Fanatec Gran Turismo DD Extreme Wheel

[BWX]

Yes the DD Pro wheel works, it’s the DD Extreme wheel that doesn’t work on the other bases like CSL DD or DD Pro

Cool! Yeah I never tried because I thought I heard someone say on the Famatec forum that it wasn't supported. Maybe they were talking about the DD extreme wheel on the Pro base and I just misunderstood that convo.

That's actually great to hear because the Pro wheel is a lot smaller and even though the shape isn't right, it would be what I would use with some open wheelers until I get a smaller F1 style wheel.

As of now I just have DD Extreme Wheel, WRC wheel, DD Pro wheel, and getting McLaren GT3 tomorrow. But I think the Pro wheel is smaller than the GT3.

Looks like I need one more QR2 LOL

 

[Kriptical]

Cool! Yeah I never tried because I thought I heard someone say on the Famatec forum that it wasn't supported. Maybe they were talking about the DD extreme wheel on the Pro base and I just misunderstood that convo.

That's actually great to hear because the Pro wheel is a lot smaller and even though the shape isn't right, it would be what I would use with some open wheelers until I get a smaller F1 style wheel.

As of now I just have DD Extreme Wheel, WRC wheel, DD Pro wheel, and getting McLaren GT3 tomorrow. But I think the Pro wheel is smaller than the GT3.

Looks like I need one more QR2 LOL

I think the dd pro is 285mm, which is the same as the f1v2 yoke, and the mclaren 300mm and ddx are 300mm’s.

 

[super_gt]

I think the dd pro is 285mm

280mm

which is the same as the f1v2

CSL P1 V2 is 300mm.

 

[Kriptical]

280mm

CSL P1 V2 is 300mm.

Someday im going to learn to drink the full mug of coffee before posting 😂

Someday!

Ty.

 

[PirovacBoy]

Any particular reason why you went with the P1V2? When I first got the DD+ I tried my DD Pro wheel on it and it felt really weak. Once you feel that high torque it’s hard to go back to 8Nm

With the free metal QR2 and free shipping I went ahead and got the R300 and CSL hub bundle. I really only want the wheel but the wheel alone is $150 while the wheel bundle with the CSL hub + QR2 metal is $200 so it really is a no-brainer to get the bundle. With the metal QR2 it will work in high torque mode too

Well I got it for very little cash I paid 80€.
And I absolutely dig its ergonomics.
It just feels so much better than the DD Extreme Rim to me.
I don't mind it being limited to 8NM.
My FFB Sweet Spot is between 6 to 10 NM.
I mostly drive Sports Cars and occasionally GT3/4 Cars and 8 NM feels absolutely enough to me.
GT7 and Motorfest are the only games I play.
Overall I'm very pleased with the Rim.
It looks great it feels great to my hands and the FFB Detail is very well communicated.
I had to adjust some settings compared to my McLaren GT3 Rim to get a similar level of detail but now it feels spot on.

 

[BWX]

Well I got it for very little cash I paid 80€.
And I absolutely dig its ergonomics.
It just feels so much better than the DD Extreme Rim to me.
I don't mind it being limited to 8NM.
My FFB Sweet Spot is between 6 to 10 NM.
I mostly drive Sports Cars and occasionally GT3/4 Cars and 8 NM feels absolutely enough to me.
GT7 and Motorfest are the only games I play.
Overall I'm very pleased with the Rim.
It looks great it feels great to my hands and the FFB Detail is very well communicated.
I had to adjust some settings compared to my McLaren GT3 Rim to get a similar level of detail but now it feels spot on.

It looks very similar to the WRC wheel. Looks like the same wheel actually with different gfx and wheel rim covering. I like the WRC wheel a lot, it has a nice solid feel to it when driving, nice big shifters too. Not bad for the money.

--------------


I just got the Mclaren GT3 today. I thought it had a defect right out of the box. I see these crazy shiny spots all over it. After making the vid it looks like they might be placemarkers for stickers.. but are they usually that bright and reflective?

Just wondering if anyone who has the wheel knows if that is normal or if my dots are more reflective?

 

[PirovacBoy]

Congrats on your McLaren Rim.
It's an amazing Rim you will definitely love it.
I got me a second one too a few weeks ago.
My old one is still in use but in case it breaks anytime I can immediately replace it.
That Rim is extremely durable.
For 199€ it's an absolute bang for buck rim.
And don't you worry about them shiny spots, it's absolutely normal.

 

[BWX]

Congrats on your McLaren Rim.
It's an amazing Rim you will definitely love it.
I got me a second one too a few weeks ago.
My old one is still in use but in case it breaks anytime I can immediately replace it.
That Rim is extremely durable.
For 199€ it's an absolute bang for buck rim.
And don't you worry about them shiny spots, it's absolutely normal.

Thanks! Yeah I'm very pleasantly surprised at how much nicer in person it is, almost shocked. It's sweet!
I don't know why in pics and vids it just doesn't look as nice to me. It feels very nice in hand as well.

Thanks for the feedback, I was hoping I didn't get one with a minor defect.
Can't wait to install the QR2 and test it out!

 

[TSXChef]

Confirming those shiny dots are normal. A great wheel for the price. I changed my paddle with SimMakerz aftermarket, it works well, but it's not as good as Fanatec magnetic shifter on F1 V2.5. When I bought mine, buttons rattled a bit, so I added some this pads under the buttons to remove slack. However, I noticed more recent version of V2 wheel buttons do not rattle, so I guess they fixed it for more recent production versions.

It's my go-to wheel. Not to brag, but got mine signed by Lando and Oscar last year, I'm sure it gives me tenth or two because of it

Enjoy your wheel BWX!

 

[BWX]

Confirming those shiny dots are normal. A great wheel for the price. I changed my paddle with SimMakerz aftermarket, it works well, but it's not as good as Fanatec magnetic shifter on F1 V2.5. When I bought mine, buttons rattled a bit, so I added some this pads under the buttons to remove slack. However, I noticed more recent version of V2 wheel buttons do not rattle, so I guess they fixed it for more recent production versions.

It's my go-to wheel. Not to brag, but got mine signed by Lando and Oscar last year, I'm sure it gives me tenth or two because of it

Enjoy your wheel BWX!

View attachment 1414820

Thanks I will enjoy it! I was half expecting to be disappointed for some reason.
But nope.. it seems super nice, especially for the price.

Wow that's really cool you have those signatures, especially on that wheel! Constructor champions again too, in an epic season.
Seems like that would make it worth quite a bit more money but I'm sure you'll never sell it. I wouldn't. I'd put it in a glass box on display and buy another one to use.

 

[Jeje6410]

Thanks I will enjoy it! I was half expecting to be disappointed for some reason.
But nope.. it seems super nice, especially for the price.

Wow that's really cool you have those signatures, especially on that wheel! Constructor champions again too, in an epic season.
Seems like that would make it worth quite a bit more money but I'm sure you'll never sell it. I wouldn't. I'd put it in a glass box on display and buy another one to use.

you will see she is really good. Very pleasant handling. I do not regret this purchase for 1 week and especially for having followed the advice of this community

 

[BWX]

you will see she is really good. Very pleasant handling. I do not regret this purchase for 1 week and especially for having followed the advice of this community

Thanks! Yeah can't wait to install it. Very busy next few day, LOL. Can't wait to try it out!

 

[Vule]

Yeah, the McLaren is by far the best bang for the buck in the current lineup.

I had one until a week ago, sold it to upgrade to the new GT3 Endurance.

Even though it's great out of the box, upgrading the QR and shifters takes it to a whole different level, and also, the mandatory button rattle fix, and it's golden!

(original Fanatec ClubSport shifters on a 3D printed adapter)

 

[TSXChef]

Yeah, the McLaren is by far the best bang for the buck in the current lineup.

I had one until a week ago, sold it to upgrade to the new GT3 Endurance.

Even though it's great out of the box, upgrading the QR and shifters takes it to a whole different level, and also, the mandatory button rattle fix, and it's golden!

View attachment 1414923

(original Fanatec ClubSport shifters on a 3D printed adapter)

Vule, did you 3D print the bracket and made the cables yourself? or purchased it from Etsy? I'm also considering going to Fanatec shifters. My SimMakerz shifter is mis-shifting so if I can't get trigger/button harness from SimMakerz, I'll probably go your route (I had SimMakerz mag shifter for nearly 2yrs, they've been good though).

Also, for your GT3 Endurance wheel, have you tried printing decal label on it? Thanks.

Wow that's really cool you have those signatures, especially on that wheel! Constructor champions again too, in an epic season.
Seems like that would make it worth quite a bit more money but I'm sure you'll never sell it. I wouldn't. I'd put it in a glass box on display and buy another one to use.

Thanks BWX. Yeah, it's pretty cool to have McLaren wheel with driver signatures. It probably be worth something, but it'll stay with me for awhile . I hope to get GT3 Endurance signed as well if I ever get the chance, wheel's empty canvas begs for notable signatures.

 

[BWX]

Yeah, the McLaren is by far the best bang for the buck in the current lineup.

I had one until a week ago, sold it to upgrade to the new GT3 Endurance.

Even though it's great out of the box, upgrading the QR and shifters takes it to a whole different level, and also, the mandatory button rattle fix, and it's golden!

View attachment 1414923

(original Fanatec ClubSport shifters on a 3D printed adapter)

Very cool. My only regret is that I didn't get one sooner!
I'm going to have to copy your setup! I have a metal QR2 to install so that's a good start. 🤘

Edit- and congrats on new wheel! Those things look like a pretty nice step up.
I was going to get one but figured I could upgrade after I get a smaller F1 style wheel.

 

[Vule]

Vule, did you 3D print the bracket and made the cables yourself? or purchased it from Etsy? I'm also considering going to Fanatec shifters. My SimMakerz shifter is mis-shifting so if I can't get trigger/button harness from SimMakerz, I'll probably go your route (I had SimMakerz mag shifter for nearly 2yrs, they've been good though).

Yeah, I have a friend that has a 3D printer and I sent him this file:

Fanatec Magnetic Paddle Adapter for McLaren GT3 Wheel by Mr.Marler | Download free STL model | Printables.com

Adapter for mounting the original Fanatec Magnetic Paddles on a Fanatec McLaren GT3 V2 Steering Wheel. | Download free 3D printable STL models

www.printables.com

It came out great, I only had to drill out the QR mounting holes just a bit more, but it was a piece of cake. Take note - if you're going the metal QR1 route, you'll have to file the inside of the adapter a bit, but it's also a 5 minute job.

Regarding cables - it can be a bit tricky, you can order some adapter I believe, but I did it myself, cut the wires from the magnetic shifters, measured the connectors with a multimeter and found out what cables give the signal when the shifter is pressed, and just connected it to the original McLaren 2-cable connector.

Also, for your GT3 Endurance wheel, have you tried printing decal label on it? Thanks.

Nope, not yet, I'm loving the clean brushed look without any stickers, but I may try in the future