Logitech G Pro Racing Wheel

Yeah sorry, should have been 1.
You’ve done nothing wrong sir, nothing! lol.

Rich I hope Logitech treats you like the true professional you are! You’re an asset that they can’t do without in this venture and others coming! Product support is major, you’ve helped a ton of people on here….with patience. Some of these people would drive me nuts with these oddball and easy questions.

To have someone who is the dna of the project, and is accessible is great. I think everyone will agree the presentations and interviews you did from the show in Germany were major for advertising, product owners, buyers, the lineup, you and the company overall! You speak and present in a very even keeled manner that resonates with gamers and everyone alike.
 
I will have my full impressions tomorrow.
Done 150 kilometres with the new wheel so far.
Quick question: I feel like the wheel is a bit too light on straights (when I make small corrections) compared to how heavy it is in corners. Which setting would affect that?
 
Last edited:
I will have my full impressions tomorrow.
Done 150 kilometres with the new wheel to far.
Quick question: I feel like the wheel is a bit too light on straights (when I make small corrections) compared to how heavy it is in corners. Which setting would affect that?
In game I think it’s sensitivity?
 
The FFB Sensitivity is the setting to adjust for that in GT7. It changes the force curve around centre, with higher values making it a much steeper curve, resulting in much stronger forces felt at centre.

As you've no doubt seen in this thread though, be wary of setting high values for high downforce cars!
 
Thanks mate for your suggestion.

I was dissasembling my rig because we are painting the house and while moving backwards I run into the cable making that stupid disaster.

I was scared because of that trapezoidal shape at the end of the base but based on your recomendation I saw plenty of options in my country with the same slim end as the yours have.

Next week I will try one of those cables and I hope it works
 
Last edited:
I should have asked before, but you already set the recommended settings for the game, right?
Yeah I’m using the ones I found on the Logitech page. Are they still up to date?

EDIT: ah, you linked to them. So I guess they are still good.

The only thing I do differently is setting the strength in GT7. The page recommends having the strength set to 10 at all times in the game and fine tune on the wheel, which in VR is a hassle.
Is there any benefit to doing it that way?
 
Last edited:
Yeah I’m using the ones I found on the Logitech page. Are they still up to date?

EDIT: ah, you linked to them. So I guess they are still good.

The only thing I do differently is setting the strength in GT7. The page recommends having the strength set to 10 at all times in the game and fine tune on the wheel, which in VR is a hassle.
Is there any benefit to doing it that way?
In VR if you pause the game mid race and go into settings you can adjust FFB in game from there. I wouldn’t change the FFB strength on the wheel, leave it max, but adjust it in game.
 
Hi guys,

I have a question for those who own an RS Hub PC, used on Playstation with GT7.

I would like to know if the pattern I made is correct:
  • in black: native functions,
  • in blue: Playstation matches,
  • in green: the original GT7 mapping,
  • in orange: buttons that cannot be assigned to others function,
  • in red on the left: no function assignable at this time,
  • in red on the right: maybe 2 assignable functions. (???)

rs_wheel_hub_PS mapping scheme only.jpg


From my memorys of the GT7 menu, there might be room for some additional functions:
  • direct rear view
  • high/low beams toogle
  • DRS (Porsche 992 GT3 RS),
  • KERS (i am not sure)
  • Wiper (I think it’s automatic on GT7 in case of rain).

I thank in advance those who will look at this.
 
Yeah I’m using the ones I found on the Logitech page. Are they still up to date?

EDIT: ah, you linked to them. So I guess they are still good.

The only thing I do differently is setting the strength in GT7. The page recommends having the strength set to 10 at all times in the game and fine tune on the wheel, which in VR is a hassle.
Is there any benefit to doing it that way?
See the datasheet on page 160.

Like you, I’m starting with the G Pro.

In my opinion, OsawaJoe’s proposals are very good to start with.
 
See the datasheet on page 160.

Like you, I’m starting with the G Pro.

In my opinion, OsawaJoe’s proposals are very good to start with.
Ah! The thing he said about max force and how the game reads 10 on start up no matter what explains a weird phenomenon I had earlier. Thanks for the heads up.
 
GT7 always sets the strength that’s set in its own options on startup.
But it’s not reflected on the Oled screen on the base, right?
I think this is what had me confused.
I had the game set to 8 and the base to 4.5 which felt way too strong, but when I set the base to 4.4 it dropped dramatically and felt way too weak.

I actually dropped it from 8 to 4.4, right?
 
But it’s not reflected on the Oled screen on the base, right?
I think this is what had me confused.
I had the game set to 8 and the base to 4.5 which felt way too strong, but when I set the base to 4.4 it dropped dramatically and felt way too weak.

I actually dropped it from 8 to 4.4, right?
Set the base to 11 and in game where comfortable.
 
But it’s not reflected on the Oled screen on the base, right?
I think this is what had me confused.
I had the game set to 8 and the base to 4.5 which felt way too strong, but when I set the base to 4.4 it dropped dramatically and felt way too weak.

I actually dropped it from 8 to 4.4, right?
In GT7 the on-wheel strength acts as a gain control within the limit set by the in-game strength. So in your example above you effectively set the in-game to roughly 3.2 (8 divided by 11, multiplied by 4.4).

For GT7, leave the wheel at 11 and only adjust the in-game strength as needed.
 
@LOGI_Rich & All, would appreciate any feedback on the following: I've now tried and tested any combination possible (usb hub, usb-c adapter for the original usb cable in PS5 Pro frontside, original usb cable direct into PS5 Pro backside as well as PS5 in rest mode, PS5 in rest mode without USB charging, PS5 shutdown) and for all these options the wheel base fan stays in quite mode indefinitely, even after the 15min. cooldown period. Only removing the USB cable from either the ps5 or the base or removing the power cable shuts the fan and the base really down.
Is that normal behaviour?

Edit: interesting, now it shut down but it took approx. 30-40 min
 
Last edited:
Hi guys,

I have a question for those who own an RS Hub PC, used on Playstation with GT7.

I would like to know if the pattern I made is correct:
  • in black: native functions,
  • in blue: Playstation matches,
  • in green: the original GT7 mapping,
  • in orange: buttons that cannot be assigned to others function,
  • in red on the left: no function assignable at this time,
  • in red on the right: maybe 2 assignable functions. (???)

View attachment 1422380

From my memorys of the GT7 menu, there might be room for some additional functions:
  • direct rear view
  • high/low beams toogle
  • DRS (Porsche 992 GT3 RS),
  • KERS (i am not sure)
  • Wiper (I think it’s automatic on GT7 in case of rain).

I thank in advance those who will look at this.
Doesn't the right Push button (or both?!) also go "Page Up"?
At least thats what it does for me on the standard Pro GT D Wheel.
 
The RS Hub notice appears to indicate that the left rotary knob is not clickable.

And the GL key is not recognized by some titles.

I’m far from my hardware this week, and I can’t check the in-game settings.

I need to receive my new Momo wheels.

I ordered a sticker board that has just been released in the RS Hub format.

The diameters have been adapted to the HUB buttons because we have:

  • 7 mm for the center of the stick,
  • 10 mm for the majority of buttons,
  • 14 mm for G1/PS/Xbox button.

Logitech RS Hub - buttons stickers

So I think about how I’m going to set all this.
 
... For this reason, the pallets are at maximum and designed for 290 wheels, it’s sure...
I have a slightly different opinion.
I received my two wheels this morning.
I assembled them on my RS Hub with their OEM paddles settings, the largest cropping possible.
In the case of SIM GT 320, I reach the paddles easily, almost with the index second phalanx (for information, I wear gloves and I use a size M (8.5 EUR).
For most people, I think the OEM paddles will be perfectly ergonomic.

I could try it in a few days.
It is possible that I decrease the setting by moving the paddles closer to the center.
 
Last edited:
I have a slightly different opinion.
I received my two wheels this morning.
I assembled them on my RS Hub with their OEM paddles settings, the largest cropping possible.
In the case of SIM GT 320, I reach the paddles easily, almost with the index second phalanx (for information, I wear gloves and I use a size M (8.5 EUR).
For most people, I think the OEM paddles will be perfectly ergonomic.

I could try it in a few days.
It is possible that I decrease the setting by moving the paddles closer to the center.
Congrats on the wheels! No i think we agree overall. It’s no problem for most. I just like options and extra parts lol. I wear XXL(13) gloves. I just meant broader audience and options. My hands are fine with it, but I imagine if we had extended paddles it could be beneficial to many. I would try them if someone releases it. I’ve been using my 330 without incident for a few months.
 
And the GT-RACER 290

Oh it’s no big deal, I agree with you. I see what you’re saying but it’s even less of a problem for me. My fingers reach past the paddle. Just saying options are always fun. Some people may have smaller hands.
 

Attachments

  • IMG_3246.jpeg
    IMG_3246.jpeg
    146 KB · Views: 1
  • IMG_3248.jpeg
    IMG_3248.jpeg
    125.7 KB · Views: 1
  • IMG_3249.jpeg
    IMG_3249.jpeg
    128.9 KB · Views: 1
  • image.jpg
    image.jpg
    220.7 KB · Views: 1
Having a terrible experience with Logitech & UPS at the moment.
I ordered a G Racing Adapter on the 6th of January, it was in stock ready to ship. They took my money, then the order didn't progress from accepted.
On the 15th of January I contacted Logitech support, asking why it had not shipped. The case was escalated and the order was processed and shipped on a 2 to 3 day delivery, later that same day.
It was supposed to be delivered on Friday the 17th, then I had an email to say it had been delayed and would be delivered on Monday the 20th, no big deal as I had been waiting so long for it anyway.
On Saturday (The 18th) I had emails and text messages from UPS saying it was out for delivery that day, great I thought-happy days!
Saturday came and went and the tracking has not updated from out for delivery. Yesterday I spent a lot of time speaking to a lady from the local UPS depot who was doing her best to find my parcel, but unfortunately it has disappeared into thin air!
The lady from UPS said it was scanned for delivery but it was either stolen by the driver (agency drivers on weekends so couldn't find out who the driver was) or whoever scanned it at the depot has stolen it and it was never put on the van.
So today I had to raise another ticket with Logitech, who are going to look into it, but here's the thing, Logitech refuse to dispatch a replacement to me or refund me until UPS have finished their investigation and Logitech are satisfied that it has gone missing/been stolen.

So here I am, out of pocket and with no adapter, helplessly waiting.

Absolute bag of s**t 🤬🤬🤬
 

Latest Posts

Back