GT Sport Livery Editor Thread

  • Thread starter Snaeper
  • 3,669 comments
  • 567,011 views
Status
Not open for further replies.
Really nice, but didn't they banned all alcohol/tobacco uploaded livery? Martini sticker is gone and a few more.. sorry for my bad english and if I posted this wrong.

I had a nice JPS Hurracan livery yesterday, might be gone when I get home ; ;
 
Lol, how soon till people start making fake logos of Martini, Marlboro, Coors, Budweiser and other brands that are banned ? Anybody want a nice cool Badweezer ?
 
full

Back to making originals, but with a dab of inspiration. This week, I had a go at the rather unwieldy NSX Gr. 3. The car that I would give the codename "Moonlight Special" would end up being a tribute mashup of Ayrton Senna. I have my own reasons to make this, but well, it's too bad I can't have all the sponsors painted gold. A bit messy here and there, and I might come back to redo some bits. But 3 hours well spent.

Next week's plans? Hmm.. maybe I'll get back to you on that. I still have a Viper to mess with!
 
Really starting to hate the front wings on the Aston GT3! Making the flying buttress a different colour to what is underneath is the stuff of nightmares :banghead:🤬
 
I had a nice JPS Hurracan livery yesterday, might be gone when I get home ; ;
I saw an Aston Martin with JPS livery yesterday, looks gorgeous!

MMX
My favorite band, and the last one I seen in concert, many years ago...
UYxVD7H.jpg


owr8NQy.jpg


Thanks to Famine's logo upload, I was able to do my vision for a GTP car.
qQtwVaZ.jpg


j8Jphe9.jpg
That redyellow vw is sic! Gorgeous simple genius!
 
Last edited by a moderator:
  • Like
Reactions: MMX
MMX
My favorite band, and the last one I seen in concert, many years ago...

Awesome AC/DC livery 👍

My last AC/DC concert in 2008 .. Rock'n roll train tour ! :cheers:

IR
 
  • Like
Reactions: MMX
wish they kept alcohol decals though, tabacco and anything else is fine to lose because they shouldnt be on cars... WHAT ABOUT Jack Daniels though, i was going to recreate the V8 Supercar using a decal of it.
 



Well I got lucky in the Decal lottery, whilst the iq option logo would of been better for me split into the text and the image, it will do! Super close, now, I think if a Hackett London logo magical arrived that I could put on the rear wing end plates I'd let it go...

It should also have Bilstein coil over logo and a Pagid RS logo in white, on the blinking flying buttress front wing panel but it's close enough without ;) I have tested with the in game Bilstein logo and I think I can make it so it only appears where I want it...I think...


 
Anyone got any tips for quickly replicating the same livery on multiple cars. I love the simplicity of the green/yellow mclaren p1 and have put in on 3 cars so far, however the grind of doing the same livery on every car i want to drive just isn't really worth it. I know you can't directly transfer livery from one car to another but anyone got any tips or time saving methods?
 
Anyone got any tips for quickly replicating the same livery on multiple cars. I love the simplicity of the green/yellow mclaren p1 and have put in on 3 cars so far, however the grind of doing the same livery on every car i want to drive just isn't really worth it. I know you can't directly transfer livery from one car to another but anyone got any tips or time saving methods?

Unless PD adds a grouping layer function with option to save as decal, your only option is to create some base livery SVGs and upload them to use as a base livery on each car.
 
Another Cup Car it's the
LeiderGeilRacing TT Cup wich comes in 4 different colors, blue, liquid metallic, red and green.

#audi #tt #gr4
 

Attachments

  • ap_A8055A71-0811-4ACE-8805-9EA45440B057.jpeg
    ap_A8055A71-0811-4ACE-8805-9EA45440B057.jpeg
    67.8 KB · Views: 51
  • ap_248DA0FC-FAB9-475E-A96E-E6DA148C5C03.jpeg
    ap_248DA0FC-FAB9-475E-A96E-E6DA148C5C03.jpeg
    74.5 KB · Views: 48
  • ap_33363C94-388D-4A4B-8BA6-3AD1833896A4.jpeg
    ap_33363C94-388D-4A4B-8BA6-3AD1833896A4.jpeg
    73.2 KB · Views: 47
I think the uploader may be imminent for everybody. There used to be a note under the sign in page of www.gran-turismo.com that said something along the lines of 'Only members with an invite from Sony can access these features' but its gone now! :D

I also noted that starting last night, when trying to log in, instead of throwing an error it now shows me this message:

This service is not available yet.
We are currently making preparations to release the service to everyone. Please wait until the start of the service.


- Sign-out
- Home
 
Would it be a idea to cut the brands in multiple decals? So Martini would become 2 shapes (Mart ini). That way we could combine them in the editor?
Why not just Martin. and then you add the last I with a shape :P
 
started with this one quite some time ago, needed some inspiration:
K9a4g5ThBptP79szbVxUE7NN9WHwKebAOZv2ytVQXj6pegOQI10Fukvejd-Dw0OjJcNAGfJa3FECjHXkZb9qiIQuFV9cm5WNIOyx=w391-h220
e_2bcH7Z0NNaFjbVYXZVpuDgH5sFRcy2m7z9ZrMWduvNTB-iNDTg7Q1lZvxNKdcCoPXQ5R2YbQzXQyiHP6ze0DI0QtW76Whibqq6=w391-h220
IQ1_AExsLgPMFFcbafoNqIYQC7o55WCIFB7A1yXysqCuCezeyypsGtUtuOZXUJOWOWRXVk8V4faIWi2TW7bahofoYO1R15ARGe1D=w391-h220
r_lj6DQgMgdXulGF5XFyjk_rN5orQiYBUse8URYoHrhKPCMyd0Wa6vdUDhD1aFH-BeDgPgkJhDXJ7bWTJl_TKCJ8lEjSUXiGQ9xa=w391-h220



This one came quite spontaniously:
oM6qx9ZiK4qpHQadMsFTfW8jrBtT6qaHe-p00HcLhsb8E23DJWf4ZOzxOaFjwFhBTf_jjXVL9XI3vC1-sQJNfwp3WU3LBE8ZWqom=w391-h220
AZ7cbE2XbSqLEcQp8fRoo4zFvAOkX3ytR_061tVz02B32Afyd7-DubC-sOa79gogWqhaHPHRggrDSbKQ86ptWwxaJopi7lCnqHdw=w391-h220

UCraNY6vJ86TDcmAGLeFSM28Zkfpysn9FAvliw32CEOhECwlCrFN0YgsXXZAdUHxF6c1Aubq9hUYwwuMuical1gdZSUNXvK-mk1D=w391-h220
taPkJGiQZ3x-SPe_ku41MBY90t2rlke4EsDEYPyhWu8M3mSNsa0Pbeor9O3psetU-1bVjTw9wE8_j0qxEfDONhcjZHAbABf-NN5H=w391-h220


To have myself declared incapable to work, I made something contrasting to the first one, showing my split personality:
kImB9-6JegqrUzo0l3zCgR_opr-P5IcqmdMIsxTZNRefN7QgTTWnaYqxYFQA7zqloMz4D73bcBtrArlN7PbGt9XzknUQ8j3aOW-y=w391-h220
bltVbeI-O0EYHXV_s3osG0UKT2JKqAL1E5ofvwve3MndL8LMmeHQb3xcLhTiQ9gPateCtjs4gWZLEjuhld6a6b8kig7rwjLURF8B=w391-h220
04tGzRgzRAghD-CzzJIoIYh4k2OvM8MvP1FTholGeZb3MRoOP9HjsOVYdxNEJr3C8CFE65NkVemYQbvhHSVUy4u1rE2YWOvETkUq=w391-h220
v09E3e8feJhnQh_71SHwzOVkwCO1lY1_Dg94uz8CvOr81_mwRVcob-NrYHD2glC1CkCalgXRVhpZRAwufHKcBAoZOm9iwLG6ftRR=w391-h220
 
After creating the BMW M Power - LMP-E30H I got really intrigued by the idea of creating even more fictional prototypes. Unfortunately there is currently no American manufacturer in LMP1, but GM is very successful in the IMSA series with the Cadillac DPi, therefore it is not too far fetched to see some American machinery at Le Mans in the near future. When the decal uploader went live, the Chevrolet emblem was one of the early decals that got uploaded and so I decided to create a Chevrolet LMP1.
Regarding the design, I took my inspiration for the colour scheme and the sponsors from the Corvette C7R. To make my base car (Porsche 919 Hybrid) look a little bit more like a Chevrolet, I've tried to replicate the grill of the Chevrolet SS Nascar on the limited space that is available on the front.
In my oppinion this is another nice addition to the game's LMP1 lineup.
Tags: #chevrolet; #verizon; #lemans

Verizon Chevrolet - DPLMH-01 #3 & #4

20171114155216.jpg


20171114155227.jpg


20171114155245.jpg


20171114155257.jpg
 
Do you guys remember what livery I posted here A LOT that I said I'd make? ;) well.. It's done.

yasid-oozeear-gt2020-nissan-calsonic.jpg


Last time I'll post that rendering, I promise. Click here to see mine!

I need your feedback :D

Awesome ! Your blue is closer to original Calsonic, but the metallic paint of the render is temptating too ! I also see some decals I was waiting for (Kyosho, Impul...)
 
I have a folder on the desktop filling with Decals, need that uploader!!! feel free to send me a message if theres a decal you still are waiting to see, I'll see what I can do
 
Awesome ! Your blue is closer to original Calsonic, but the metallic paint of the render is temptating too ! I also see some decals I was waiting for (Kyosho, Impul...)
I would’ve gone metallic if I could, but had to use some blue squares here and there to cover up a few things. :)
Yeah I had @Lord Protector help me to upload the decals I needed in order to make a 100% replica. Had to make the Calcom decal from scratch though, couldn’t find any pictures of it. Made it from mixing two different fonts :lol:
Ohh, this blue bullet :drool:
Really glad you guys like it :D I’m quite proud of it. :)
 
Status
Not open for further replies.
Back