GT Sport SVG request thread (Please read 1st post)

[Racer294]

It looks like the car does not use the gradients in the logo provided, so did both.

Thank you! Will give them a try.

 

[p78]

damn that gekko is pretty @Maninashed

 

[Panoz]

Not the best quality picture to be honest but Kar Kraft's logo wasn't easy to find.

If anyone can crop out the KK out of the picture will be much appreciated.

 

[ringkurier]

Hi @Panoz

excuse me my good sir, but I tested my skills with your logo.

Feel free to check if this is fine for you. Otherwise I will not be mad if you ask again someone here who knows what to do

Edit: Made a masked version too, to be sure that I did not misunderstood your request.

37 is "KK", 38 is the mask.

 

[Panoz]

Hi @Panoz

excuse me my good sir, but I tested my skills with your logo.

Feel free to check if this is fine for you. Otherwise I will not be mad if you ask again someone here who knows what to do

Edit: Made a masked version too, to be sure that I did not misunderstood your request.

37 is "KK", 38 is the mask.

Great job and thanks on both of them!

Done more than I asked for with 2 decals to work with.

 

[Maninashed]

damn that gekko is pretty @Maninashed

Looks like someone else had a good go at it HERE.
Have not applied the livery to get a comparison close up yet. No decals/s shared that I could find.
Edit:

Spoiler: Comparison shot.

 

[baldgye]

Looks like someone else had a good go at it HERE.
Have not applied the livery to get a comparison close up yet. No decals/s shared that I could find.
Edit:

Spoiler: Comparison shot.

View attachment 883509

I feel like the one on the left has a bit more detail... but I wish I had that 'SIL' lettering and the driver names! haha

 

[TX3_Yunalesca]

Hello, i sent a request for stickers in game, I search final fantasy character, FFVIII, FFX, FFX-2, FFXIII

If you can, it's really perfect and I'm so happy

 

[Maninashed]

I feel like the one on the left has a bit more detail... but I wish I had that 'SIL' lettering and the driver names! haha

Like this?

 

[Cytoria]

Hello, i sent a request for stickers in game, I search final fantasy character, FFVIII, FFX, FFX-2, FFXIII

If you can, it's really perfect and I'm so happy

Welcome to GTPlanet!

Have a look here, you may find something for you!

 

[baldgye]

Like this?

...well damn!

And where did you get the 'sil' from? I couldn't find a decent shot of it to try and match up the fonts (do you have the 'sil' solo by any chance?)!

Thanks again mate your work in here is the most impressive and coolest **** I've come across in a forum

 

[Maninashed]

...well damn!

And where did you get the 'sil' from? I couldn't find a decent shot of it to try and match up the fonts (do you have the 'sil' solo by any chance?)!

Thanks again mate your work in here is the most impressive and coolest **** I've come across in a forum

Sil on it's own (not tested) should be OK. Font is Maiandra Demi Bold Italic GD. Found that by looking through pdf files found HERE.

 

[TX3_Yunalesca]

Welcome to GTPlanet!

Have a look here, you may find something for you!

thanks mate, but i don,t find in great quality, i know how its hard to create stickers less than 15ko on GT^^

 

[baldgye]

Sil on it's own (not tested) should be OK. Font is Maiandra Demi Bold Italic GD. Found that by looking through pdf files found HERE.

I tried digging around their site but I must have clicked everything bar that!

Thanks so much!

 

[CayenneGTS]

Once more, I need your kind help to convert this image into an svg file.

Thanks as usual for your time!

 

[hemisport15]

Hey everyone, would it be possible to have the below turned into decals? If this is too much work to ask for I totally understand. This is on the simple side for their logos/artwork, but it still seems pretty intricate to me.

Could this be cropped into 3 separate images? One of the character, one of the right text, and one of the bottom logo/link? Also can it be transparent so it's just the lines and no white boxes? (that's probably a stupid question but I'd like to be safe)

Just the text from this beanie

and lastly the top sticker from this image.

One final question - Would it be possible to isolate just the hands from any of the images that I've provided too?

Thanks!

 

[Maninashed]

Once more, I need your kind help to convert this image into an svg file.

Thanks as usual for your time!

Here you go.

 

[Maninashed]

Hey everyone, would it be possible to have the below turned into decals? If this is too much work to ask for I totally understand. This is on the simple side for their logos/artwork, but it still seems pretty intricate to me.

Could this be cropped into 3 separate images? One of the character, one of the right text, and one of the bottom logo/link? Also can it be transparent so it's just the lines and no white boxes? (that's probably a stupid question but I'd like to be safe)


Thanks!

Here is the 2nd one split up, and in full.

 

[CayenneGTS]

Here you go.

Fantastic! Thanks!

 

[hemisport15]

Here is the 2nd one split up, and in full.

Thank you so much! That looks perfect.

Are the others going to be too difficult to convert? I've been reading through the tutorial thread and it seems to be a little much for me.

 

[p78]

@hemisport15
at first things may seem hard and undoable, but you should be able to get there.
agreed, the learning curve may be steep.

 

[Adam Barber]

Can anyone help me with the side stripes on this, I want to do a tribute livery but can't find these stripes anywhere

 

[NBDESIGNZ]

Can anyone help me with the side stripes on this, I want to do a tribute livery but can't find these stripes anywhere

Try these

 

[Maninashed]

Thank you so much! That looks perfect.

Are the others going to be too difficult to convert? I've been reading through the tutorial thread and it seems to be a little much for me.

Use something like NFL logos as a guide to give you an idea what can be converted reasonably quickly into an svg under 15kb. Any more detail starts adding time to the process. One Arm and hand alone has around one hundred shapes just in the arm section. Nearly all the lines are wobbly. The only real option is to trace by hand. Took a couple of hours to do the first one and rearrange the parts for the last sticker. That text from the hat takes around a minute. There is a background shape for the sticker to allow for color change.

 

[hemisport15]

Use something like NFL logos as a guide to give you an idea what can be converted reasonably quickly into an svg under 15kb. Any more detail starts adding time to the process. One Arm and hand alone has around one hundred shapes just in the arm section. Nearly all the lines are wobbly. The only real option is to trace by hand. Took a couple of hours to do the first one and rearrange the parts for the last sticker. That text from the hat takes around a minute. There is a background shape for the sticker to allow for color change.

These are incredible! I really appreciate you taking the time to put all of this together and the tips are great too. Hopefully with some practice I'll be able to take care of this on my own.

 

[CPT_RowdyGiff]

Can someone look into converting this? No background. I’d like the two colors separate files so colors can be changed based on livery

 

[p78]

i still don't get gradients, either it's black or it looks plain shi tty.

any help with this pls?

Just the gradients would suffice btw

 

[CPT_RowdyGiff]

Anyone want to take a crack at this one???? lol

 

[GTP_Guido]

Can someone convert this one for me please?

 

[Sian]

Hi guys, could someone help me with these things please?
I'd like to complete my Cagliari Calcio sponsors for the cousin.

The Cagliari one please, with no background, in masked version too if possible.

This one in two parts duplicable please

And these two

(if the gradient is a pain, a plain version would be fine)

Thanks in advance guys!