- 1,196
- Australia
Here is PetroChina.
GT Sport SVG request thread (Please read 1st post)
- Thread starter daan
- 10,545 comments
- 579,515 views
- 2,933
- Derby, UK
- TPC_Abarber95
Thanks!
- 1,505
- Munich
Requesting a couple of logos for a livery I'm currently working on, I am aware that there is a Petrochina logo but its not massively high quality and is missing the highlight.
And BaoSteel
- 249
- Paris
Requesting a couple of logos for a livery I'm currently working on, I am aware that there is a Petrochina logo but its not massively high quality and is missing the highlight.
Here is BAOSTEEL.
#Edit
I am a bit late... @ringkurier
- 1,196
- Australia
Here you go. I had to reapply some gradients so maybe a little different.
- 874
- Australia
Life-saver mate!
Is it also possible for anyone to get this "Supporting Rural Fire Service" decal as well please?
Last edited:
- 1,196
- Australia
Because of picture distortion I traced a flat map of the track and picked my closest font.
- 874
- Australia
Hello again. I am looking to get the following decals converted into SVG for a FFF Racing Team livery replica, including certain criteria for each decal.
Orange1 Die Casting Aluminium
Orange1 Electric Motors
Orange1 Electric Motors/Foundry/Precision - would like these as separate files if possible.
Pertamax Fastron
Reafon
Sicme Orange1
Ramé
Roger Dubuis watches - may be very difficult, so I'm fine if the watches are sectioned into multiple decals to fit the upload size limit. First preference is the orange watch (Bathurst 12 Hour version) before the green watch (GT World Challenge version), but you can also allow the option to change the orange/green section into any colour in the livery editor if it makes things easier for you.
If you are able to get these all done, I shall refer to you as a decal god!
Orange1 Die Casting Aluminium
Orange1 Electric Motors
Orange1 Electric Motors/Foundry/Precision - would like these as separate files if possible.
Pertamax Fastron
Reafon
Sicme Orange1
Ramé
Roger Dubuis watches - may be very difficult, so I'm fine if the watches are sectioned into multiple decals to fit the upload size limit. First preference is the orange watch (Bathurst 12 Hour version) before the green watch (GT World Challenge version), but you can also allow the option to change the orange/green section into any colour in the livery editor if it makes things easier for you.
If you are able to get these all done, I shall refer to you as a decal god!
- 249
- Paris
Here the first ones.
Don't have the time to do the other ones.
And I can't do the watch. It would take me ages to do.
Cytoria
Staff Emeritus
- 2,615
- France
- Cytoria
To complete your demand, a wide selection of these decals is available on GTSwiki...
https://gtswiki.gt-beginners.net/decal/?lang=us&searchword=Orange1+&noid=1&type=0
And yes, the watches are very very complicated.
- 2,978
- In the walls listen'...
- cross_dmd
First time on this thread, and I'm looking to get the svg of this. If yu can , yoy are a godsend!:
- 1,196
- Australia
Here you go.
syntex123
Staff Emeritus
- 4,829
- Færder
- syntex123
- Syntex260Z
Roger Dubuis watches - may be very difficult, so I'm fine if the watches are sectioned into multiple decals to fit the upload size limit. First preference is the orange watch (Bathurst 12 Hour version) before the green watch (GT World Challenge version), but you can also allow the option to change the orange/green section into any colour in the livery editor if it makes things easier for you.
If you are able to get these all done, I shall refer to you as a decal god!
challenge accepted.
PROGRESS EDIT:
I know you said you primarily wanted the orange one, but with my quick search all I found was the green one in ok resolution. It will be separate so you can make it purple for all I care.
Last edited:
syntex123
Staff Emeritus
- 4,829
- Færder
- syntex123
- Syntex260Z
@Need4Speed685
Update on the watch
I just want to point out that this here is 100kb. So you definitely need a few pieces.*
And also. I can't make gradient decals (they show as one color in-game) so if you really want it that way, I suggest some of the other decal gods in here grab the finished watch when I'm done and further improve upon it. I'm doing the best I can with the tools I have, so I hope you're going to be happy when I'm done either way.
*this is before SVGOMG
Final update:
I think I bit off more than I want to chew. It's not impossible to finish, but I'm not motivated to continue. Sorry. If someone wants to pick up where I left, I will leave the SVG and font below.
Reference photo
Font (I used both bold and regular)
Update on the watch
I just want to point out that this here is 100kb. So you definitely need a few pieces.*
And also. I can't make gradient decals (they show as one color in-game) so if you really want it that way, I suggest some of the other decal gods in here grab the finished watch when I'm done and further improve upon it. I'm doing the best I can with the tools I have, so I hope you're going to be happy when I'm done either way.
*this is before SVGOMG
Final update:
I think I bit off more than I want to chew. It's not impossible to finish, but I'm not motivated to continue. Sorry. If someone wants to pick up where I left, I will leave the SVG and font below.
Reference photo
Font (I used both bold and regular)
Last edited:
- 3,177
- St helens, merseyside, England.
- crazybuttocks198
- Crazybuttocks19
Hi guys I'm looking to make this pattern into a transparent decal, but don't know how to go about it. I have on as a decal but would love to make it transaprent (see through) to make a 3d style similar to this image. As always appreciated in advance.
Last edited:
syntex123
Staff Emeritus
- 4,829
- Færder
- syntex123
- Syntex260Z
Best way to go around this is make it transparent. Then just layer them accordingly in-game. I'd help you but I'm a little tired of decals right now.
EDIT: Ok so I gave it a go. Didn't exactly get the same effect, but eh.
Last edited:
- 874
- Australia
- 2,978
- In the walls listen'...
- cross_dmd
Last edited:
- 1,196
- Australia
- 3,177
- St helens, merseyside, England.
- crazybuttocks198
- Crazybuttocks19
Cheers fella, works a treat.Best way to go around this is make it transparent. Then just layer them accordingly in-game. I'd help you but I'm a little tired of decals right now.
EDIT: Ok so I gave it a go. Didn't exactly get the same effect, but eh.
View attachment 925560
syntex123
Staff Emeritus
- 4,829
- Færder
- syntex123
- Syntex260Z
No problem, and thank YOU!
Less of a daunting task now that it is nearly done. You have to upload it when it’s done, I want to see the result. 
- 103
- New Brunswick
- SymonTrent4422
Last edited:
- 36,631
- Scotland
- GTP_daan
- 2,006
- United Kingdom
- AWRacing17
Hi all,
anyone able top get this down to the right size to upload?
anyone able top get this down to the right size to upload?
- 5,007
- Puerto Rico
- MW3Fan34
- 1,196
- Australia
Really too much text for a single decal. The smallest text with "inspired by Passion - Driven by Innovation" was over 1000 nodes. Replaced that with font and simplified each letter individually then recombined (now 461 nodes). Redid the gradients as such heavy reduction with SVGOMG messes them up a little anyway.
Got it in one with board3 file (SVGOMG level 1) .Including files board and board2 for a bit higher precision with 2 decals (use duplicate and replace for alignment).
- 5,007
- Puerto Rico
- MW3Fan34
Similar threads
- Sticky
Latest Posts
-
-
-
GT7 + PSVR2 successful! But no other Racing Games on PSVR2 announced?- Latest: sonnyboychris
-
