Logitech G Pro Racing Wheel

[EricTheActor]

@GlamFM Is the cable connected to the console and the console powered on? If so, do you have a photo of the back of the wheel showing the cable connected?

It should be noted to everyone that was a 2 minute response time reply from Rich!! 2!

 

[LOGI_Rich]

Yeah sorry, should have been 1. 😁

Edit: adding emoji to make it clear I was joking. It's luck of the draw - if I'm in my email and happen to see a comment notification coming in then I'll jump on it.

 

[EricTheActor]

Yeah sorry, should have been 1.

You’ve done nothing wrong sir, nothing! lol.

Rich I hope Logitech treats you like the true professional you are! You’re an asset that they can’t do without in this venture and others coming! Product support is major, you’ve helped a ton of people on here….with patience. Some of these people would drive me nuts with these oddball and easy questions.

To have someone who is the dna of the project, and is accessible is great. I think everyone will agree the presentations and interviews you did from the show in Germany were major for advertising, product owners, buyers, the lineup, you and the company overall! You speak and present in a very even keeled manner that resonates with gamers and everyone alike.

 

[GlamFM]

I will have my full impressions tomorrow.
Done 150 kilometres with the new wheel so far.
Quick question: I feel like the wheel is a bit too light on straights (when I make small corrections) compared to how heavy it is in corners. Which setting would affect that?

 

[tinyman392]

I will have my full impressions tomorrow.
Done 150 kilometres with the new wheel to far.
Quick question: I feel like the wheel is a bit too light on straights (when I make small corrections) compared to how heavy it is in corners. Which setting would affect that?

In game I think it’s sensitivity?

 

[LOGI_Rich]

The FFB Sensitivity is the setting to adjust for that in GT7. It changes the force curve around centre, with higher values making it a much steeper curve, resulting in much stronger forces felt at centre.

As you've no doubt seen in this thread though, be wary of setting high values for high downforce cars!

 

[tinyman392]

I will have my full impressions tomorrow.
Done 150 kilometres with the new wheel to far.
Quick question: I feel like the wheel is a bit too light on straights (when I make small corrections) compared to how heavy it is in corners. Which setting would affect that?

I should have asked before, but you already set the recommended settings for the game, right?

 

[Childe Roland]

@Childe Roland

Thanks mate for your suggestion.

I was dissasembling my rig because we are painting the house and while moving backwards I run into the cable making that stupid disaster.

I was scared because of that trapezoidal shape at the end of the base but based on your recomendation I saw plenty of options in my country with the same slim end as the yours have.

Next week I will try one of those cables and I hope it works

 

[GlamFM]

I should have asked before, but you already set the recommended settings for the game, right?

Yeah I’m using the ones I found on the Logitech page. Are they still up to date?

EDIT: ah, you linked to them. So I guess they are still good.

The only thing I do differently is setting the strength in GT7. The page recommends having the strength set to 10 at all times in the game and fine tune on the wheel, which in VR is a hassle.
Is there any benefit to doing it that way?

 

[NicoGmbh]

@Childe Roland

When you’re doing this kind fo job, that’s the kind of things that can happen.

I run a construction business 😅

I hope you can find a solution easily. 🤞

This cable worked well for me.

 

[tinyman392]

Yeah I’m using the ones I found on the Logitech page. Are they still up to date?

EDIT: ah, you linked to them. So I guess they are still good.

The only thing I do differently is setting the strength in GT7. The page recommends having the strength set to 10 at all times in the game and fine tune on the wheel, which in VR is a hassle.
Is there any benefit to doing it that way?

In VR if you pause the game mid race and go into settings you can adjust FFB in game from there. I wouldn’t change the FFB strength on the wheel, leave it max, but adjust it in game.

 

[NicoGmbh]

Hi guys,

I have a question for those who own an RS Hub PC, used on Playstation with GT7.

I would like to know if the pattern I made is correct:

• in black: native functions,
• in blue: Playstation matches,
• in green: the original GT7 mapping,
• in orange: buttons that cannot be assigned to others function,
• in red on the left: no function assignable at this time,
• in red on the right: maybe 2 assignable functions. (???)

From my memorys of the GT7 menu, there might be room for some additional functions:

• direct rear view
• high/low beams toogle
• DRS (Porsche 992 GT3 RS),
• KERS (i am not sure)
• Wiper (I think it’s automatic on GT7 in case of rain).

I thank in advance those who will look at this.

 

[NicoGmbh]

Yeah I’m using the ones I found on the Logitech page. Are they still up to date?

EDIT: ah, you linked to them. So I guess they are still good.

The only thing I do differently is setting the strength in GT7. The page recommends having the strength set to 10 at all times in the game and fine tune on the wheel, which in VR is a hassle.
Is there any benefit to doing it that way?

See the datasheet on page 160.

Like you, I’m starting with the G Pro.

In my opinion, OsawaJoe’s proposals are very good to start with.

 

[GlamFM]

See the datasheet on page 160.

Like you, I’m starting with the G Pro.

In my opinion, OsawaJoe’s proposals are very good to start with.

Ah! The thing he said about max force and how the game reads 10 on start up no matter what explains a weird phenomenon I had earlier. Thanks for the heads up.

 

[LOGI_Rich]

GT7 always sets the strength that’s set in its own options on startup.

 

[GlamFM]

GT7 always sets the strength that’s set in its own options on startup.

But it’s not reflected on the Oled screen on the base, right?
I think this is what had me confused.
I had the game set to 8 and the base to 4.5 which felt way too strong, but when I set the base to 4.4 it dropped dramatically and felt way too weak.

I actually dropped it from 8 to 4.4, right?

 

[Dragonwhisky]

But it’s not reflected on the Oled screen on the base, right?
I think this is what had me confused.
I had the game set to 8 and the base to 4.5 which felt way too strong, but when I set the base to 4.4 it dropped dramatically and felt way too weak.

I actually dropped it from 8 to 4.4, right?

Set the base to 11 and in game where comfortable.

 

[LOGI_Rich]

But it’s not reflected on the Oled screen on the base, right?
I think this is what had me confused.
I had the game set to 8 and the base to 4.5 which felt way too strong, but when I set the base to 4.4 it dropped dramatically and felt way too weak.

I actually dropped it from 8 to 4.4, right?

In GT7 the on-wheel strength acts as a gain control within the limit set by the in-game strength. So in your example above you effectively set the in-game to roughly 3.2 (8 divided by 11, multiplied by 4.4).

For GT7, leave the wheel at 11 and only adjust the in-game strength as needed.

 

[MetalPedal]

@LOGI_Rich & All, would appreciate any feedback on the following: I've now tried and tested any combination possible (usb hub, usb-c adapter for the original usb cable in PS5 Pro frontside, original usb cable direct into PS5 Pro backside as well as PS5 in rest mode, PS5 in rest mode without USB charging, PS5 shutdown) and for all these options the wheel base fan stays in quite mode indefinitely, even after the 15min. cooldown period. Only removing the USB cable from either the ps5 or the base or removing the power cable shuts the fan and the base really down.
Is that normal behaviour?

Edit: interesting, now it shut down but it took approx. 30-40 min

 

[MadDog18]

Hi guys,

I have a question for those who own an RS Hub PC, used on Playstation with GT7.

I would like to know if the pattern I made is correct:

• in black: native functions,
• in blue: Playstation matches,
• in green: the original GT7 mapping,
• in orange: buttons that cannot be assigned to others function,
• in red on the left: no function assignable at this time,
• in red on the right: maybe 2 assignable functions. (???)

View attachment 1422380

From my memorys of the GT7 menu, there might be room for some additional functions:

• direct rear view
• high/low beams toogle
• DRS (Porsche 992 GT3 RS),
• KERS (i am not sure)
• Wiper (I think it’s automatic on GT7 in case of rain).

I thank in advance those who will look at this.

Doesn't the right Push button (or both?!) also go "Page Up"?
At least thats what it does for me on the standard Pro GT D Wheel.

 

[NicoGmbh]

The RS Hub notice appears to indicate that the left rotary knob is not clickable.

And the GL key is not recognized by some titles.

I’m far from my hardware this week, and I can’t check the in-game settings.

I need to receive my new Momo wheels.

I ordered a sticker board that has just been released in the RS Hub format.

The diameters have been adapted to the HUB buttons because we have:

• 7 mm for the center of the stick,
• 10 mm for the majority of buttons,
• 14 mm for G1/PS/Xbox button.

Logitech RS Hub - buttons stickers

So I think about how I’m going to set all this.

 

[LOGI_Rich]

@MetalPedal yes, it's correct behaviour because the wheel is "host aware". If the host is keeping the wheel awake then there's nothing we can do - unplugging the USB cable is the simplest solution.