- 1,521
- Seixal
- zefthebestofcour
If the V3 has a connection for the handbreak and the T300 a connection for the Th8rs ... I think it will be possible... only one wheel and one adicional acessory may be connected to the drivehub...
Drive Hub Racing Wheel Converter
- Thread starter VBR
- 3,676 comments
- 953,944 views
You can simply use USB hub, if you need more
- 386
- Ireland
Yes we only support 1 wheel at a time, connecting 2 concurrently would be a total **** show with the steering, but its not true regarding the accessories, you can have up to 8 devices connected, you can add a USB hub to create more ports... just the other night I had a TSS in handbrake mode, a fanatec handbrake in v3 pedals and 2 th8a ( one H and one seq)... You
- 1,521
- Seixal
- zefthebestofcour
- 1,521
- Seixal
- zefthebestofcour
Huh. Does that mean, with drivehub I could use my old G25 Shifter with a Thrustmaster wheel in GT Sport?!?
- 1,521
- Seixal
- zefthebestofcour
.
- 1,521
- Seixal
- zefthebestofcour
In which mode you ve set DH?? 1st you must put in Setup ( update firmware mode) ... and I also think that 1st you have to install the software on the Pc... and even like that it may happen that the DH is only found at 2nd or 3rd try of running the setup program... ( the setup program has to be runned 1st) please follow the instructions on the manual not skipping any pass...
All is working perfect. Did the update in win10 and worked flawless within 90 seconds.
T300 /F1 wheel/ elite csl lc pedals/ ps4. Works as a charm.
Great product , would recommend the DH to anyone
- 1,521
- Seixal
- zefthebestofcour
In win10 piece of cake. Might have done something wrong in Win7 as the DH kept being shown as a printer no matter what I did.
Glad with the purchase. Magnificant product. Thums up !!
- 1,521
- Seixal
- zefthebestofcour
- 946
- Netherlands
- Shottah072
I am contemplating getting a set of CSL LC pedals to go with my T300 wheel.
Will the pedals and wheel feel exactly the same on the PS4 when run trough the drivehub ?
Just read your post. I have the exact same wheel and looking to get the CSLE LC. Did you try the wheel without DH before ? Does it feel just the same ?
Will the pedals and wheel feel exactly the same on the PS4 when run trough the drivehub ?
Just read your post. I have the exact same wheel and looking to get the CSLE LC. Did you try the wheel without DH before ? Does it feel just the same ?
- 627
- Lomma
- GTP_M00ndancer
Got it last Friday. Using it on my PS4 with my CSR and CSR Elite pedals. Works like a charm. Tested DriveClub and GT Sport. Updated the firmware first on Windows 10.
- 15
- United States
- DrVegas45
This may have been brought up previously and if so I apologize. I exclusively play GT Sport on my PS4 pro and currently have a T-GT wheel in which I really like. However I wanted to upgrade the T3PA pedals and have just ordered Clubsport V3 with the brake performance kit and also ordered the Collective Minds Drive Hub to connect. Will there be anything else I will need to connect?
I had another concern and wondered if any of you may have already addressed. I have a relatively new Playseat Evolution Alcantara (replaced an order one). The new seat is great however I already have a lot of flex in the "pedal plate" with the T3PA's and concerned it will be really bad with the new V3's. I saw a post of securing with a block of wood but I know there has to be a better solution. Any suggestions would be greatly appreciated.
I had another concern and wondered if any of you may have already addressed. I have a relatively new Playseat Evolution Alcantara (replaced an order one). The new seat is great however I already have a lot of flex in the "pedal plate" with the T3PA's and concerned it will be really bad with the new V3's. I saw a post of securing with a block of wood but I know there has to be a better solution. Any suggestions would be greatly appreciated.
K1LLD0z3R
Premium
- 903
- USA GMT-7
- DudeTuna
I have updated to new Fanatec drivers v324 for the custom F1 wheel rim. Even while using the my BMW or original F1 rim there is a big input lag in F Mode compared to L mode.
Input lag makes it unplayable in F mode.
I’m playing GTS, with a CSW V2, original F1 rim, V3 pedal set. Firmware v324.
Does anybody have a solution for this?
Input lag makes it unplayable in F mode.
I’m playing GTS, with a CSW V2, original F1 rim, V3 pedal set. Firmware v324.
Does anybody have a solution for this?
Last edited:
- 15
- United States
- DrVegas45
Update - I received my V3 pedals (with brake performance kit) as well as the drivehub about a week ago. I downloaded all driver beta updates and first hooked the T-GT up through the "wheel" port on the drivehub and the pedals in the "accessory" port. The wheel and pedals worked but the FFB was really weak and odd feeling. I then tried hooking the T-GT up through the first port (controller) and left the pedals in the accessory port and it then worked great! I couldn't be happier.
I was able to lower the plate on playseat since I could adjust the angle of the V3's and used a 4x4 block to keep the rig from "flexing". So far it is working really well.
I was able to lower the plate on playseat since I could adjust the angle of the V3's and used a 4x4 block to keep the rig from "flexing". So far it is working really well.
- 59
- United States
I've read through most of this thread over time but sorry if this has already been addressed. I believe this will work but can anyone confirm that I can use drivehub to use a Fanatec shifter and e-brake with my G29?
- 3,042
- The Netherlands
- MarcoM1972
- 7,765
- Yorkshire
- ScapeGoat4U
- WhippingBoy
Drive Hub supports the Fanatec Clubsport USB adapter, so you'll be able to use the shifter. Plug the G29 into the Controller port (this puts it into through mode), then plug the shifter into the adapter & then into Drive Hub's Wheel or Accessory port.
I don't think it would be possible to use the e-brake, as in this case Drive Hub will be using the G29 driver, which doesn't support an e-brake. That said, you might get lucky & find that the e-brake corresponds to a random button on the G29 & inadvertently ends up working if said button is set to "Handbrake" in-game. Buy just one Fanatec Clubsport adapter to start with maybe, & have a play around with it to see what happens (don't know if you can plug multiple devices into one Fanatec adapter).
Last edited:
- 386
- Ireland
The support on PS4 for G29 includes shifters, it doesn’t include analog handbrakes.. the DriveHub will see the handbrake but will convert is to a button press at about 10% on the handbrake...
I guess it’s coz there is no Logitech handbrake so the developers don’t include support in the games....
The same applies to t150 also....
As it turns out the Xbox api supports analog handbrake across the board, so while emulating g920 the analog handbrake works in the games that support it... for some reason the TMx is excluded, I want able to figure out why....
Similar threads
