GT7 SVG request thread.

  • Thread starter daan
  • 5,370 comments
  • 360,095 views
If someone could grab the Autech logo here, that would be great
(Found a better source pic)
206-261.jpg
 
Last edited:
Hi guys,
I have a couple of requests I’m hoping someone can help me out with.
Any help is greatly appreciated :) don’t need any background on the mushroom cloud also the dinosaur will be difficult so whatever is doable :)
Many thanks


76A33E43-CBEA-4D9E-9DCD-CE1E1C4209DE.jpeg
6B6234B5-480D-4443-8600-3E45D8ED23C4.jpeg
21A07E74-D1B8-43B6-90D6-F2813013A0A9.jpeg
FC77469A-81A5-4D16-B861-6CEF0825B028.jpeg
699233D6-5DE1-424A-8E52-AF2F33DB46BE.jpeg
B684B311-09A1-4648-9ED0-19D4398542E9.jpeg
74346A26-1978-4898-A112-D292E6530D24.png
 
Last edited:
Can anyone kindly make the Federal Tyres logo attached in three versions:

1. White and red as as attached but the blue changed to black.

2. Replace the red with white, black background as per 1.

3. All white version curved so it will roll over a wheel arch nicely?

Many thanks in advance. Sorry if it's a tricky one (the curved one mainly...)
 

Attachments

  • Federal-Tire-logo.png
    Federal-Tire-logo.png
    11.8 KB · Views: 15
Last edited:
Hi guys, me again. I only have the one, but I would like two variations of it.
One would be of the whole decal and the other would be of the word "SHERRIN"
If you could, could you do the writing (and the kangaroo) in black on a clear background?

download.png

Thank you for your help.
 
MidnightRun85
Can anyone kindly make the Federal Tyres logo attached in three versions:

1. White and red as as attached but the blue changed to black.

2. Replace the red with white, black background as per 1.

3. All white version curved so it will roll over a wheel arch nicely?

Many thanks in advance. Sorry if it's a tricky one (the curved one mainly...)
Click to expand...
One for you.


Ups.... didnt read everything. Point to krisduv :cheers:
 

Attachments

  • Federal-Tire-logo.svg
    10.4 KB · Views: 18
Last edited:
ScotteDawg
Hi guys, me again. I only have the one, but I would like two variations of it.
One would be of the whole decal and the other would be of the word "SHERRIN"
If you could, could you do the writing (and the kangaroo) in black on a clear background?

View attachment 1156331

Thank you for your help.
Click to expand...
And some for you.
 

Attachments

  • Sherrin.svg
    11.2 KB · Views: 12
  • Sherrin2.svg
    11.7 KB · Views: 13
  • Sherrin3.svg
    13.3 KB · Views: 12
MidnightRun85
Can anyone kindly make the Federal Tyres logo attached in three versions:

1. White and red as as attached but the blue changed to black.

2. Replace the red with white, black background as per 1.

3. All white version curved so it will roll over a wheel arch nicely?

Many thanks in advance. Sorry if it's a tricky one (the curved one mainly...)
Click to expand...
(tell me if I misunderstood the 3rd)
 

Attachments

  • federal tire2.svg
    9.6 KB · Views: 16
  • feredal tire3.svg
    10.6 KB · Views: 17
  • federal tire.svg
    9.6 KB · Views: 13
Would anyone be able to make the decals on the light cover as a single file, and reproduce the silver boot badge, at all?

Screenshot_20220601-234223_eBay.png
 

Attachments

  • Screenshot_20220601-234411_eBay.png
    Screenshot_20220601-234411_eBay.png
    150.6 KB · Views: 14
Yep, I'm back... While trying to make an Adelaide Crows AFL livery, I realized that I needed the follwing logo (I already have the full decal) with the words separated from the picture and the words separated from each other. I do need the picture of the crow as well, thanks!

AFCColourLogo_RGB.jpg

The second one is a simple one. Just the words WE FLY AS ONE are all I need.

download.png

Thanks much!
 
Hi guys, looking for some one to have a crack at this logo.

The full logo and then one of the middle text separate would be fantastic. I’ve given it a go myself but just can’t seem to get the file size down enough.

Edit

Never Mind, managed to do it myself.
 
Last edited:
I'm looking for the JP Performance logo on the rear fender (below KW suspensions)
Can't seem to find a PNG/JPEG file of the logo itself, so these are the best images I could find :confused:

If the quality turns out to be too low, I can move one using a different JP logo. Appreciate any help✌️

Photo source: VW Beetle Tuning - Prior Design x JP Performance Beetle Widebody Kit
 

Attachments

  • VW-Beetle-Tuning-Prior-Design-x-JP-Performance-Widebody-Kit-5-1920x1080.jpeg
    VW-Beetle-Tuning-Prior-Design-x-JP-Performance-Widebody-Kit-5-1920x1080.jpeg
    170 KB · Views: 17
  • VW-Beetle-Tuning-Prior-Design-x-JP-Performance-Widebody-Kit-2-1920x1080.jpeg
    VW-Beetle-Tuning-Prior-Design-x-JP-Performance-Widebody-Kit-2-1920x1080.jpeg
    147 KB · Views: 17
gaphiko
I'm looking for the JP Performance logo on the rear fender (below KW suspensions)
Can't seem to find a PNG/JPEG file of the logo itself, so these are the best images I could find :confused:

If the quality turns out to be too low, I can move one using a different JP logo. Appreciate any help✌️

Photo source: VW Beetle Tuning - Prior Design x JP Performance Beetle Widebody Kit
Click to expand...

Found this slightly better photo but can't read the text under the "p" so I hope it's good enough

D25D7393-F750-4743-BCB7-2371B1844C6F.jpeg
 

Attachments

  • jp performance.svg
    11.7 KB · Views: 12
gaphiko
I'm looking for the JP Performance logo on the rear fender (below KW suspensions)
Can't seem to find a PNG/JPEG file of the logo itself, so these are the best images I could find :confused:

If the quality turns out to be too low, I can move one using a different JP logo. Appreciate any help✌️

Photo source: VW Beetle Tuning - Prior Design x JP Performance Beetle Widebody Kit
Click to expand...
The JP itself is no problem, but can´t identify the circle around !?

Krisduv faster and i think even better ! :cheers:
 

Attachments

  • JP.svg
    1.7 KB · Views: 17
Last edited:
Thanks a lot guys!
krisduv
Found this slightly better photo but can't read the text under the "p" so I hope it's good enough
Click to expand...
I think the bottom text says "EST [year]" or something. But it's totally okay you didn't include it, would be too small to notice on the livery anyways :D

McDotter
Krisduv faster and i think even better ! :cheers:
Click to expand...
Yeah I have to agree with you on this one 😅 I really appreciate your effort though :cheers:
 
gaphiko
Thanks a lot guys!

I think the bottom text says "EST [year]" or something. But it's totally okay you didn't include it, would be too small to notice on the livery anyways :D


Yeah I have to agree with you on this one 😅 I really appreciate your effort though :cheers:
Click to expand...
With the missing part
 

Attachments

  • jp performance 2.svg
    8.2 KB · Views: 16
Could one of you svg wizards sort me out with these for a livery I’m working on please?

I would also like the one on the wing end plate too if possible (sorry this is the best pic of it I could find)
 

Attachments

  • 9CC2BD3B-6A8F-4D11-94E9-2A88FD04D977.jpeg
    9CC2BD3B-6A8F-4D11-94E9-2A88FD04D977.jpeg
    14.6 KB · Views: 15
  • 159D0901-5953-497F-850D-4E18E032D8F5.png
    159D0901-5953-497F-850D-4E18E032D8F5.png
    129.5 KB · Views: 16
  • 86832AAD-DA5D-4AEA-9F62-41AC76FAE8FB.jpeg
    86832AAD-DA5D-4AEA-9F62-41AC76FAE8FB.jpeg
    23.4 KB · Views: 15
Nerazzurri
Could one of you svg wizards sort me out with these for a livery I’m working on please?
Click to expand...
The full Koolhaas and racing one logos are in GTS, you can get them from there. The Koolhaas text you could easily make yourself with one of the tools linked in the SVG FAQ thread :)
 
Hello again Legends! Just watching some GridLife and and noticed a few things that might be cool.


*Just the "ASM" part if you could please
1654282834055.png

1654282934740.png

*Just the "GLTC" logo please if ya can
1654283002102.png


Thx a million ya Legends!
 

Latest Posts

Back