- 5,511
- Druids Bend
- Z4E_Midnight85
Midnight85's liveries
- Thread starter MidnightRun85
- 154 comments
- 24,271 views
- 5,511
- Druids Bend
- Z4E_Midnight85
Amazon Prime Lexus Team
Inspired by the Amazon Prime delivery vans seen everywhere around the UK at the moment (and probably everywhere else too), this is the Prime RC F trio set up to take on the FIA manufacturers championship with a GTWC / GT4 European Series theme.
Amazon Prime Lexus RC F GT4
Amazon Prime teams up with Lexus to enter the GT4 European Series with the Lexus RC F GT4. A simple livery drawing from the commonly seen Prime delivery vans, using the same colour scheme, with Michelin tyre decals to make the livery more appropriate for FIA competition. The base colour is pearlescent and the decals are all semi-gloss to provide textural contrast on the surfaces and make the sponsor decals stand out more.
DOWNLOAD
Amazon Prime Lexus RC F GT3
The Amazon Prime Lexus team includes two GT3 cars, one using the 2016 Prototype platform, one using the 2017 platform. Both of these are entered into the 2021 Fanatec GT World Series, albeit running Michelin tyres (convenient for the FIA series...) and keep the same graphic layout and colour scheme as the GT4 car, with subtle detail changes between the two cars appropriate to the subtle differences in their bodywork. Both cars are riding on Work alloys finished in half matte black. The sponsor choices give a blend of Japanese manufacturers with European manufacturers, reflecting the nature of the Japanese car entry into a European series dominated by European cars. Borla and Garrett provide the exhaust and turbo systems for the best power and sound combination available. Both cars run the same numbers as the original base cars from Emil Frey Racing (#54 on the Prototype, #58 on the '17 car) in the original positions, so are fully Sport Mode compatible.
DOWNLOAD #54 (Prototype)
DOWNLOAD #58 (GT3 '17)
Inspired by the Amazon Prime delivery vans seen everywhere around the UK at the moment (and probably everywhere else too), this is the Prime RC F trio set up to take on the FIA manufacturers championship with a GTWC / GT4 European Series theme.
Amazon Prime Lexus RC F GT4
Amazon Prime teams up with Lexus to enter the GT4 European Series with the Lexus RC F GT4. A simple livery drawing from the commonly seen Prime delivery vans, using the same colour scheme, with Michelin tyre decals to make the livery more appropriate for FIA competition. The base colour is pearlescent and the decals are all semi-gloss to provide textural contrast on the surfaces and make the sponsor decals stand out more.
DOWNLOAD
Amazon Prime Lexus RC F GT3
The Amazon Prime Lexus team includes two GT3 cars, one using the 2016 Prototype platform, one using the 2017 platform. Both of these are entered into the 2021 Fanatec GT World Series, albeit running Michelin tyres (convenient for the FIA series...) and keep the same graphic layout and colour scheme as the GT4 car, with subtle detail changes between the two cars appropriate to the subtle differences in their bodywork. Both cars are riding on Work alloys finished in half matte black. The sponsor choices give a blend of Japanese manufacturers with European manufacturers, reflecting the nature of the Japanese car entry into a European series dominated by European cars. Borla and Garrett provide the exhaust and turbo systems for the best power and sound combination available. Both cars run the same numbers as the original base cars from Emil Frey Racing (#54 on the Prototype, #58 on the '17 car) in the original positions, so are fully Sport Mode compatible.
DOWNLOAD #54 (Prototype)
DOWNLOAD #58 (GT3 '17)
- 5,511
- Druids Bend
- Z4E_Midnight85
Gulf Ford GT LM Spec II
An addition to the Gulf Speed Team, in the form of the Ford GT LM Spec II, dressed in the same livery as the Aston Martin I did a couple of weeks ago, ready for high speed circuits like Monza.The livery uses the same colour gradient style as the rest of the team, and the same general sponsors (Tag Heuer, Castrol Edge, Fanatec, Pagid and Bilstein), but also carries some more appropriate American and Ford sponsors (American Racing Wheels, Goodyear Tires, Ford EcorBoost).
This one isn't fully Sport Mode friendly, but still looks rather sexy on track even with the overlap on the race number/EcoBoost text.
DOWNLOAD
To be joined by the ultimate speed chaser soon...
An addition to the Gulf Speed Team, in the form of the Ford GT LM Spec II, dressed in the same livery as the Aston Martin I did a couple of weeks ago, ready for high speed circuits like Monza.The livery uses the same colour gradient style as the rest of the team, and the same general sponsors (Tag Heuer, Castrol Edge, Fanatec, Pagid and Bilstein), but also carries some more appropriate American and Ford sponsors (American Racing Wheels, Goodyear Tires, Ford EcorBoost).
This one isn't fully Sport Mode friendly, but still looks rather sexy on track even with the overlap on the race number/EcoBoost text.
DOWNLOAD
To be joined by the ultimate speed chaser soon...
Last edited:
- 5,511
- Druids Bend
- Z4E_Midnight85
Gulf McLaren F1 GTR
Completing the collection for the Gulf Speed Team is the iconic McLaren F1, in GTR format for GT3 racing. Wearing the colour gradient livery common among the Gulf Speed Team cars, the McLaren pulls in sponsors from the current F1 team (Arrow, Splunk), mixed with sponsors from the original McLaren F1 program (Michelin) and from the other cars in the trio (Tag Heuer, Castrol Edge, Fanatec, Pagid, Bilstein).
Unlike the other liveries, this one is fully Sport Mode friendly, so it's perfect for daily races at flat out circuits like Monza, Tokyo and SSRX.
DOWNLOAD
Completing the collection for the Gulf Speed Team is the iconic McLaren F1, in GTR format for GT3 racing. Wearing the colour gradient livery common among the Gulf Speed Team cars, the McLaren pulls in sponsors from the current F1 team (Arrow, Splunk), mixed with sponsors from the original McLaren F1 program (Michelin) and from the other cars in the trio (Tag Heuer, Castrol Edge, Fanatec, Pagid, Bilstein).
Unlike the other liveries, this one is fully Sport Mode friendly, so it's perfect for daily races at flat out circuits like Monza, Tokyo and SSRX.
DOWNLOAD
- 5,511
- Druids Bend
- Z4E_Midnight85
Z4Events RADBUL Roadster Touring Car
A while back we had a wildcard race in the Roadster Touring Car, and I decided to adorn mine with the RADBUL livery of Mad Mike, modified to suit our race league and personalised with my gamertag, common brands, etc. I ended up missing the race, but decided to finish the livery and share it anyway, as it's one of my favourite liveries I've worked on. I love the way the red chrome pops from behind the glossy decals, and the overall livery layout just works so well on the MX-5 body shape.
DOWNLOAD
A while back we had a wildcard race in the Roadster Touring Car, and I decided to adorn mine with the RADBUL livery of Mad Mike, modified to suit our race league and personalised with my gamertag, common brands, etc. I ended up missing the race, but decided to finish the livery and share it anyway, as it's one of my favourite liveries I've worked on. I love the way the red chrome pops from behind the glossy decals, and the overall livery layout just works so well on the MX-5 body shape.
DOWNLOAD
- 5,511
- Druids Bend
- Z4E_Midnight85
Mazda RT24-P Roadster Touring Car
Inspired by an idea seen on Instagram by @artsbybildraw for a GT300 Mazda MX-5 wearing a livery from the IMSA prototype Mazda RT24-P. Simple and powerful, and that Soul Red just looks perfect on the Roadster's bodywork.
DOWNLOAD
The 3D work by Billy Taymiya (@artsbybildraw):
Inspired by an idea seen on Instagram by @artsbybildraw for a GT300 Mazda MX-5 wearing a livery from the IMSA prototype Mazda RT24-P. Simple and powerful, and that Soul Red just looks perfect on the Roadster's bodywork.
DOWNLOAD
The 3D work by Billy Taymiya (@artsbybildraw):
Last edited:
- 5,511
- Druids Bend
- Z4E_Midnight85
Mazda BTCC Roadster Touring Car
My take on the classic "rolly polly Mazda", the Xedos driven by Matt Neal in the 1993 BTCC, widely considered to be the ugliest car to ever race in the British racing series, and one which suffered a spectacular crash (pic at the bottom of this post).
This livery takes the basic elements of the original and puts a modern spin on them where possible, bringing it in line with today's competition while having a retro-throwback feel about it. Kwik Fit decals, Goodyear tyres have replaced the Yokohama's the original wore, and OZ Racing wheels were the closest match to the original 100+ Alloys it had. All sponsor decals are current versions, aside from Team Dynamics which is actually now non-existent - but included as a nod to the sponsor of the original car.
DOWNLOAD
The original car in the 1993 BTCC, and it's fateful end:
My take on the classic "rolly polly Mazda", the Xedos driven by Matt Neal in the 1993 BTCC, widely considered to be the ugliest car to ever race in the British racing series, and one which suffered a spectacular crash (pic at the bottom of this post).
This livery takes the basic elements of the original and puts a modern spin on them where possible, bringing it in line with today's competition while having a retro-throwback feel about it. Kwik Fit decals, Goodyear tyres have replaced the Yokohama's the original wore, and OZ Racing wheels were the closest match to the original 100+ Alloys it had. All sponsor decals are current versions, aside from Team Dynamics which is actually now non-existent - but included as a nod to the sponsor of the original car.
DOWNLOAD
The original car in the 1993 BTCC, and it's fateful end:
Last edited:
- 5,511
- Druids Bend
- Z4E_Midnight85
BF Goodrich MINI Clubman VGT
I've always had a soft spot for MINI, and their VGT is one of my favourite VGT cars to drive - it drives like a real car on steroids, not like a spaceship like the SRT and Chaparral for example. That classic MINI shape, modernised features, and hardcore road/race elements make this thing a must-have in my garage, and I'm happy PD decided to make it good to drive!
For this livery, I came across a concept render by Hugo Silva (who also provided the inspiration for the Hipermax Evo Gr.3), which used the original MINI, but the VGT wears it so much better than the original '65 car. A simple contrast of matte black base and glossy luminous yellow decals, with Monte Carlo Rally decals as a nostalgic point of interest. It's a shame the wheels couldn't be changed to some OZ Racing ones, but overall this livery makes a bold statement and stands out on track!
DOWNLOAD
The original artwork by Hugo Silva Designs:
I've always had a soft spot for MINI, and their VGT is one of my favourite VGT cars to drive - it drives like a real car on steroids, not like a spaceship like the SRT and Chaparral for example. That classic MINI shape, modernised features, and hardcore road/race elements make this thing a must-have in my garage, and I'm happy PD decided to make it good to drive!
For this livery, I came across a concept render by Hugo Silva (who also provided the inspiration for the Hipermax Evo Gr.3), which used the original MINI, but the VGT wears it so much better than the original '65 car. A simple contrast of matte black base and glossy luminous yellow decals, with Monte Carlo Rally decals as a nostalgic point of interest. It's a shame the wheels couldn't be changed to some OZ Racing ones, but overall this livery makes a bold statement and stands out on track!
DOWNLOAD
The original artwork by Hugo Silva Designs:
- 5,511
- Druids Bend
- Z4E_Midnight85
Mazda RT24-P LM55 VGT Gr.1
After making the Roadster TC derived from the RT24-P and a concept by @artsbybildraw, it made perfect sense to do the LM55 VGT in the same style, taking the livery that little bit closer to the original IMSA prototype livery. Wearing all the same sponsors as the original car, with race numbers set up to give the impression of a VGT class in IMSA - and Sport Mode ready. This car simply could not run any other number than 55, could it? And Soul Red just looks so good covering the curvaceous body panels of the LM55!
DOWNLOAD
After making the Roadster TC derived from the RT24-P and a concept by @artsbybildraw, it made perfect sense to do the LM55 VGT in the same style, taking the livery that little bit closer to the original IMSA prototype livery. Wearing all the same sponsors as the original car, with race numbers set up to give the impression of a VGT class in IMSA - and Sport Mode ready. This car simply could not run any other number than 55, could it? And Soul Red just looks so good covering the curvaceous body panels of the LM55!
DOWNLOAD
Last edited:
- 5,511
- Druids Bend
- Z4E_Midnight85
- 5,511
- Druids Bend
- Z4E_Midnight85
Ralliart Evo Gr.B Rally Car
A simple combination of the Ralliart colours in a corner patch layout, over the top of a satin carbon fibre base, with WRC Rallycross influences, all make the Ralliart Evo Gr.B Rally Car a fierce-looking rally weapon. An original livery wearing Michelin rubber and Sport Mode compatible, with some GT5/6 rally nostalgia on the side rear windows.
DOWNLOAD
A simple combination of the Ralliart colours in a corner patch layout, over the top of a satin carbon fibre base, with WRC Rallycross influences, all make the Ralliart Evo Gr.B Rally Car a fierce-looking rally weapon. An original livery wearing Michelin rubber and Sport Mode compatible, with some GT5/6 rally nostalgia on the side rear windows.
DOWNLOAD
- 5,511
- Druids Bend
- Z4E_Midnight85
- 5,511
- Druids Bend
- Z4E_Midnight85
Leyton House Genesis Gr.B Rally Car
Another rally car recreation of a classic F1 livery, this time the Leyton House livery. Closely linked to the Leyton House Hyundai Gr.1, Gr.3 and Gr.4 cars I did a while back, with all the same sponsors and details, but tweaked to suit a WRC campaign (without Pirelli tyres) and with a couple of extra sponsors. It's Sport Mode compatible, and the WRC Rally Sardegna decals make it the perfect choice for any races at Sardegna - Windmills!
DOWNLOAD
Another rally car recreation of a classic F1 livery, this time the Leyton House livery. Closely linked to the Leyton House Hyundai Gr.1, Gr.3 and Gr.4 cars I did a while back, with all the same sponsors and details, but tweaked to suit a WRC campaign (without Pirelli tyres) and with a couple of extra sponsors. It's Sport Mode compatible, and the WRC Rally Sardegna decals make it the perfect choice for any races at Sardegna - Windmills!
DOWNLOAD
Last edited:
- 5,511
- Druids Bend
- Z4E_Midnight85
Texaco Mustang Gr.B Rallycross Car
Based on the Texaco Focus Gr.B Rallycross Car I did a while back, here's the big bad brother, the Mustang. I had to move a few elements around to make them work on the very different body shape, but its mostly true to my original retro-revamp of the 1987 Texaco Sierra Cosworth driven by James Hardie, re-imagined for a BTCC Rallycross spin-off series.
DOWNLOAD
Based on the Texaco Focus Gr.B Rallycross Car I did a while back, here's the big bad brother, the Mustang. I had to move a few elements around to make them work on the very different body shape, but its mostly true to my original retro-revamp of the 1987 Texaco Sierra Cosworth driven by James Hardie, re-imagined for a BTCC Rallycross spin-off series.
DOWNLOAD
- 5,511
- Druids Bend
- Z4E_Midnight85
GReddy Trust Supra GT4
A re-creation of the 811 Design for an up-coming GReddy Trust Supra soon to show up at the European GT4 Series. We don't get to have satin metallic decals, so this was the best I could do under the circumstances!
Thank you to the decal creators for your work too!
DOWNLOAD
A re-creation of the 811 Design for an up-coming GReddy Trust Supra soon to show up at the European GT4 Series. We don't get to have satin metallic decals, so this was the best I could do under the circumstances!
Thank you to the decal creators for your work too!
DOWNLOAD
- 5,511
- Druids Bend
- Z4E_Midnight85
- 5,511
- Druids Bend
- Z4E_Midnight85
- 5,511
- Druids Bend
- Z4E_Midnight85
- 5,511
- Druids Bend
- Z4E_Midnight85
TAG Heuer Porsche 911 GT3 RS
Back with another 911 GT3 RS livery, again from a concept originally by 811 Design, but this time from a Taycan promo car. The glossy orange pops against the matte black nicely, and the light grey gives another element of colour contrast to add to the combo.
DOWNLOAD
Back with another 911 GT3 RS livery, again from a concept originally by 811 Design, but this time from a Taycan promo car. The glossy orange pops against the matte black nicely, and the light grey gives another element of colour contrast to add to the combo.
DOWNLOAD
Last edited:
- 5,511
- Druids Bend
- Z4E_Midnight85
- 5,511
- Druids Bend
- Z4E_Midnight85
Mobil 1 Porsche 911 GT3 RS
My interpretation of another concept by 811 Design, for a Mobil 1 branded Taycan. The front and rear of these two cars are so different I had to modify the layout and work with the 911's body features to create something that works.
Sport mode safe and ready for action!
DOWNLOAD
My interpretation of another concept by 811 Design, for a Mobil 1 branded Taycan. The front and rear of these two cars are so different I had to modify the layout and work with the 911's body features to create something that works.
Sport mode safe and ready for action!
DOWNLOAD
- 5,511
- Druids Bend
- Z4E_Midnight85
Zakspeed Jever Porsche 911 GT3 RS
A modernised street car replica of the 1998 Porsche 911 GT1 (98-004) used by Zakspeed in the 1998 FIA GT Championship, piloted by Michael Bartels and Armin Hahne. The championship regulations were unkind to the 911 GT1 and they returned the car at the end of the season, with 3td being their best finish.
I've kept the livery as close to the original as possible, while using the updated logos for each of the sponsors, and making my own interpretation of the rear end (as the 911 GT1 is so different at the tail). It's also annoying we can't paint the centres of the BBS LM wheels separately, because the original has gold centres but they looked wrong all gold.
DOWNLOAD
A modernised street car replica of the 1998 Porsche 911 GT1 (98-004) used by Zakspeed in the 1998 FIA GT Championship, piloted by Michael Bartels and Armin Hahne. The championship regulations were unkind to the 911 GT1 and they returned the car at the end of the season, with 3td being their best finish.
I've kept the livery as close to the original as possible, while using the updated logos for each of the sponsors, and making my own interpretation of the rear end (as the 911 GT1 is so different at the tail). It's also annoying we can't paint the centres of the BBS LM wheels separately, because the original has gold centres but they looked wrong all gold.
DOWNLOAD
Last edited:
- 5,511
- Druids Bend
- Z4E_Midnight85
Dyson Audi R8 LMS
Originally inspired by a concept by 811 Design (the pink PRO car) but then expanded to include a green PRO-AM and a blue AM entry to the Fanatec GTWS.
Built using semi-gloss decals over aluminum metallic base paint layers. The tiger stripes were a particularly tricky part of the livery, getting them all to line up the way I wanted to and looking good where they didn't line up.
All three are daily race ready and look classy on the race track!
DOWNLOAD #3 AM
DOWNLOAD #5 PRO-AM
DOWNLOAD #7 PRO
Originally inspired by a concept by 811 Design (the pink PRO car) but then expanded to include a green PRO-AM and a blue AM entry to the Fanatec GTWS.
Built using semi-gloss decals over aluminum metallic base paint layers. The tiger stripes were a particularly tricky part of the livery, getting them all to line up the way I wanted to and looking good where they didn't line up.
All three are daily race ready and look classy on the race track!
DOWNLOAD #3 AM
DOWNLOAD #5 PRO-AM
DOWNLOAD #7 PRO
Last edited:
- 5,511
- Druids Bend
- Z4E_Midnight85
Mazda Renown RX-VISION GT3 (Monochrome Edition)
Inspired by a recent concept by Sean Bull for a monochrome Renown F1 test car, this is my reinterpretation of the classic Renown 787B livery for the RX-VISION. Built on a matte black base layer, with semi-gloss carbon replacing the green and gloss charcoal replacing the orange in the original livery. This one is all about the detail.
Designed to be sport mode friendly (the Renown logo on the bonnet gets obscured a little).
DOWNLOAD
Inspired by a recent concept by Sean Bull for a monochrome Renown F1 test car, this is my reinterpretation of the classic Renown 787B livery for the RX-VISION. Built on a matte black base layer, with semi-gloss carbon replacing the green and gloss charcoal replacing the orange in the original livery. This one is all about the detail.
Designed to be sport mode friendly (the Renown logo on the bonnet gets obscured a little).
DOWNLOAD
- 5,511
- Druids Bend
- Z4E_Midnight85
- 5,511
- Druids Bend
- Z4E_Midnight85
Tomica Monster Sport GT-R Gr.4
A remake of the Tomica Skyline Silhouette, modernised, and revamped, with Monster Tajima at the wheel and the backing of HKS. Daily Race friendly and ready for Gr.4 action.
I also tried playing with the photo filters to make a batch of alike images, and I'm pretty happy with how these turned out, especially the third image. They are all night shots with the Papier preset applied, then settings adjusted to get the desired final effect.
DOWNLOAD
A remake of the Tomica Skyline Silhouette, modernised, and revamped, with Monster Tajima at the wheel and the backing of HKS. Daily Race friendly and ready for Gr.4 action.
I also tried playing with the photo filters to make a batch of alike images, and I'm pretty happy with how these turned out, especially the third image. They are all night shots with the Papier preset applied, then settings adjusted to get the desired final effect.
DOWNLOAD
- 5,511
- Druids Bend
- Z4E_Midnight85
- 5,511
- Druids Bend
- Z4E_Midnight85
Martini Mini Cooper S '65
A slightly modified replica of a real track-day Mini Cooper S with Martini-inspired livery. The original car has the number 72, but I've changed that to my race number.
Thanks to @DJShadesUK for hooking me up with the Walter and FIA Historic Racing decals - much appreciated!
DOWNLOAD
A slightly modified replica of a real track-day Mini Cooper S with Martini-inspired livery. The original car has the number 72, but I've changed that to my race number.
Thanks to @DJShadesUK for hooking me up with the Walter and FIA Historic Racing decals - much appreciated!
DOWNLOAD
- 5,511
- Druids Bend
- Z4E_Midnight85
Falken Tire WRX Time Attack
A spin-off of my previous Falken WRX Gr.3 - an adaptation of an 811 Design concept - this time sculpted onto the body of the WRX STI Isle of Man Time Attack Car. Where the Gr.3 car was intended to be an hardcore race car in the IMSA series, this was envisaged as a competitor in a fictitious IMSA Time Attack spin-off series, where the teams use a street car stripped back for time attack competition with much looser rules on power and handling components and specs. The livery comprises a colour fade gradient in Falken colours, an abstract pattern overlay, IMSA sponsors scattered around the place, and Subaru-regulars Whiteline and Cusco. The colour scheme works well with the pops of red which match the red in the Falken decals, and sat alongside the Gr.3 car these make a formidable pair.
A friend asked me to make a pair of liveries for this car, so I made a #22 and #53 which they used in an online lobby race. I decided to make a more generic public version, and the #228 seemed a fitting way to give a nod to the legendary 22B street car.
DOWNLOAD
The Gr.3 car can be found here.
A spin-off of my previous Falken WRX Gr.3 - an adaptation of an 811 Design concept - this time sculpted onto the body of the WRX STI Isle of Man Time Attack Car. Where the Gr.3 car was intended to be an hardcore race car in the IMSA series, this was envisaged as a competitor in a fictitious IMSA Time Attack spin-off series, where the teams use a street car stripped back for time attack competition with much looser rules on power and handling components and specs. The livery comprises a colour fade gradient in Falken colours, an abstract pattern overlay, IMSA sponsors scattered around the place, and Subaru-regulars Whiteline and Cusco. The colour scheme works well with the pops of red which match the red in the Falken decals, and sat alongside the Gr.3 car these make a formidable pair.
A friend asked me to make a pair of liveries for this car, so I made a #22 and #53 which they used in an online lobby race. I decided to make a more generic public version, and the #228 seemed a fitting way to give a nod to the legendary 22B street car.
DOWNLOAD
The Gr.3 car can be found here.
Last edited:
- 5,511
- Druids Bend
- Z4E_Midnight85
Pennzoil GT-R GT3 - Clean/Grunge.
A pair of Pennzoil GT-Rs, both based of the classic Pennzoil R34 GT-R GT500 of JGTC fame. Clean version and Grunge version.
DOWNLOAD (Clean)
DOWNLOAD (Grunge)
A pair of Pennzoil GT-Rs, both based of the classic Pennzoil R34 GT-R GT500 of JGTC fame. Clean version and Grunge version.
DOWNLOAD (Clean)
DOWNLOAD (Grunge)
Last edited:
