- 3,383
- Milky Way, Earth
- danbojte
https://www.gtplanet.net/forum/thre...s-for-garage-organizing-and-filtering.316737/What the name of the thread? There's just so many .
You can find there some other proposals from me. 👍
https://www.gtplanet.net/forum/thre...s-for-garage-organizing-and-filtering.316737/What the name of the thread? There's just so many .
@Ridox2JZGTE Your Countach JGTC replica has ABS on, right? Is because from 1999, JAF has restricted the use of ABS and the JGTC/Super GT cars built in 1999 and after have all assists off. They have no ABS, no TCS and neither no ASM.
Special Build of FEED Fujita Engineering Mazda RX7 FD3S 500PP
2011 Tsukuba Superlap Battle Champion Street S-Class
Comfort Soft to Sports Soft
Tuned to replicate Mazda RX-8 Laguna Seca Time Attack Best Motoring
Motoharu Kurosawa "Gan-San" Lap Record
RX Show
Tyres: Sports Hard
PP: 500
Cockpit view, No Aids, No ABS
Tyres: Comfort Medium
PP: 424
Cockpit view, No Aids, No ABS
They managed to catch and win the last races in A-Spec Seasonal at SPA,
respectively Tsukuba East Course.
I can't wait for the NOMAD Lamborghini GT1 tunes. That's one car I don't drive nearly enough, but I just haven't been able to find a setup I like.
And the RX-8, no?Hail RX7
And the RX-8, no?
RX8 is too overpowered in GT6
Edit: How is it overpowered? It is Ridox-powered at 247 HP.
Post updated.OP in general when PP is counted as evidenced in this FITT blind tuning result :
https://www.gtplanet.net/forum/thre...owtie-muscle-otaliema-tuners-revealed.322659/
Whahahaha! Don't know why I found that so funny. Just wish I had access to better smilies
Because you have the sense of humor. 👍Don't know why I found that so funny.
Another victory for Nicks Forza Dino 👍 Nice one @danbojte Not strictly a Hot Hatch though, you should be ashamed of yourself Using those poorly constructed loop holes to gain an advantage over all those poor rabbits stuck in FF hellExpert Level European Hot Hatch Race Winner
- Circuito de Madrid Reverse, 5 Laps
- Normal cars, 450PP max, Comfort/Soft compounds or less
View attachment 329374
No Aids, No ABS, G27, BB: 4/6
Great Challenge!
There are some non FF BMWs and AUDIs also. It's not an easy challenge at all. You'll like it. Thank you. 👍you should be ashamed of yourself Using those poorly constructed loop holes to gain an advantage over all those poor rabbits stuck in FF hell
Expert Level European Hot Hatch Race Winner
- Circuito de Madrid Reverse, 5 Laps
- Normal cars, 450PP max, Comfort/Soft compounds or less
View attachment 329374
No Aids, No ABS, G27, BB: 4/6
Great Challenge!
Another victory for Nicks Forza Dino 👍 Nice one @danbojte Not strictly a Hot Hatch though, you should be ashamed of yourself Using those poorly constructed loop holes to gain an advantage over all those poor rabbits stuck in FF hell
Only kidding I may just have to copy you on this one. Any chance to get back behind that wheel is always welcomed. It's such a great car, made better by the hands ( and feet ) of the master.
Just try it yourself. You'll be surprised, here and there, by the AI behavior in this challenge.Don't think those FF hatches will pose any threat, unless they start to get angry and bump you from the side and rear.
Yeah, I know . I saw an MR Renault thrown in there too when I was at a friends last night. Oh, and you are most welcomeThere are some non FF BMWs and AUDIs also. It's not an easy challenge at all. You'll like it. Thank you. 👍
I certainly shall. After I've tried it as is first. (Always good to get a comparison 👍 ) I'm sure it'll bring big smiles either wayMay I suggest to lower front ARB to 4, so it will have 4/5 ARB. I have found on 1.16 physics update, the ARB now works much more responsive than before to manage side weight transfer.
When I get on my console I'm going to be buying another Ferrari Dino. I'll be keeping my first Dino setup as the Nicks Forza Replica, of course, but I also want to try something different with the car. I'll be using the Nicks Forza suspension and stuff, but I'll be changing the power. I know that increasing the power substantially might necessitate suspension and/or LSD changes, but i'll cross that road when I come to it.
Oh, do any of you guys know of a good Replica tune for the Mazda Èfini RX-7 Type R (FD) (1991)? Unfortunately, my main man Ridox doesn't have anything and I've wanted a 90's era RX-7 (premium not standard) so I just bought one late last night. It drives terribly straight from the dealership... Ugh, it needs a good tune but I don't want to apply a typical tune from the more famous tuners here on GT6. Their tunes tend to be awesome from the sense that the cars drive remarkably easy and still very fast, but they lose the basic soul of the car(s) most of the time. I'm sure you guys feel the same way which is why you hang out in this Replica garage. So, anyone have a tune they're willing to share? Even if you made it yourself, I'd love to try it!
Masaki ( SPEED FACTORY RGO ) Mazda FD3S Efini RX7 Type R '91 450PS
( NO FLAT FLOOR )
Tuned to replicate Wangan Midnight Masaki RX7
Comfort Soft
CAR : Mazda Efini RX7 Type R (FD) '91
Tire : Comfort Soft
Specs
Horsepower: 444 HP / 450 PS at 7600 RPM
Torque: 334.5 ft-lb at 6000 RPM
Power Limiter at : 99.0%
Weight: 1293 kg - based on Road & Track Test
Ballast : 48 kg
Ballast Position : 47
Weight Distribution : 48 / 52 - based on Road & Track Test.
Performance Points: 510
GT AUTO
NO Oil change
Improve Body Rigidity ( NOT INSTALLED ) - Optional
Wheels : +2 Inch Up - BBS LM-R in Silver or Gold
Car Paint : Sunburst Yellow
Tuning Parts Installed :
Engine Tuning Stage 3
Sports Computer
Isometric Exhaust Manifold
Racing Exhaust
Catalytic Converter Sports
Twin Plate Clutch
Carbon Drive Shaft
Adjustable LSD
Window Weight Reduction
Carbon Hood ( Body Color )
Fully Customizable Suspension
Suspension - ARAGOSTA 12 Stage Street Coilover Damper Kit
Front, Rear
Ride Height: 115 111
Spring Rate: 10.30 7.80
Dampers (Compression): 7 6
Dampers (Extension): 3 5
Anti-Roll Bars: 5 5
Camber Angle: 1.0 1.3
Toe Angle: 0.00 0.14
LSD CUSCO Type MZ 2 Way
Initial Torque : 18
Acceleration Sensitiviy: 27
Braking Sensitivity: 27
Brake Balance:
5/6 ( personal BB) or for ABS 0 wheel : 3/4, for ABS 1 - feel free to use your preferred brake balance.
Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 5/6 brake balance as starting point.
Notes :
The Masaki RX7 is one of the unique built Wangan replica, I wanted something different with this RX7. The 91 year model in GT6 seems to be different than the Spirit R in handling. I have used a rare Aragosta 12 Stage Damper with spring rate that is unique for the street. The balance is aimed at good entry with some sideway flair on exit when needed. I kept the stock 5 speed as it's capable to hit 300kmh, while flat floor is not utilized in this version, which makes 450PS more than enough to reach top speed/red line on top gear.
Tuned and tested at Tsukuba, Willow Springs, SSR5 and SSR7.
Any input is welcomed for visual parts ( wheel color, rear wing type, paint etc ) and feedback on the handling
Yes, I expect that Wangan cars are supposed to be wild beasts on the pavement. Personally, I found this particular one to be much too wild for my own tastes. But, I don't discourage others from building their own, especially if they enjoy that sort of thing.@ALB123 It is a Wangan car, my friend, don't be disappointed. 👍
I'm sure @Ridox2JZGTE will come with detailed explanation.
Well, the verdict is in on the Wangan Midnight Masaki RX7 Replica and it's not good news. I took my bright Yellow RX7 on to Apricot Hill, as that's the track I was driving the stock from dealership car last night. My first several laps were with CS tires, which really should be fine, but they were not. Firstly, it almost feels like this car just has too much power for its chassis. It's not exactly the lightest car at almost 1300kg, but it feels a lot less when those tires just spin and spin and spin.
Again, the power is only 444hp and 335 lb/ft of torque so you wouldn't think that would be totally overwhelming, but it just is for this chassis. 1st gear is basically useless. You can give it 25% or 33% throttle when taking off and if you aren't on a decline those tires are going to get roasted. If you switch into 2nd gear and floor it, be prepared for the tires to start spinning as well, although this time you may get spun completely around. If the throttle/power issues were the only problem it wouldn't bother me as much as I am bothered by this car. And that is because this isn't the only issue - far from it.
This RX7 doesn't handle particularly well either. With a 48:52 weight distribution you would think that the car would feel more balanced than this one does. When I'm taking sweeping turns and I know something is fast approaching, or I'm going through a series of twisty turns and undulating tarmac, having to stay focus on my throttle control is one thing but not being confident in how my car is going to handle through said turns is just too much. This is a car that wants it's back end to come out and say "Hello!" and there is no way around it. Unfortunately, I found myself completely spinning out far too often. I know I'm just an average driver, but I pretty much know what I'm doing out there. Hey, at least you don't have to worry about understeer!!
I can't even really critique the brakes of the efini RX7 Type R (FD) because I spend so much time counter-steering when my car would start getting out of control. Letting off the gas was often the only way I could get this bucking bronco under control.
Applying SH tires, which is what it comes with, helped with a LOT of the issues, or I should say that it helped tone down a lot of the issues quite a lot. Now don't just take my word for it. Try this car yourself and tell me what you think! I'm going to lower the power a bit later on and see how she drives.
I will definitely be trying it with the lesser powered setup. Driving on SH tires reduced most of my issues. I have gotten so used to driving CM and CS tires on many of my Replica setups that I always try those tires first. In this case I went with CS thank god. If I struggled this much on CS, I think I would have had a LOT more problems on CM.I did said to try it with stock power first , as I 'm aware of the car has wild side ( lots of torque and narrow tires ) The easiest way to reduce it is as you had done, fit SH tire and above. To alter the way the engine deliver power, you can remove the engine tuning stage 3, and use high RPM turbo instead. This will reduce low traction issue on low engine speed with less torque generated. Flat floor is a last resort I haven't driven the car again since 1.16 update, so I may need to drive it again.
https://www.gtplanet.net/forum/thre...nx-countach-1994.294814/page-72#post-10412800Hopefully, one of the other regular visitors to this garage builds one of these RX7's one of these days. I'd love to hear their thoughts as well.
Masaki's RX7 - G27 - Kaza's review
I finally got around to doing this now...
SSR5 Test: I blasted around here really fast, it was unstable at first with a bit of oversteer, but I got used to it and hit a 1:00:XXX on Clubman circuit! (My MCR on SH can get a 0:59:XX so quite impressive!)
SSR7 Test: As with the SSR5 test, a bit of overteer in the corners. On the straightaway I maxed out at 190-ish which was a slight problem.
Overall: I like this tune! It's fun to use and I drifted it a bit on SSR5 (It's easy to drift with too)