GT7 SVG request thread.

  • Thread starter daan
  • 5,553 comments
  • 407,288 views
Hi, can someone convert/create this logo, please?
swatrom.jpeg

It's from MCR's own line of ROMs for the Nissan GT-R. Thank you in advance.
 
Hi there good afternoon, may I get my vector image reduced to 15kb
I could only get to 19kb. I would suggest doing in separate parts as it would make laying on the car a lot neater, if more time consuming.
 

Attachments

  • image C (1).svg
    19.5 KB · Views: 13
I could only get to 19kb. I would suggest doing in separate parts as it would make laying on the car a lot neater, if more time consuming.
Thank you! I had it converted already, I had to separate it into three parts, definitely time-consuming, and at the end It livery turn out nice.
 
Thank you! I had it converted already, I had to separate it into three parts, definitely time-consuming, and at the end It livery turn out nice.
I had it down to 15.94 after svgomg by removing every extra node I could and was stuck there and was going to split it tonight, glad your sorted already. Please show the livery some time. Very curious about your design.
 
I had it down to 15.94 after svgomg by removing every extra node I could and was stuck there and was going to split it tonight, glad your sorted already. Please show the livery some time. Very curious about your design.
Oh dang Huff, i had a tough time too, you do not need to worry about it. For sure! do you where I can put my livery design in the forums for you to see it?
 
I had it down to 15.94 after svgomg by removing every extra node I could and was stuck there and was going to split it tonight, glad your sorted already. Please show the livery some time. Very curious about your design.
To get to 19kb I deleted all the wheels bar one, and then cloned the rest from the remaining wheel. Did you do the same? I also cloned any vehicle body that was the same. Didn't have the time to tweak any nodes on the vehicle bodies, so if you've not cloned then combining our approaches may get it to 15kb, but that said it sounds like he's sorted.
 
To get to 19kb I deleted all the wheels bar one, and then cloned the rest from the remaining wheel. Did you do the same? I also cloned any vehicle body that was the same. Didn't have the time to tweak any nodes on the vehicle bodies, so if you've not cloned then combining our approaches may get it to 15kb, but that said it sounds like he's sorted.
I took every wheel down to two nodes, and eliminated any body nodes that were not needed. That got me to around 16kb and then I was putting in better anchor points so I could get rid of inefficient ones. That was around the time I thought I should make two decals.
 
Can someone help me out with a simple, clean "W" in the style below? Doesn't need to be exact. Appreciate the help as always!
To clarify, just the "W", no background.
1673653787547.png
 
Last edited:
Sorry to ask again, but can anyone help me with a couple of drivers names please, both in full capitals?

J. MARDENBOROUGH

H. YASUDA

Thanks in advance!
 
Sorry to ask again, but can anyone help me with a couple of drivers names please, both in full capitals?

J. MARDENBOROUGH

H. YASUDA

Thanks in advance!
Any special font? Bold? Italic? I will be happy to do this.
Here they are in a basic font if it’s not important.
 

Attachments

  • J mardenborough.svg
    13 KB · Views: 11
  • H YASUDA .svg
    5.8 KB · Views: 10
Can someone help me out with a simple, clean "W" in the style below? Doesn't need to be exact. Appreciate the help as always!
To clarify, just the "W", no background.
View attachment 1222672
I made it exactly as it is in the reference, I can even it up if you need. I wasn’t sure of the intent, if it should stay “cartoonish” or be made cleaner. Let me know.
 

Attachments

  • Zigzag w.svg
    1.3 KB · Views: 10
I made it exactly as it is in the reference, I can even it up if you need. I wasn’t sure of the intent, if it should stay “cartoonish” or be made cleaner. Let me know.
That's perfect, thanks @huff! This is the last piece of the puzzle, so you'll see my intent pretty soon ;)
 
I've attached an SVG - is anyone able to separate the viking figure part from the Northlink Ferries text? If possible I'd love to have it split as two SVGs, one of the viking and one of the text (so I could have the viking pointing forwards on both sides of the cars' livery)
 

Attachments

  • footerlogo.svg
    27.8 KB · Views: 14
I've attached an SVG - is anyone able to separate the viking figure part from the Northlink Ferries text? If possible I'd love to have it split as two SVGs, one of the viking and one of the text (so I could have the viking pointing forwards on both sides of the cars' livery)
 

Attachments

  • Viking only 2.svg
    12.4 KB · Views: 14
  • Viking decal wordmark.svg
    9.9 KB · Views: 15
Can someone make SVGs of these following two text decals? Would be appreciated

"P01G":
View attachment 1223182View attachment 1223183

"Kunimitsu Spirit":

View attachment 1223184
They are already in decal database.
search for stanley and they will pop up ;) .




 
Last edited:
May I have this logo in 2 files, one of them states "Cambria" without the trademark and the other one is the picture.

Very much appreciated as always
 

Attachments

  • 448-4482007_cambria-usa-cambria-quartz-hd-png-download.jpg
    448-4482007_cambria-usa-cambria-quartz-hd-png-download.jpg
    20.7 KB · Views: 11
Last edited:
Hi all,

Been a while but I have 4 requests. Can someone pull it off?
 

Attachments

  • CubiScan.png
    CubiScan.png
    6 KB · Views: 7
  • Preston.png
    Preston.png
    14.5 KB · Views: 8
  • Salmo.png
    Salmo.png
    7.8 KB · Views: 8
  • Lews.jpeg
    Lews.jpeg
    31 KB · Views: 8
Back