Logitech G Pro Racing Wheel

[Pzynen]

Oh it’s no big deal, I agree with you. I see what you’re saying but it’s even less of a problem for me. My fingers reach past the paddle. Just saying options are always fun. Some people may have smaller hands.

How are the wheels in general? Do they feel different FFB wise?

Mine are coming friday😃

 

[MetalPedal]

well it's not the greatest thing in the world but it's ok for the price 😆 not going to put it on the momo wheel for sure

 

[Shah1]

We recommend not using the large foam piece when in a rig, as you've got a lot more leverage. Swap that for the yellow elastomer for the closest equivalent.

@LOGI_Rich, what brake force on the base would you recommend now that I've swapped out the elastomer?

 

[LOGI_Rich]

Impossible to say because it's entirely down to your preference and strength. Personally, I often to set it at a level where it's not that easy to achieve 100% brake output, as this helps prevent brake lockup in cars without ABS, but of course you need to balance this over long term comfort etc.

 

[notarjy]

@LOGI_Rich, what brake force on the base would you recommend now that I've swapped out the elastomer?

try 35-45 I find that range works well across everything I play. try and take note how the brake pedal readout on the wheel translates to brake pedal travel in each sim, I find not all sims read it 1:1

 

[Shah1]

try 35-45 I find that range works well across everything I play. try and take note how the brake pedal readout on the wheel translates to brake pedal travel in each sim, I find not all sims read it 1:1

Yeah I've currently got it set to 35, pressing the pedal it's not easy to achieve 100% braking.

 

[Oshawa-Joe]

 

[Dragonwhisky]

Yeah I've currently got it set to 35, pressing the pedal it's not easy to achieve 100% braking.

Don't forget to calibrate the pedal travel in game. Do that each time you change the brake force value at the wheel.

 

[GlamFM]

Interesting. Breaking is definitely the biggest thing to get used to now that I've switched to the G Pro.

I immediately switched out the elastomers for the softest ones and set the max break to 75% in GT, but that was probably nonsense.

 

[NicoGmbh]

Here, the hardest composition (small, red, brown) and braking force at 35.
At first a little confusing, then more and more natural.

 

[LOGI_Rich]

Yep, Will says it far more eloquently, but basically what I said. It's all personal and based on you and your setup. For me at a desk, 30-35 is probably about right, but in a rig I would max that so easily. For a rig I'm usually at around 50-60.