyrrell 007 which competed in 75.
AFAIK there's one in one of Simdream's packs 🤮 and another one I've found but this 007 is causing all type of errors with the tyres and has no lods.
Do you know if is there a decent Tyrrell 007 somewhere?

Edit: I found a Tyrrell skin for the Ferrari 312T. I think I'm going that way by now

Tyrrell 007 - Jody Scheckter - Skin for Ferrari 312t

Hi! After finishing Hesket 308 skin i thought that next one must be Tyrrell, so i spend many hours to find good photos and luckily i found them. :) Now it's time to release Tyrrell 007 skin. Package contains Tyrrell 007 livery, Jody Scheckter's...

www.overtake.gg

 

[MasterFocus]

Finally tested this car. Are the tyres correct? CM shows an "F" match. Should the ideal data show "A" match?

View attachment 1425446

I can go into tyres.ini and change the radius from 0.325 to 0.305 to get the 255/20/R18 match. But then there is a "setup invalid" error after loading the car to drive, and the game does not allow me to drive the car.

Place this inside data folder and remove the .txt at the end see attachment at the end of this message

you better don´t take a look on where the fuel tank is located...

That would be OEM location as a race car more than likely have a fuel cell inside the trunk

 

[OooAhh Cantona]

Place this inside data folder and remove the .txt at the end see attachment at the end of this message


That would be OEM location as a race car more than likely have a fuel cell inside the trunk
View attachment 1425467

Thanks! How did you update these numbers?

 

[MasterFocus]

Thanks! How did you update these numbers?
View attachment 1425482

When you add tires to a model, CM generate an "original" ([__CM_FRONT_ORIGINAL], [__CM_REAR_ORIGINAL]) and the size is often not exactly the same but I dont know why it change tho.
But copying and pasting dimension from the one you created to the CM ORIGINAL will get you the "right" fitment