GT Sport SVG request thread (Please read 1st post)

[krisduv]

Best to keep all fill and stroke assigned to the individual paths and not the group.

Duly noted. Can prevent headaches! Thanks

 

[Raybrig100]

@Maninashed @krisduv managed to get it uploaded....

However I learned something new today....you can upload to the decal uploader on GTS site from tour phone...had to install Opera and change to desktop.....only taken me 3yrs to find that out ....thanks Liner32...

Mind blown today

 

[Need4Speed685]

Got some decals to convert into SVG format to complete my replica of the #19 Pro-Am entry from FFF Racing Team in GT World Challenge Europe.

Kiku-Masamune Sake - I would like both the vertical and horizontal logos below transparent.
Vertical

Horizontal

I'd also like these driver names in both white and black below, with their respective country flags.

Thank you in advance if you get them done!

 

[krisduv]

Got some decals to convert into SVG format to complete my replica of the #19 Pro-Am entry from FFF Racing Team in GT World Challenge Europe.

Kiku-Masamune Sake - I would like both the vertical and horizontal logos below transparent.
Vertical

Horizontal

I'd also like these driver names in both white and black below, with their respective country flags.
View attachment 943849
View attachment 943848

Thank you in advance if you get them done!

 

[foxghost18]

I was wondering if it would be at all possible to convert these into svgs??

 

[GTFan24]

@Maninashed Bit of a difficult request here:

Can you make an SVG of this highlighted blue shape seen in the Alphatauri livery? The Alphatauri logo seen inside the shape nor the text next to it wont be necessary btw.

 

[foxghost18]

I was wondering if it would be at all possible to convert these into svgs??

And after I posted this, I found three of them already out there. The first one (subzero) and the bottom two, I have now. Thanks in advance!!

 

[Panoz]

I done my best to get a up close and clear photo of this "BTL" logo seen on the interior of the Beetle Gr.3.

The logo itself is a bit of a mystery but I thinking it a unique shorthand for BeeTLe that the VW designers created for the car.

Many thanks to anyone who can trace out of the logo. 👍

 

[Maninashed]

I done my best to get a up close and clear photo of this "BTL" logo seen on the interior of the Beetle Gr.3.

The logo itself is a bit of a mystery but I thinking it a unique shorthand for BeeTLe that the VW designers created for the car.

Many thanks to anyone who can trace out of the logo. 👍

From a search of this thread. BTL.

 

[Higny]

@OrranD
I tried to make something from your pic.

 

[tankuroded]

Requesting the GM Certified Service text logo:

 

[Need4Speed685]

Hello once again! I would like these following decals converted into SVG format.

I have these driver names, in both black & white, with their respective country flags for both left & right sides of the roof pillar.

Beddeleem

Delporte

Luc Moulin Architecte - I would like the white behind the Luc Moulin text removed and made transparent, but keep the Architecte text white as it is already.

MASM Cogny - There's a white stroke I did around this logo, make sure to keep it in.

Stalift

Tradeco - I made all text in this logo white, just to let you know in case you can't see it.

TRBA - don't get rid of the white background inside the green border.

Wattiaux

Willy Naessens Group

Those are all the decals I need. Thank you in advance if you manage to get them all done, it's greatly appreciated!

 

[OrranD]

@OrranD
I tried to make something from your pic.

NICE! Thank you for your time and creativity. I just tried it and it works
Be safe and have a nice day.
See you on the track!

 

[Higny]

Requesting the GM Certified Service text logo:

I just made the "Certified Service" text decal. Hope this is what you were asking for.

Hello once again! I would like these following decals converted into SVG format.

I have these driver names, in both black & white, with their respective country flags for both left & right sides of the roof pillar.
View attachment 944854
View attachment 944853
View attachment 944856
View attachment 944855

Beddeleem
View attachment 944857

Delporte
View attachment 944858

Luc Moulin Architecte - I would like the white behind the Luc Moulin text removed and made transparent, but keep the Architecte text white as it is already.
View attachment 944865

MASM Cogny - There's a white stroke I did around this logo, make sure to keep it in.
View attachment 944859

Stalift
View attachment 944860

Tradeco - I made all text in this logo white, just to let you know in case you can't see it.
View attachment 944861

TRBA - don't get rid of the white background inside the green border.
View attachment 944862

Wattiaux
View attachment 944863

Willy Naessens Group
View attachment 944864

Those are all the decals I need. Thank you in advance if you manage to get them all done, it's greatly appreciated!

Here the first part.
Added one colour variations to some decals

 

[krisduv]

Hello once again! I would like these following decals converted into SVG format.

I have these driver names, in both black & white, with their respective country flags for both left & right sides of the roof pillar.
View attachment 944854
View attachment 944853
View attachment 944856
View attachment 944855

Beddeleem
View attachment 944857

Delporte
View attachment 944858

Luc Moulin Architecte - I would like the white behind the Luc Moulin text removed and made transparent, but keep the Architecte text white as it is already.
View attachment 944865

MASM Cogny - There's a white stroke I did around this logo, make sure to keep it in.
View attachment 944859

Stalift
View attachment 944860

Tradeco - I made all text in this logo white, just to let you know in case you can't see it.
View attachment 944861

TRBA - don't get rid of the white background inside the green border.
View attachment 944862

Wattiaux
View attachment 944863

Willy Naessens Group
View attachment 944864

Those are all the decals I need. Thank you in advance if you manage to get them all done, it's greatly appreciated!

To complete @Higny's post

 

[Need4Speed685]

Thanks @Higny and @krisduv for the decals! Just waiting on the TRBA and Stalift decals and I'm all done with the last FFF Lamborghini replica.

 

[Higny]

Thanks @Higny and @krisduv for the decals! Just waiting on the TRBA and Stalift decals and I'm all done with the last FFF Lamborghini replica.

The TRBA and the Stalift, but without gradients

 

[SportCoaster]

Can you make a Decal of the Title Logo of The Fairyland Story from this Flyer?

 

[krisduv]

Can you make a Decal of the Title Logo of The Fairyland Story from this Flyer?

 

[Higny]

Can you make a Decal of the Title Logo of The Fairyland Story from this Flyer?

Erf, I'm late...

 

[jemuca]

Hello guys, looking for any help with the following logo, I know it might not be ideal but any help its appreciate it. Thx

 

[DS13_supergt]

hi everyone, i was searching someone that posts every decal to make a super gt gt300 replica, every livery is fine, i'm asking this because i noticed that there are many people that post the decals for gt500 cars.
So if you know someone that posts every decal to make a super gt gt300 replica please let me kwow.
Any kind of help is appreciated

 

[Maninashed]

Hello guys, looking for any help with the following logo, I know it might not be ideal but any help its appreciate it. Thx

Try this.

 

[foxghost18]

So sorry for making such a difficult request! I don't know how hard these things can be. I just wanted some mini ninjas so I could do a car about the game. Even if it's just the logo and 2-3 of the characters. I'll try to see if I can get them another way. Thanks guys!

 

[jemuca]

Try this.

Thanks so much!! Its perfect!

 

[NBDESIGNZ]

Hello guys,

I'd need some help with some gradients on the number board attached, just can't make them work properly.

 

[krisduv]

Hello guys,

I'd need some help with some gradients on the number board attached, just can't make them work properly.

Try this

 

[Maninashed]

Hello guys,

I'd need some help with some gradients on the number board attached, just can't make them work properly.

Can't see what is causing the problem. Did you start with 100% opacity before adding the gradient? Anyway Here is a full one.

 

[krisduv]

Oups! I misunderstood the request.

 

[Need4Speed685]

Got these driver names to put on some updated KCMG Porsche liveries after the latest NLS round.

Thanks in advance if you get them done!