GT Sport Livery Editor Thread

  • Thread starter Snaeper
  • 3,669 comments
  • 560,770 views
Status
Not open for further replies.
full


I promised a release on Halloween, and here we are: the Most Wanted M6 (using the M6 Power Livery), along with Cross' Corvette are shareable, under the tag nfsmostwanted/mostwanted.

full


Cross' Corvette is a Gr.3, and while I like the car's performance, the livery I didn't take too much liberty of time, since I only used up an hour yesterday. The logo is really lazy, and the siren lights are pretty jury rigged, but everywhere else is alright.
 
Well today, seeing as the Mileage Exchange updated, and my daily prize was a duplicate car of something i already had won as a prize previously, I thought i would set out to make a livery in about 20-30 minutes. It is nothing special and certainly not the most elaborate of designs, but im still happy with how this Vulcan came out in the end!

Gran Turismo™SPORT_20171031104942.png

Gran Turismo™SPORT_20171031104926.png
 
That’s great. I was literally just thinking it would be fun to do a DriveClub livery in GT.
 
Maybe even a "tips and tricks" collection.

For the above 2 questions:

1) I was trying to put racing stripes under the wing of a Porsche GT3 RS 991,
- could not see what I was doing, the wing was in the way
- in the end must have used the wrong part of the car. I believe I tried body / roof, but nothing appeared.

2) I was using a decal which did a soft transition from the base colour to the decal colour.
However I, wanted to do this over the sides and the back. Is there a trick to match the decal transition stage between different surfaces?
Seems like it does work using the soft transition on the other surface, but it really is a lot of trial and error.
 
My door panel art gets covered up by the racing number when using the livery in Sport Mode. I was in my Viper Gr. 4 last night, spent hours making a nice logo on both doors, just to have a big fat white Gran Turismo racing number slapped right on top of it! I hadn't seen this mentioned before. Does this mean we should at least placehold the numbers when we are designing and avoid the number area for logos? Or is there a way around this? As far as I know it's not possible to move the racing number in the livery editor after adding it.
 
My door panel art gets covered up by the racing number when using the livery in Sport Mode. I was in my Viper Gr. 4 last night, spent hours making a nice logo on both doors, just to have a big fat white Gran Turismo racing number slapped right on top of it! I hadn't seen this mentioned before. Does this mean we should at least placehold the numbers when we are designing and avoid the number area for logos? Or is there a way around this? As far as I know it's not possible to move the racing number in the livery editor after adding it.
Why can't you remove the number after placing it?
 
Why can't you remove the number after placing it?

Thanks for the response, I know that I can use the number as a placeholder. What I would like to be confirmed is that the number CANNOT be moved. Or if there is another way other than avoid putting logos in the number area.
 
My door panel art gets covered up by the racing number when using the livery in Sport Mode. I was in my Viper Gr. 4 last night, spent hours making a nice logo on both doors, just to have a big fat white Gran Turismo racing number slapped right on top of it! I hadn't seen this mentioned before. Does this mean we should at least placehold the numbers when we are designing and avoid the number area for logos? Or is there a way around this? As far as I know it's not possible to move the racing number in the livery editor after adding it.

Nope, unfortunately we can't move the racing number. Only option we currently have is to design around that space which I do hope changes in the future. And in sport mode you'll always get the default style of racing number so it doesn't matter which one of styles you use in the livery editor either.
 
Hi everyone! I'm Luca from Italy..firs of all sorry for my bad english. I'm a graphic designer, i create liveries for real life (e.g. i've made some lambos from Blancpain GT like raton racing, antonelli team, ombra team). I also collaborate with milestone making liveries for motogp series, ride, mxgp ecc..

These are some liveries i've made for GT Sport
22905018_10214398673945771_8241738243505342441_o.jpg


22904664_10214395620349433_3657973418601295800_o.jpg

23116790_10214388479090906_7477011062715556443_o.jpg

22829038_10214375278920910_1611472149384473672_o.jpg

22792618_10214374249415173_919190900595822079_o.jpg

22829287_10214371051175219_5550392178338961069_o.jpg

22791894_10214369491936239_4645383556036663861_o.jpg

22791692_10214362416039346_6582956696104907017_o.jpg

22860047_10214355615109327_2273431856749184453_o.jpg

22770617_10214334507101640_6774314066550432394_o.jpg

22712343_10214337680900983_9141629812477072865_o.jpg

22426487_10214245848365227_4217764232413190836_o.jpg
 
I absolutely blame halloween for making me come up with this idea for a devilish looking vehicle, so apologies for all the overzealous use of Red, i at least tried to use the Lempel logo in unique ways as subtle extra detail to some areas, quite fun to work with :P

Gran Turismo™SPORT_20171031154024.png

Gran Turismo™SPORT_20171031154038.png
 
Some WWII fighter liveries I've been playing with.

Wanting to keep the cars to the proper Countries eg. BMW - Germany, Toyota - Japan (the WRX was my first try so need to change it). So working on a Aston Martin - England and a Ford / Chev - American. Even want to try and keep the sponsor brands correct eg. BBS for Germany etc.

IMG_0725.JPG

IMG_0726.JPG
 
Some WWII fighter liveries I've been playing with.

Wanting to keep the cars to the proper Countries eg. BMW - Germany, Toyota - Japan (the WRX was my first try so need to change it). So working on a Aston Martin - England and a Ford / Chev - American. Even want to try and keep the sponsor brands correct eg. BBS for Germany etc.

View attachment 685772
View attachment 685773

Ooh yes. More of this, please!
 
Hi everyone! I'm Luca from Italy..firs of all sorry for my bad english. I'm a graphic designer, i create liveries for real life (e.g. i've made some lambos from Blancpain GT like raton racing, antonelli team, ombra team). I also collaborate with milestone making liveries for motogp series, ride, mxgp ecc..

These are some liveries i've made for GT Sport
22905018_10214398673945771_8241738243505342441_o.jpg


22904664_10214395620349433_3657973418601295800_o.jpg

23116790_10214388479090906_7477011062715556443_o.jpg

22829038_10214375278920910_1611472149384473672_o.jpg

22792618_10214374249415173_919190900595822079_o.jpg

22829287_10214371051175219_5550392178338961069_o.jpg

22791894_10214369491936239_4645383556036663861_o.jpg

22791692_10214362416039346_6582956696104907017_o.jpg

22860047_10214355615109327_2273431856749184453_o.jpg

22770617_10214334507101640_6774314066550432394_o.jpg

22712343_10214337680900983_9141629812477072865_o.jpg

22426487_10214245848365227_4217764232413190836_o.jpg
How can I find your liveries?? Your BMW is absolutley stunning!!!
 
Status
Not open for further replies.
Back