Drive Hub Racing Wheel Converter

  • Thread starter VBR
  • 3,676 comments
  • 954,678 views
Podger
I put .46 on the server, its deffo .46 this time, sorry about the confusion last time. I also fixed up the exit game, pause game, enter pit lane issue. It will now cancel any force so it wont full lock and also added a weak spring that with slowly center the wheel too, either would have done but both is better... again any feedback is much appreciated.
Click to expand...
Still the same. Steering input is not recognized in GT Sport with T500.
 
i just try Dirt Rally 2.0 on PS4 and i have some trouble with the FFB of my TS-XW.
he is very low and i don't have any rumble in my wheel.
my wheel is well detect as a T300RS and the fw of drive hub is the last one 2.0.3 beta 46
firmware ts-xw : 4.00 the last one
Podger are you inform of that trouble?
before everything was ok with wrc 7 / dirt rally / dirt 4
Thanks
 
Last edited:
Dirt Rally 2.0 has missing FFB compared to DR. That is for all wheel users. I hope they fix that. Nothing Drivehub can do here.

G25 works with TH8a and my homemade hand brake in DR2.

Here are my settings:

I short calibrated it to 540 degrees, as that is what most cars seems to be having in DR2.

Linearity 0
Saturation between 60 and 70 . 70 for now as it dampens my input.
Soft lock ON . to make use of my calibrated 540 degrees.

feels pretty spot on :)

edit linearity = 0

FFB is the same as everyone else. Not up to DR1 standards
 
Last edited:
@Podger, there's also another bug which I experience from time to time. When I go to PC2 the wheel thinks its full rotation is 270 degrees. It calibrates normally on bootup to full rotation in both sides. If I do IG calibration (through settings in PC2), 100 is reached on around 270 degrees and moving it further than that doesn't do anything. To fix this, I have to leave the game and go to Dirt Rally. There I turn the wheel to register the full rotation. After going back to PC2, then the wheel works properly.

It only happens from time to time, so I can't really tell what exactly triggers this. Haven't been really playing PC2 a lot lately.
 
Last edited:
Hi, I am using a drivehub for playing gtsport with T-gt and Csl elite pedals. Everything works spot on but every now and then the throttle gets stuck on 100% and the wheel is unresponsive... I replug the usb in my drivehub and itsi back to normal. Anyway i can prevent this?

Thank you
 
MikiMadM3
Hi, I am using a drivehub for playing gtsport with T-gt and Csl elite pedals. Everything works spot on but every now and then the throttle gets stuck on 100% and the wheel is unresponsive... I replug the usb in my drivehub and itsi back to normal. Anyway i can prevent this?

Thank you
Click to expand...
Check if you are using the latest beta firmware.
 
Racetee
@Podger, there's also another bug which I experience from time to time. When I go to PC2 the wheel thinks its full rotation is 270 degrees. It calibrates normally on bootup to full rotation in both sides. If I do IG calibration (through settings in PC2), 100 is reached on around 270 degrees and moving it further than that doesn't do anything. To fix this, I have to leave the game and go to Dirt Rally. There I turn the wheel to register the full rotation. After going back to PC2, then the wheel works properly.

It only happens from time to time, so I can't really tell what exactly triggers this. Haven't been really playing PC2 a lot lately.
Click to expand...
Just tried again. Fresh boot of PS4. Went to PC2 and full rotation of the wheel was detected as 270 degrees. Went to Dirt Rally and then back to PC2 and it was properly 1080 again.
 
Last edited:
gt_fan
Another possibility - is your ps4 controller on (the one plugged into the drive hub)?. It needs to be off for the drivehub to work properly.
Click to expand...
Actually there is no controller plugged in since the Tgt has to fit inside the controller port on the drive hub to work. But indeed my controller was on, is the only way one can use headphones and mic, or is it?
 
@Podger

I just replaced my old wheel with a TS-PC 488 Challenge base/wheel and am having some problems in GTS on PS4 as follows:

-Running latest DH firmware Beta 46
-Runing latest Thrustmaster firmware for base and wheel 9.00 and 7.00 respectively
-Hooked everything up as normal
-Game starts and I have force feedback but no steering.

Any other current reports of TS-PC issues?
 
MarcoM
Dirt Rally 2.0 has missing FFB compared to DR. That is for all wheel users. I hope they fix that. Nothing Drivehub can do here.

G25 works with TH8a and my homemade hand brake in DR2.

Here are my settings:

I short calibrated it to 540 degrees, as that is what most cars seems to be having in DR2.

Linearity 0
Saturation between 60 and 70 . 70 for now as it dampens my input.
Soft lock ON . to make use of my calibrated 540 degrees.

feels pretty spot on :)

edit linearity = 0

FFB is the same as everyone else. Not up to DR1 standards
Click to expand...

i try to connect my old t500rs directly on ps4, i have some rumble in the wheel.
when i connect my t500rs on the drive hub, i don't have any rumble.
so i think it's not only the game ;)
 
Oh I do get Some but not as in dr 1. As many wheel userd reported


I am used to it now and the feeling of weigth is pretty nice.
 
Is it just me or the motivation for developing this product is vanishing? It is definitely a great idea, but it would need more attention to keep up with the compatibility. There was also supposed to be a "play" mode, but we never heard about it (it was "coming soon" in 2017). I just hope they open source the firmware, if it gets finally abandoned, so we are not left with only an expensive piece of plastic.
 
Racetee
Is it just me or the motivation for developing this product is vanishing? It is definitely a great idea, but it would need more attention to keep up with the compatibility. There was also supposed to be a "play" mode, but we never heard about it (it was "coming soon" in 2017). I just hope they open source the firmware, if it gets finally abandoned, so we are not left with only an expensive piece of plastic.
Click to expand...

Do you miss play mode? Can't you do something that you think you should be able to?

My experience with Podger here is that he's very receptive to questions and finding solutions.
 
MarcoM
Do you miss play mode? Can't you do something that you think you should be able to?
Click to expand...
a) I don't, just stating the arguments.
b) I can't play GT Sport with my T500 using Drivehub and I need to use a trick every time I want to play PC2.
 
Racetee
Is it just me or the motivation for developing this product is vanishing? It is definitely a great idea, but it would need more attention to keep up with the compatibility. There was also supposed to be a "play" mode, but we never heard about it (it was "coming soon" in 2017). I just hope they open source the firmware, if it gets finally abandoned, so we are not left with only an expensive piece of plastic.
Click to expand...


You first posted about your problem on Jan 18th in this thread, not even two months ago, & @Podger has been discussing it with you ever since. Sounds like the motivation for him coming on here & engaging with customers while trying to find solutions is still there. If the problem can be solved it more than likely will be, sooner or later. I know that it can be frustrating having something not working for you, but, how about showing some patience instead of accusing people of lacking motivation when the facts of the matter show otherwise?
 
Hi Guys,
I'm not on here all the time, I do try to keep in touch however... I'm tracking 2 issue right now one with t500 and one with ts-pc... @Racetee please email support a wheelman@collectiveminds.ca, its a better way to track and work on you issues.... we are already dealing with @Tracy Brown on email..
we are at a disadvantage insofar as I don't have a t500 or a ts-pc, makes it super hard to track down issues.... If we did have them then you would probably never see the issues to start with as we would catch them in testing, but we rely on you guys to feedback...
 
Today, after 2 weeks of Dirt Rally 2, I took some cars to the track in project cars 2 on the ps4 with my G25, to find out that the rev lights on the drive hub don't work anymore. I am pretty sure that they did work before. In DR2 they do work.

@Podger , what could be the cause of this? The G25 does work correctly in PC2. :confused:
 
FastForwardNL
Has someone tested the Heusinkveld Sprint pedals with the Drive Hub? Are they compatible?
Click to expand...
we added 2 sets already, we did this with data gathered by the users who requested them added. the Vendor was unwilling to provide any data... If you already have the pedals you could grab the data, I can confirm if they are already there.
 
MarcoM
Today, after 2 weeks of Dirt Rally 2, I took some cars to the track in project cars 2 on the ps4 with my G25, to find out that the rev lights on the drive hub don't work anymore. I am pretty sure that they did work before. In DR2 they do work.

@Podger , what could be the cause of this? The G25 does work correctly in PC2. :confused:
Click to expand...
Hi
I test that scenario and the RPM leds were fine...
 

Similar threads

I
Drive hub + csw 2.0
Replies
2
Views
380
igorp4561
I
J
Drive Hub + CSL DD + CSL Elite WRC wheel - GT7 cursor top right
Replies
4
Views
5K
AldoRainex
AldoRainex
I
Fanalogic to Fanatec mode
Replies
0
Views
361
igorp4561
I
Q
Fanatec Clubsport Porsche 911 GT3 Wheel with Drive Hub unit for PS Elite CSL Inquiry
Replies
1
Views
1K
super_gt
super_gt
L
Fanatec DD Extreme / Clubsport Pedals with Logitech Playseat?
Replies
3
Views
3K
Ian JB
I

Latest Posts

Back