GT Sport SVG request thread (Please read 1st post)

  • Thread starter daan
  • 10,545 comments
  • 597,089 views
@bradledj - could I bother you for this one Adelaide_United_FC-logo-63A82F2C62-seeklogo.com.png to have the text separate?
 
@K32

It would be possible to spend hours on the GTSport character... I didn't spend that long... but it might pass a glancing test... Fading to transparent for the background part doesn't look great, and I can't vertically fade to transparent with the front layer that already uses a horizontal gradient.

DgkQkP7XcAUpyLO.jpg:large

That's looks pretty fine just as it is. ;) Would it be possible to make the colours in the front layer a bit more saturated, and add just a tiny yellow/gold gradient at the right side (near the end of the left glove in your photo)? Sorry for the nagging.

Looking good .I can't tell from the pic if you used the rear side vents I put on my brothers account (they are fairly dark) .I did a more contrasting version
found here.

Yes I used them, but I had to colour them black. The shape of your version was spot on, though the border that you've done around the vent didn't fit well onto the car. It would've been much less time consuming I imagine if you just drew the outline of the vent with black on the inside (no borders, no light reflections on the edges, etc.), and three black to transparent gradients within it. Still thank you heaps for the amazing work. :)
 
Would someone be interested in making this livery for the Toyota 86 GT4?:

car_photo_560620.jpg


9AA84564-9E76-4038-ACE4-73639D401A0E_1.jpg


09298F48-9BDA-4467-9043-C3ECE221A421_1.jpg

Quick update! Ive not forgotten about this, just been incredibly busy. However i have today off work and im getting stuck into it. I will be needing some decals made. And as a bonus, once its done i will release the orange and red version too.

Work in progress, excuse the cruddy photo - difficult to plug a USB dongle into a tablet!

20180626_094817.jpg
 
Quick update! Ive not forgotten about this, just been incredibly busy. However i have today off work and im getting stuck into it. I will be needing some decals made. And as a bonus, once its done i will release the orange and red version too.
No worries, take your time i'm not in a hurry :) and it is a challenging livery to make 👍.
 
No worries, take your time i'm not in a hurry :) and it is a challenging livery to make 👍.

It's extremely difficult! Those squares aren't square, every one is being made individually from a mix of squares, curves, triangles etc. My big concern at the moment is that i will run out of decals but i did just use 20+ on the door handles - they were a pig to do!! (You will see clearer when the livery is released) Also, the colours arent final at this point, they may yet be revised upon completion.

20180626_112911.jpg
 
Does anyone want to give this one a go for me? Advanced appreciativity! (I know - that ain't a REAL word...)

View attachment 746611

If possible, could a second version be done as a "mask" (or stencil, transparency or whatever they're called)? You know - black background with the words cut out...

This ok @ScotteDawg? I've removed the white background, and the decal should be colourable so you can put it on whatever background you like. It will colour the whole decal though, so the 'Racing' would be the same colour as the rest. Let me know if you'd like anything else doing to it.
 

Attachments

  • crisp_white.zip
    4 KB · Views: 22
It's extremely difficult! Those squares aren't square, every one is being made individually from a mix of squares, curves, triangles etc. My big concern at the moment is that i will run out of decals but i did just use 20+ on the door handles - they were a pig to do!! (You will see clearer when the livery is released) Also, the colours arent final at this point, they may yet be revised upon completion.

View attachment 746720

Nevertheless it looks amazing at this stage 👍 :gtpflag::bowdown: from me, a guy who can't even put carbon fiber on rocker panels in livery editor :embarrassed: :lol:.
 
Last edited:
Hi guys,

I cannot find a higher res version of this logo and have tried to Image Trace in Illustrator but can't get it to come out well. Would anyone be able to give it a go.

Sky King Bird.jpg


Thanks.
 
Perfect, thanks mate.

Out of interest, did you find a way to trace this cleanly or did you redraw it?

Redrew it, 98% of what I post here is redrawn. The inner shapes were easy to redraw and the risk with tracing is that each of the 70ish shapes in the band around the edge would end up with about 10 nodes or something... drawing it by hand meant 2 nodes per shape.
 
Right, quite a shopping list here for the GT86s i'm making. I need quite a few please! Provided the best pictures i could fimd but some are really difficult to mke out what they are so i will understand if they cant be made. So in total i need the Toyota Material Handling, Racing4mnd.org, gprmltd.com, S Hodgetts, J Fletcher, the square thingy between GT4 and TRD. Then on the lower sides i think is what might be SS international and Sportsline Suspension and that oval thing at the end - i really have no idea what that is! So quite a shopping list. Usual request of making them available for me to download from your garage please. Thanks!

Screenshot_20180620-210547.jpg
Screenshot_20180626-131256.jpg
Screenshot_20180626-135151.jpg
Screenshot_20180626-135444.jpg
 
Right, quite a shopping list here for the GT86s i'm making. I need quite a few please! Provided the best pictures i could fimd but some are really difficult to mke out what they are so i will understand if they cant be made. So in total i need the Toyota Material Handling, Racing4mnd.org, gprmltd.com, S Hodgetts, J Fletcher, the square thingy between GT4 and TRD. Then on the lower sides i think is what might be SS international and Sportsline Suspension and that oval thing at the end - i really have no idea what that is! So quite a shopping list. Usual request of making them available for me to download from your garage please. Thanks!

View attachment 746754 View attachment 746755 View attachment 746756 View attachment 746757

The square thing is a QR Code, the Oval thing says DeSIGNS..

It's clearer in the actual Flickr image.

upload_2018-6-26_14-21-28.png
 
I see, for some reason i can never access full images. Anyway, theres another i need too! This spanner thingy on the lower sills.

Screenshot_20180626-142715.jpg
 
I see, for some reason i can never access full images. Anyway, theres another i need too! This spanner thingy on the lower sills.

View attachment 746762

I've put together a few for you @Lebowski. If @daan has the Stahlwille logo as you need it, that's ace, because I've found it but in the incorrect format at the moment. Can't find logos for SS International (?), deSigns or Sportsline suspension so far though.
 

Attachments

  • GT86.zip
    15.3 KB · Views: 22
I've put together a few for you @Lebowski. If @daan has the Stahlwille logo as you need it, that's ace, because I've found it but in the incorrect format at the moment. Can't find logos for SS International (?), deSigns or Sportsline suspension so far though.

Here's a QR code. Not the exact one on the car mind you, in case you were going for 100% accuracy!
 

Attachments

  • qr_code.zip
    2.8 KB · Views: 23
Here's a QR code. Not the exact one on the car mind you, in case you were going for 100% accuracy!

Cool thanks very much. What's your user name so i know what to look for in discovery or do you have a link to your garage please as I can't upload other people's decals from a mobile (have no pc)
 
Cool thanks very much. What's your user name so i know what to look for in discovery or do you have a link to your garage please as I can't upload other people's decals from a mobile (have no pc)
Same as this forum, bradledj. I haven't uploaded them yet. I'll do it shortly and tag GT86 on each of them.
 
Could someone please do these for me if possible. I've attempted myself but have not been able to get them right, and my patience can't take much more tinkering. Plus in not very tech-savvy with this kinda stuff.

Many thanks in advance!!!
 

Attachments

  • 2000px-Flag_of_Wisconsin.svg.png
    2000px-Flag_of_Wisconsin.svg.png
    25.9 KB · Views: 21
  • Milwaukee_Mile_logo.jpg
    Milwaukee_Mile_logo.jpg
    19.9 KB · Views: 19
Cool thanks very much. What's your user name so i know what to look for in discovery or do you have a link to your garage please as I can't upload other people's decals from a mobile (have no pc)
All that I have done now uploaded @Lebowski. Hope they work out well, I'm looking forward to seeing the finished article! Tagged them all with gt86 so you should be able to find them. I've done:
  • Toyota Material Handling
  • Racing4mnd.org
  • gprmltd.com
  • GPRM logo
  • S Hodgetts & J Fletcher names
  • QR code
  • Stahlwille spanner*
*Think I've got it as you need it on the car. Looked back on the pick and noticed that it's not just white/transparent as the text is still red over the orange bodywork. I've coloured it as a base red, if you need the shade changing let me know and I'll tweak it with an RGB code.
 
All that I have done now uploaded @Lebowski. Hope they work out well, I'm looking forward to seeing the finished article! Tagged them all with gt86 so you should be able to find them. I've done:
  • Toyota Material Handling
  • Racing4mnd.org
  • gprmltd.com
  • GPRM logo
  • S Hodgetts & J Fletcher names
  • QR code
  • Stahlwille spanner*
*Think I've got it as you need it on the car. Looked back on the pick and noticed that it's not just white/transparent as the text is still red over the orange bodywork. I've coloured it as a base red, if you need the shade changing let me know and I'll tweak it with an RGB code.

Thats brilliant, thanks very much. As for the Stahlwille, if you could do that in just white with a transparent base that would be great thanks as it has to go over red and orange. Also, if you could do another version of the driver names that would be great too. The one you have done is perfect for the red and orange car but the blue and white has the names seperated and in full capitals.

I now have the base design complete and have started applying the sponsors etc so it will soon be done hopefully! Just need those missing ones on the side skirts of the blue and white 86!
 
Thats brilliant, thanks very much. As for the Stahlwille, if you could do that in just white with a transparent base that would be great thanks as it has to go over red and orange. Also, if you could do another version of the driver names that would be great too. The one you have done is perfect for the red and orange car but the blue and white has the names seperated and in full capitals.

I now have the base design complete and have started applying the sponsors etc so it will soon be done hopefully! Just need those missing ones on the side skirts of the blue and white 86!
Will have a crack at them tomorrow if I get chance. As for the missing ones, I’m stumped! :confused:
 
K32
That's looks pretty fine just as it is. ;) Would it be possible to make the colours in the front layer a bit more saturated, and add just a tiny yellow/gold gradient at the right side (near the end of the left glove in your photo)? Sorry for the nagging.

Jeeez, ya want it delivered on a bed on swan feathers and guilded with chrome?


... N'ah, Just joking, truth is I have terrible colour vision so for this kind of thing I very much rely on colour pickers and I just went with what I had. I've tried to bump up the saturation of the colours a bit although for all I know they're the wrong colours now :lol: Yellowed up the fist a bit and tried to neaten the fade out slightly. Zip attached.

DgpFOYqX0AMERza.jpg:large
 

Attachments

  • Original.zip
    18.2 KB · Views: 19
Back