RIDOX Replica Garage-In Memory of TurnLeft-GT40,300ZX,F430,TVR,AEM S2000,Cizeta,TransAm Doug Nash

  • Thread starter Ridox2JZGTE
  • 5,032 comments
  • 913,999 views
Dampers in GT6 play a huge part alongside springs, the dampers setup listed each have unique handling, changing them alone will alter how the car react when braking, entering a corner and exits.

I have been using real life method to tune dampers in GT6, have a look at my latest Honda CRX Del Sol for example :)
 
Yeah, I tried the other way, didn't like what it did for the car. 5/5 4/4 seems to to be the better of the two setting for me as the car doesn't hit/bounce so hard on the bumps

Last run was funny, managed to do a 720 sorry my son says I did a 1080, apparently I can't count to three lol at the 1:42 mark, lost 7-8 secs in the process and still pulled off a "Clean" 7:54:xxx

Then I went to Med tires...huge difference! I took over 15+sec off of my lap, and would have been a lot more had I not been hitting all my SH's breaking and turning marks. I can see once using the SM tires a few laps I could break into the low 7:30's...and someone who knows what they're doing on this track I am sure could take it down much further.
 
Last edited:
TODA RACING FIGHTEX Honda Civic Type R ( FD2 ) Demo Car 450PP version

TODA RACING FD2 Civic Type R Demo Car tuned for 450PP
Comfort Soft to Sports Medium




CAR : Honda Civic Type R ( FD2 ) ' 08
Tire : Comfort Soft to Sports Medium


Specs
Horsepower: 275 HP / 279 PS at 8500 RPM
Torque : 187.9 ft-lb at 6500 RPM
Power Limiter at : 99.9%
Weight: 1150 kg
Ballast : 10 kg
Ballast Position : -9
Weight Distribution : 59 / 41 - as stock.
Performance Points: 450

GT AUTO
Oil change
Improve Body Rigidity ( NOT INSTALLED ) -optional, there's no bad side effect of this, highly recommended.
Wheels : Standard Size - BLITZ BRW Profile 08 in Silver Chrome
Car Paint : Championship White


Tuning Parts Installed :
Racing Exhaust
Catalytic Converter:Sports
Isometric Exhaust Manifold
Twin Plate Clutch Kit
Adjustable LSD
Fully Customizable Suspension
Weight Reduction Stage 1
Carbon Hood ( Body Color )
Window Weight Reduction



Suspension - TODA RACING FIGHTEX Type EX Coilover
Front, Rear

Ride Height: 120 110
Spring Rate: 9.00 12.00
Dampers (Compression): 6 3
Dampers (Extension): 6 1
Anti-Roll Bars: 2 4
Camber Angle: 0.2 1.2 ( use zero camber all around for max grip )
Toe Angle: 0.08 0.00

Alternative setup for even sharper handling :

Ride Height: 120 110
Spring Rate: 9.00 12.00
Dampers (Compression): 7 5
Dampers (Extension): 7 3
Anti-Roll Bars: 3 2
Camber Angle: 0.2 1.2 ( use zero camber all around for max grip )
Toe Angle: -0.07 0.00


LSD - 1.5 way Cusco Type RS LSD
Initial Torque : 18
Acceleration Sensitivity: 20
Braking Sensitivity: 10



Brake Balance:
6/8 ( personal BB) or for ABS 0 wheel : 6/8, for ABS 1 - feel free to use your preferred brake balance. I would recommend to run two click higher on rear brake.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 6/8 brake balance as starting point.





Notes :
TODA RACING built the demo car for their line up of engine + drivetrain tune up and suspension kit. The car has 2.2 TODA Racing Stoker kit fitted along with complete internal upgrades + high lift camshaft, sports injection, updated ECU, full exhaust system, intake and exhaust manifold. The car estimated to produce roughly 280PS :D The car also fitted with Work Emotion 18 inch wheel - closest match in GT6 is BLITZ BRW Profile 08.

Since detailed power data is hard to find, I have to calculate rough estimate based on a known FD2 Civic with TODA upgrade package without stroker kit, intake and sports injection ( 7 PS increase ) has around 248PS. 280PS IMO is pretty accurate based on information from people that I consulted :)

This version is optimized for 450PP, different ride height, front damper, anti roll bar and front toe are used. Power and torque have been tweaked as well as weight for optimum balance of power/weight/torque.

Tuned and tested at Laguna Seca, Tsukuba and Street of Willow. When tested at Tsukuba the car is capable of easily hitting 1:05s lap on comfort soft. My best lap so far is at 1:04.5xx at Tsukuba on comfort soft. Very quick for 450PP FF car.

UPDATE : 1.05, new alternative setup with damper optimized for more response, ARB setup for better turn in and stability, toe out for added steering response. Brake balance set at 6/8 for better rotation.

ENJOY :cheers:

One of the quickest, best handling 450PP FF car has been updated, new alternative suspension setup for even sharper handling as well as updated brake balance. Consistent 1:05s at Tsukuba on comfort soft with best lap at 1:04.5xxx ( still on stock gearbox ) :)👍


This little pocket rocket is coming soon ( 450PP, 1:05s on comfort soft at Tsukuba )


City of Arts and Sciences - Night_56.jpg
 
Last edited:
J's Racing Honda EG2 CR-X Del Sol B18C Track Racer

Tuned to replicate J's Racing Honda EG2 CRX Del Sol B18C Tsukuba Time Attack
Comfort Soft to Sports Medium




CAR : Honda CR-X Del Sol SiR '92
Tire : Comfort Soft to Sports Medium


Specs
Horsepower: 239 HP / 242 PS at 8100 RPM
Torque : 158.3 ft-lb at 7500 RPM
Power Limiter at : 98.6%
Weight: 1040 kg
Ballast : 105 kg
Ballast Position : -34
Weight Distribution : 61 / 39 - as real life spec.
Performance Points: 431

GT AUTO
Oil change
Improve Body Rigidity ( INSTALLED ) - the real car has chassis reinforcement and racing spec roll cage
Wheels : Standard Size - PDI P525N or RAYS 57Gainer in Silver Chrome/Black
Car Paint : Indy Yellow Pearl


Tuning Parts Installed :
Engine Tuning Stage 1
Semi Racing Exhaust
Isometric Exhaust Manifold
Intake Tuning
Twin Plate Clutch
Fully Customizable Dog Clutch Transmission
Adjustable LSD
Fully Customizable Suspension
Weigh Reduction Stage 3



Suspension - J's Racing CRUX Engineering SPL Racing Coilover
Front, Rear

Ride Height: 110 100
Spring Rate: 14.00 10.00
Dampers (Compression): 9 4
Dampers (Extension): 5 2
Anti-Roll Bars: 3 4
Camber Angle: 0.2 1.4 ( use alternate zero camber all around for max grip )
Toe Angle: -0.16 0.00



LSD - 1.5 way J's Racing High Traction LSD
Initial Torque : 18
Acceleration Sensitivity: 33
Braking Sensitivity: 17


DOG CLUTCH TRANSMISSION - Stock gearing with J's Racing 4.7 Final Gear
Set Default
Set Final to 4.700
Set Auto Max Speed to 280kmh / 174mph
Adjust each gear :
1st 3.230
2nd 2.105
3rd 1.458
4th 1.107
5th 0.848
6th 0.700 ( feel free to set according to your needs or simply ignore it as the real car has only 5 speed )


Brake Balance:
8/10 ( personal BB) or for ABS 0 wheel : 6/8, for ABS 1 - feel free to use your preferred brake balance. I would recommend to run two click higher on rear brake.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 8/10 brake balance as starting point.





Notes :
This car is built according to a J's Racing built customer track racer back in the late 90's, the car was sold off and left Japan to live as track day car. Information for the build is very hard to find, I have to scour forums, and J's Racing sites, and finally got a user who have been close with the car owner that can give me further details on power specs for the J's Racing B18C race engine, suspension, LSD etc.

The car is one mean FF machine, the body has been gutted, reinforced and fitted with a roll cage, weighs at 1040 kg. Powerplant came from J's Racing hand built B18C racing engine producing 220PS at the wheel, the engine alone costs more than half the price of a brand new Del Sol at over a million yen :eek:

LSD uses J's Racing High Traction model with low initial torque, 55/25 cam angle and locking rate tuned for R comp Semi Slick ( S tire or Sports Medium in GT6 ). Final gear also uses J's Racing 4.7 ratio built to withstand higher power for racing. Suspension has been upgraded with newer J's Racing CRUX Engineering SPL version Racing Damper Kit, with spring rate set at 14/10 aimed at racing on the track.

For GT6 replica, I tuned and tested mainly on Tsukuba and Nurb GP/F using comfort soft tires. The power might overwhelm the street tire easily on low speed exit and tight turns, modulate the throttle if necessary.

At Tsukuba the car managed easy 1:05s flat on sports medium with 1:04 within reach or maybe even 1:03. This Del Sol has pretty tight handling overall, but still relatively easy to rotate and throw around with smooth throttle and steering. Always trail brake and slow in fast out :D

ENJOY :cheers:
Interesting car but the skinny tires kills the magic. 👍
BMW E92 M3 GTS

Tuned to replicate BMW E92 M3 GTS based on M3 Chrome Line
Comfort Soft to Sports Medium




CAR : BMW M3 Coupe Chrome Line
Tire : Comfort Soft to Sports Medium



Specs
Horsepower: 444 HP / 450 PS at 7900 RPM
Torque : 328.8 ft-lb at 5000 RPM
Power Limiter at : 91.0%
Weight: 1530 kg
Ballast : 84 kg
Ballast Position : -5
Weight Distribution : 50 / 50 - real life 50.8/49.2 reflected in ballast position.
Performance Points: 506


GT AUTO
Oil change
Improve Body Rigidity ( INSTALLED ) - OPTIONAL - the real car has chassis reinforcement and track spec roll cage
Aero Kits Type A
Rear Wing : Generic Wing Type C
Wheels : +1 Inch Up - BBS RE-MG in Black Matte / GT6 Matte 008
Car Paint : Monaco Orange


Tuning Parts Installed :
Sports Exhaust
Intake Tuning
Fully Customizable Dog Clutch Transmission
Adjustable LSD
Fully Customizable Suspension
Weigh Reduction Stage 1



Suspension - KW Club Sport M3 GTS Coilover
Front, Rear

Ride Height: 90 82
Spring Rate: 9.07 14.27
Dampers (Compression): 5 5
Dampers (Extension): 4 4
Anti-Roll Bars: 5 3
Camber Angle: 0.2 0.2 ( use alternate zero camber all around for max grip )
Toe Angle: 0.06 0.12

Alternative Damper Setup for various track based/adapted from KW Club Sport Recommended Setup and real life setup :

Winding/Twisty + Bumpy Road ( Nordschleife, Touge etc )
Dampers (Compression): 5 5
Dampers (Extension): 4 4

Track - High Speed Stability ( Nurb GP/F, Willow Springs )
Dampers (Compression): 5 5
Dampers (Extension): 5 6

Track - Loose + Technical Track ( Tsukuba ) -KW Recommended Setup
Dampers (Compression): 5 5
Dampers (Extension): 6 5

Street - Cruise
Dampers (Compression): 2 2
Dampers (Extension): 2 1




LSD - 1.5way
Initial Torque : 20
Acceleration Sensitivity: 30
Braking Sensitivity: 15


DOG CLUTCH TRANSMISSION - Adapted 7 Speed Drivelogic
Set Default
Set Auto Max Speed to 250kmh / 155mph
Adjust each gear :
1st 4.780
2nd 3.056
3rd 2.153
4th 1.678
5th 1.390
6th 1.000 ( the real 6th gear is omitted, 7th gear is used instead to maintain real life top speed )
Set Final Gear : 3.154

If wanted to lower top speed in favour of acceleration, simply replace 6th 1.000 with the real 6th ratio : 1.203


AERO
Rear : 20 ( MAX )


Brake Balance:
8/8 ( personal BB) or for ABS 0 wheel : 6/6, for ABS 1 - feel free to use your preferred brake balance.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 8/8 brake balance as starting point.




Notes :
BMW M3 GTS, with 444HP/450PS, 1530kg. The replica is built upon request, I researched BMW M forums, press releases, car reviews and consulting owners of M3 via forum.

Suspension damper settings are adapted from real life setup and KW recommended setup, use these to your preferences. Try them all, and see which one works best for given track and tire used. Personally I used winding/twisty setup. Improve Body Rigidity is optional, I suggest to install it only when you feel the car is too loose as it makes is a bit more responsive but tighter.

The replica uses comfort soft tires in order to replicate lap time accurately. The M3 GTS managed to lap Nurb GP/F in easily consistent 2:21s just like real life lap time record.

I decided to combine 6th and 7th into one, the replica uses real life 7th for 6th. Please read the notes on gear ratio section for explanation. Shift up from 5th to 6th on redline.

When tested at Nordschleife, the car managed sub 8 minutes with ease on comfort soft tire, so it should be able to replicate real life lap record easily.

Use the brakes to rotate on entry and throttle to steer the car one exit :D I have lots of enjoyment driving this replica, hopefully you will too.

ENJOY :cheers:
Very good car, shame it's too heavy. :cheers:
 
Interesting car but the skinny tires kills the magic. 👍

Very good car, shame it's too heavy. :cheers:

The Del Sol is unique indeed, the Fit RS has similar skinny tire, but has better grip/handling overall than the del sol even when the Fit has higher torque :(

The BMW M3 GTS is a replica, but you are free to reduce the weight further to make it more competitive :)

I have Lancia Stratos at 450PP and 500PP coming as well, the 450PP version can do 1:05s at Tsukuba on comfort soft with a stock gearing :eek:


Nürburgring Nordschleife_21.jpg


Nürburgring Nordschleife_22.jpg

 
Last edited:
The Del Sol is unique indeed, the Fit RS has similar skinny tire, but has better grip/handling overall than the del sol even when the Fit has higher torque :(

The BMW M3 GTS is a replica, but you are free to reduce the weight further to make it more competitive :)

I have Lancia Stratos at 450PP and 500PP coming as well, the 450PP version can do 1:05s at Tsukuba on comfort soft with a stock gearing :eek:




LOL< you're going to attempt to tame this savage beast :nervous: I wonder 💡 how much weight and front ballast all those lights carry :crazy:


OK, so I had an extra 325,000 plus parts lying around, had to have those lights...and they work too lol....so I for now just put on the Default soft racing suspension...Took it out on Nuremberg...10+ mins, its was shameful:embarrassed: I see why it was a rally car, cause it wanted to spend time in the grass than the asphalt....now, I was using CS tires, but dam, my 70 Nova SS with SH, I got well under 8 mins. This car is tail happy, just wants to nose in and swing its ass all over the track....you have you work cut out for you on this one :banghead:
 
Last edited:
LOL< you're going to attempt to tame this savage beast :nervous: I wonder 💡 how much weight and front ballast all those lights carry :crazy:


OK, so I had an extra 325,000 plus parts lying around, had to have those lights...and they work too lol....so I for now just put on the Default soft racing suspension...Took it out on Nuremberg...10+ mins, its was shameful:embarrassed: I see why it was a rally car, cause it wanted to spend time in the grass than the asphalt....now, I was using CS tires, but dam, my 70 Nova SS with SH, I got well under 8 mins. This car is tail happy, just wants to nose in and swing its ass all over the track....you have you work cut out for you on this one :banghead:

The Stratos will have real life weight distribution at 46/54, and it's very much fun to drive, not a savage beast :P

R32 is more front heavy than actual R34 (because it's 57:43)?! Didn't know that o.O

I found the information from an owner who have corner weighted R32 GTR ( fuel and driver inside ), and his was 58/42, some R32 GTR has 60/40 and 59/41, depend on the ride height ( yes this affects distribution too ) and stuff in the car ( mods and stereo ). With Mine's I decided to use 58/42 as I also read from a magazine article on a lightened R32 GTR for track days at sub 1400kg also has 58/42 and other racing sim which have the car ( Mine's ) uses 58/42. :D
 
Lancia Stratos HF Stradale 450PP version

Lancia Stratos HF Stradale - special build at 450PP
Comfort Soft to Sports Soft




CAR : LANCIA STRATOS '73
Tire : Comfort Soft to Sports Soft


Specs
Horsepower: 252 HP / 255 PS at 7200 RPM
Torque : 207.7 ft-lb at 4700 RPM
Power Limiter at : 98.9%
Weight: 980 kg
Ballast : 99 kg
Ballast Position : -48
Weight Distribution : 46 / 54 - as in real life street version spec.
Performance Points: 450

GT AUTO
Oil change
Improve Body Rigidity ( NOT INSTALLED ) - OPTIONAL - I have one built with this installed - works great on ABS 0.
Aero Kits Type A
Rear Wing - NO WING
Other Part A ( lights )
Wheels : Standard Size - PDI P525N in GT6 Matte 018
Car Paint : GT6 Metallic 012 Anniversary Deep Blue


Tuning Parts Installed :
Sports Computer
Racing Exhaust
Intake Tuning
Catalytic Converter Sports
Twin Plate Clutch
Fully Customizable Dog Clutch Transmission
Adjustable LSD
Fully Customizable Suspension
Weigh Reduction Stage 2
Window Weight Reduction



Suspension - Gr4 Eibach ERS Springs and Bilstein Damper Coilover Kit ( 450/475 )
Front, Rear

Ride Height: 120 120
Spring Rate: 8.00 8.48
Dampers (Compression): 6 7
Dampers (Extension): 6 6
Anti-Roll Bars: 5 4
Camber Angle: 0.0 0.0
Toe Angle: 0.10 0.10

Alternative suspension setup for bumpy track :

Ride Height: 130 130
Spring Rate: 8.00 8.48
Dampers (Compression): 6 4
Dampers (Extension): 6 3
Anti-Roll Bars: 6 4
Camber Angle: 0.0 0.0
Toe Angle: 0.10 0.10


LSD - 2 way ZF Plate based LSD low lock, medium preload
Initial Torque : 20
Acceleration Sensitivity: 24
Braking Sensitivity: 24 -increase to 30/37 to reduce brake lift off oversteer if necessary.



DOG CLUTCH TRANSMISSION - Gr4 Rally Gearset with stock Final Gear
Install all power parts
Set Default
Set Final to 4.000
Set Auto Max Speed to 240kmh / 149mph
Adjust each gear :
1st 3.143
2nd 2.240
3rd 1.762
4th 1.417
5th 1.154
Set Final : 3.824 ( Adjust final according to track if necessary )


Brake Balance:
8/6 ( personal BB) or for ABS 0 wheel : 8/6, for ABS 1 - feel free to use your preferred brake balance.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 8/6 brake balance as starting point.





Notes :
I have this Stratos since release day, used often on cruise lobby online on lesser state of tune. I decided to tune up to 450PP. The weight kept at stock level, with weight distribution fixed to replicate real life car spec ( HF Stradale ). I removed the rear spoiler and installed rally style front lights :D

Using Gr4 spec suspension, LSD and gearing. Suspension comes from Eibach Gr 4 ERS springs, Bilstein Damper with conservative 450/475 spring rate, while LSD from Gr 4 ZF plate based LSD with max lock set at 40%. For gearing, I used Gr 4 Stratos HF Rally close ratio gearset to make sure the engine stays on the sweet spot range.

With the tune, this Stratos HF Stradale is able to lap Tsukuba in easy consistent 1:05s on comfort soft even on stock gearing, with a best lap of 1:04s :eek: The tune works on comfort soft and below if you are a throttle master ;), all sports tire and also has been tested on racing hard with good result.

Tuned and tested at Tsukuba, Bathurst, Big Willow, Nurb GP/F and Nordschleife :D The car is pretty stable, with good rotation, always brake smoothly, apply a bit of throttle when lifting the brakes to avoid excessive rotation. When the car pushes/understeer, reduce throttle - do not lift off all of a sudden, modulate at around 50%, this will make the car rotate smoothly. And lastly, do not jerk the steering when on a curve or driving at high speed, the car do not like rough steering input :)

ENJOY :cheers:
 
Last edited:
Lancia Stratos TURBO HF Stradale 500PP version

Lancia Stratos TURBO HF Stradale - special build at 500PP
Comfort Soft to Sports Soft




CAR : LANCIA STRATOS '73
Tire : Comfort Soft to Sports Soft


Specs
Horsepower: 363 HP / 368 PS at 7800 RPM
Torque : 265.8 ft-lb at 5800 RPM
Power Limiter at : 100%
Weight: 980 kg
Ballast : 99 kg
Ballast Position : -48
Weight Distribution : 46 / 54 - as in real life street version spec.
Performance Points: 500

GT AUTO
Oil change
Improve Body Rigidity ( NOT INSTALLED ) - OPTIONAL - I have one built with this installed - works great on ABS 0.
Aero Kits Type A
Rear Wing - NO WING
Other Part A ( lights )
Wheels : Standard Size - PDI P525N in GT6 Matte 018
Car Paint : GT6 Metallic 012 Anniversary Deep Blue


Tuning Parts Installed :
Engine Tuning Stage 1
Sports Computer
Racing Exhaust
Isometric Exhaust Manifold
Intake Tuning
High RPM Range Turbo Kit
Catalytic Converter Sports
Racing Brakes Kit
Twin Plate Clutch
Fully Customizable Dog Clutch Transmission
Adjustable LSD
Fully Customizable Suspension
Weigh Reduction Stage 2
Window Weight Reduction



Suspension - Gr4 Eibach ERS Springs and Bilstein Damper Coilover Kit ( 450/475 )
Front, Rear

Ride Height: 120 120
Spring Rate: 8.00 8.48
Dampers (Compression): 6 7
Dampers (Extension): 6 6
Anti-Roll Bars: 6 4
Camber Angle: 0.0 0.0
Toe Angle: 0.10 0.15

Alternative suspension setup for bumpy track :

Ride Height: 130 130
Spring Rate: 8.00 8.48
Dampers (Compression): 6 4
Dampers (Extension): 6 3
Anti-Roll Bars: 6 4
Camber Angle: 0.0 0.0
Toe Angle: 0.10 0.15

LSD - 2 way ZF Plate based LSD low lock, medium preload
Initial Torque : 16
Acceleration Sensitivity: 24
Braking Sensitivity: 24 -increase to 30/37 to reduce brake lift off oversteer if necessary.


DOG CLUTCH TRANSMISSION - Gr4 Rally Gearset with stock Final Gear
Install all power parts
Set Default
Set Auto Max Speed to 260kmh / 162mph
Adjust each gear :
1st 3.143
2nd 2.240
3rd 1.762
4th 1.417
5th 1.154
Set Final : 3.824 or 2.824 for top speed / track with long straight ( Adjust final according to track if necessary )


Brake Balance:
7/5 ( personal BB) or for ABS 0 wheel : 5/3, for ABS 1 - feel free to use your preferred brake balance.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 7/5 brake balance as starting point.





Notes :
I have this Stratos since release day, used often on cruise lobby online on lesser state of tune. I decided to tune up to 500PP. The weight kept at stock level, with weight distribution fixed to replicate real life car spec ( HF Stradale ). I removed the rear spoiler and installed rally style front lights :D

Using Gr4 spec suspension, LSD and gearing. Suspension comes from Eibach Gr 4 ERS springs, Bilstein Damper with conservative 450/475 spring rate, while LSD from Gr 4 ZF plate based LSD with max lock set at 40%. For gearing, I used Gr 4 Stratos HF Rally close ratio gearset to make sure the engine stays on the sweet spot range.

With the tune, this Stratos Turbo HF Stradale works on comfort soft and below if you are a throttle master ;), all sports tire and also has been tested on racing hard with good result. Minor differences with the 450PP, the front ARB has been increased, higher rear toe in for better traction/stability. LSD initial torque has been adjusted to reflect the higher engine torque. Turbo kit has been installed, giving much higher torque and peak HP. Final gear 2.824 is highly recommended for high speed tracks like Nordschleife.

Tuned and tested at Tsukuba, Bathurst, Big Willow, Nurb GP/F and Nordschleife :D The car is pretty stable, with good rotation, always brake smoothly, apply a bit of throttle when lifting the brakes to avoid excessive rotation. When the car pushes/understeer, reduce throttle - do not lift off all of a sudden, modulate at around 50%, this will make the car rotate smoothly. And lastly, do not jerk the steering when on a curve or driving at high speed, the car do not like rough steering input :)

ENJOY :cheers:
 
Last edited:
CUSCO Mitsubishi FTO GR '94 220PS RIDOX ver.

CUSCO Inspired FTO Project - Comfort Medium to Sports Soft


CAR : Mitsubishi FTO GR '94
Tire : Comfort Medium to Sports Soft


Specs
Horsepower: 220 PS at 7600 RPM
Torque: 165.3 ft-lb at 4600 RPM
Power Limiter at : 100%
Weight: 1145 kg
Ballast : 0 kg
Ballast Position : 0
Weight Distribution : 59/41 as stock
Performance Points: 416




GT AUTO
Oil Change
Improve Body Rigidity ( Optional ) - there's no bad side effect of this, highly recommended.
Wheels :+2 Inch up - RAY TE37SL in Silver
Car Paint : White


Tuning Parts Installed :
Sports Computer
Semi Racing Exhaust
Isometric Exhaust Manifold
Catalytic Converter Sports
Suspension Fully Customizable Kit
Adjustable LSD
Twin Plate Clutch Kit
Carbon Hood Body Color


LSD - CUSCO 2 way Type RS 55/55 cam angle, medium preload
Initial Torque : 16
Acceleration Sensitivity: 37
Braking Sensitivity: 37


Suspension - CUSCO Coil Over CN ZERO 2R Custom Preset Spring Rate Pack
Front, Rear

Ride Height: 130 120
Spring Rate: 6.0 7.0 ( optional preset CUSCO Zero 2R spring F : 6,7,8,9,10 and R : 4,5,6,7 )
Dampers (Compression): 6 7
Dampers (Extension): 3 4
Anti-Roll Bars: 2 4
Camber Angle: 0.2 1.2 ( use zero camber all around for max grip )
Toe Angle: -0.07 0.00


Brake Balance :
8/10 ( personal BB) or for ABS 0 wheel : 8/10, for ABS 1 - feel free to use your preferred brake balance. I recommend to run 2 click higher on the rear brake.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 8/10 brake balance as starting point.



Notes :

What can I say, this CUSCO Project was started early when I got GT6, the car has seen many races. The build is extreme for an FF car, handling wise. Power upgrades are subtle, aiming for better response around corners. LSD is CUSCO 2 way Type RS, as in real life, this 2 way on FF car is brutal, finesse and certain skill set are necessary to avoid understeer, be smooth, brake early, manage weight transfer and enjoy mid corner to exit traction.

Suspension based on CUSCO DE3A Coil Over Damper KIT CN ZERO-2R, spring rate are custom taken from preset CUSCO Springs available for the Zero-2R damper : optional preset spring F : 6,7,8,9,10 and R : 4,5,6,7, The 6/7 spring set is the best I have tested that gives good balance.

Test and tuned at Mt Panorama-Bathurst in the rain, Brand Hatch GP, Tsukuba, Streets of Willow and Stowe Cicuit.

UPDATE : 1.05 version, new damper, new coilover kit with new spring rate set, new ARB, camber and toe to give the FTO excellent balance. Updated LSD initial torque to maximize the suspension and the tune works for all comfort and sports tire ( sports soft )

The CUSCO ZERO FTO GR has been updated, receiving massive handling and LSD overhaul :) A 450PP version is coming as well.
 
CUSCO Mitsubishi FTO GR '94 220PS RIDOX ver.

CUSCO Inspired FTO Project - Comfort Medium to Sports Soft


CAR : Mitsubishi FTO GR '94
Tire : Comfort Medium to Sports Soft


Specs
Horsepower: 220 PS at 7600 RPM
Torque: 165.3 ft-lb at 4600 RPM
Power Limiter at : 100%
Weight: 1145 kg
Ballast : 0 kg
Ballast Position : 0
Weight Distribution : 59/41 as stock
Performance Points: 416




GT AUTO
Oil Change
Improve Body Rigidity ( Optional ) - there's no bad side effect of this, highly recommended.
Wheels :+2 Inch up - RAY TE37SL in Silver
Car Paint : White


Tuning Parts Installed :
Sports Computer
Semi Racing Exhaust
Isometric Exhaust Manifold
Catalytic Converter Sports
Suspension Fully Customizable Kit
Adjustable LSD
Twin Plate Clutch Kit
Carbon Hood Body Color


LSD - CUSCO 2 way Type RS 55/55 cam angle, medium preload
Initial Torque : 16
Acceleration Sensitivity: 37
Braking Sensitivity: 37


Suspension - CUSCO Coil Over CN ZERO 2R Custom Preset Spring Rate Pack
Front, Rear

Ride Height: 130 120
Spring Rate: 6.0 7.0 ( optional preset CUSCO Zero 2R spring F : 6,7,8,9,10 and R : 4,5,6,7 )
Dampers (Compression): 6 7
Dampers (Extension): 3 4
Anti-Roll Bars: 2 4
Camber Angle: 0.2 1.2 ( use zero camber all around for max grip )
Toe Angle: -0.07 0.00


Brake Balance :
8/10 ( personal BB) or for ABS 0 wheel : 8/10, for ABS 1 - feel free to use your preferred brake balance. I recommend to run 2 click higher on the rear brake.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 8/10 brake balance as starting point.



Notes :

What can I say, this CUSCO Project was started early when I got GT6, the car has seen many races. The build is extreme for an FF car, handling wise. Power upgrades are subtle, aiming for better response around corners. LSD is CUSCO 2 way Type RS, as in real life, this 2 way on FF car is brutal, finesse and certain skill set are necessary to avoid understeer, be smooth, brake early, manage weight transfer and enjoy mid corner to exit traction.

Suspension based on CUSCO DE3A Coil Over Damper KIT CN ZERO-2R, spring rate are custom taken from preset CUSCO Springs available for the Zero-2R damper : optional preset spring F : 6,7,8,9,10 and R : 4,5,6,7, The 6/7 spring set is the best I have tested that gives good balance.

Test and tuned at Mt Panorama-Bathurst in the rain, Brand Hatch GP, Tsukuba, Streets of Willow and Stowe Cicuit.

UPDATE : 1.05 version, new damper, new coilover kit with new spring rate set, new ARB, camber and toe to give the FTO excellent balance. Updated LSD initial torque to maximize the suspension and the tune works for all comfort and sports tire ( sports soft )
Great sensation, @Ridox! Beautiful! 👍
 
RENAULT SPORT Clio RS '11 420PP version

Special build at 420PP for Super Lap at Brands Hatch Indy
Comfort Soft



Brands Hatch Indy Circuit_1.jpg



CAR : Renault Sport Clio R.S. '11
Tire : Comfort Soft


Specs
Horsepower: 204 HP at 6700 RPM
Torque : 169.4 ft-lb at 5500 RPM
Power Limiter at : 95.7%
Weight: 1054 kg
Ballast : 15 kg
Ballast Position : 0
Weight Distribution : 52 / 48
Performance Points: 420

GT AUTO
NO Oil change
Improve Body Rigidity ( NOT INSTALLED ) - OPTIONAL -
Aero Kits Type A
Rear Wing - Custom Wing Type B
Wheels : +1 Inch Up - RAYS VR.G2 in Black
Car Paint : GT6 Chrome 004


Tuning Parts Installed :
Intake Tuning
Triple Plate Clutch
Fully Customizable Dog Clutch Transmission
Adjustable LSD
Fully Customizable Suspension
Weigh Reduction Stage 3
Carbon Hood ( Body Color )
Window Weight Reduction



Suspension - H&R Coilover Kit
Front, Rear

Ride Height: 75 85
Spring Rate: 8.16 8.16
Dampers (Compression): 8 6
Dampers (Extension): 5 5
Anti-Roll Bars: 3 2
Camber Angle: 0.0 0.8
Toe Angle: -0.08 0.00



Brands Hatch Indy Circuit_4.jpg


LSD - 1.5 way LSD
Initial Torque : 15
Acceleration Sensitivity: 24
Braking Sensitivity: 5


DOG CLUTCH TRANSMISSION
Install all power parts
Set Default
Use default Auto Max Speed at 240kmh / 149mph
Adjust each gear :
1st 3.086
2nd 2.170
3rd 1.625
4th 1.273
5th 1.042
6th 0.865
Set Final : 5.000


Brake Balance:
8/10 ( personal BB) or for ABS 0 wheel : 6/8, for ABS 1 - feel free to use your preferred brake balance.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 8/10 brake balance as starting point. Alternative brake balance 6/10 or 7/10.


Brands Hatch Indy Circuit_8.jpg




Notes :

I have built the Clio RS on 450PP and about to post the tune here, but I decided to make a lesser state tune at 420PP for the Brands Hatch Indy Super Lap.

The car uses H&R Coilover Kit with spring rate at 80N/mm front and rear. LSD is optimized for traction and response without sacrificing steering response. The original 450PP tune has over 1200kg with distribution as closest as possible to the real car which has 65/35 :eek: But for this version, the tune is focused on light weight, agility and balance around corners. It was originally tested and tuned at Tsukuba, but I found with slight changes, works pretty well at Brands Hatch Indy.

The car is capable of 54s ( GOLD ) without SRF or any other aids - ABS 0, and should be able to do 53s with a better driver. My best time has flat 21s 1st sector at around mid 54s lap. Should be a good base for those who wanted to try something different :D


ENJOY :cheers:
 
I highly appreciate, that from time to time, or when it's necessary, you recheck your setups.

It's kinda cleaning your house. 👍

I will be updating older tunes and replicas made before 1.04 :)

This one is another update 👍 Spec Miata updated, should be better now ;)

SPEC MIATA Replica ( FITT MIATA TUNING Challenge by MCH version )
Tuned to replicate Spec Miata MX5 - FITT Tuning Challenge version
Comfort Soft to Sports Medium





CAR : Mazda MX-5 Miata SR-Limited (NA,J) '97
Tire : Comfort Soft to Sports Medium


Specs
Horsepower: 135 HP at 6400 RPM
Torque: 131.1 ft-lb at 4600 RPM
Power Limiter at : 90%
Weight: 950 kg
Ballast : 93 kg
Ballast Position : 40
Weight Distribution : 51/49 - rough spec based on real life spec miata car.
Performance Points: 371


GT AUTO
NO Oil change
Front Aero Type A
Improve Body Rigidity ( NOT INSTALLED )
Wheels : +1 Inch Up - Enkei SC03 painted in silver/grey
Car Paint : Sublime


Tuning Parts Installed :
Engine Tuning Stage 1
Isometric Exhaust Manifold
Suspension Fully Customizable Kit
Adjustable LSD
Five Speed Transmission
Weight Reduction Stage 3
Carbon Hood ( Body Color )
Window Weight Reduction



LSD 1.5 way
Initial Torque : 15
Acceleration Sensitivity: 20
Braking Sensitivity: 5



Suspension - Bilstein Spec Miata
Front, Rear

Ride Height: 107 107
Spring Rate: 12.50 5.80
Dampers (Compression): 6 4
Dampers (Extension): 6 3
Anti-Roll Bars: 5 6
Camber Angle: 0.2 0.2 ( use zero camber all around for max grip )
Toe Angle: -0.07 0.00


Brake Balance:
8/10 ( personal BB) or for ABS 0 wheel : 6/8, for ABS 1 8/10 or feel free to use your preferred brake balance. I recommend to run 2 click higher at the rear.


Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 8/10 brake balance as starting point.


Notes :
I built the spec Miata replica long ago, it's still work in progress with some settings/specs still need to be work on. This replica is fine tuned to fit the rules for tuning challenge.
The car uses Spec Miata suspension setup as close as possible to real life, the balance is good with stable rear end and pretty agile front. Care need to be taken when exiting corners, the rear can wiggle a bit, but it should pose no problem :)

I tested the car at Streets of Willow together with a friend, the car can do 1:27s lap with ease, a good run would see sub 40s 2nd sector ( at fish bowl ). Tune is sill not final :) Fit Sports Medium to get close to real life Hoosier Spec Miata R6 DOT racing tire.

UPDATE 1.05 : New Damper setup aimed at neutral balance with a little loose flavor on exit. Ride height is level now as previously was set as replica giving low front, high rear - tendency to understeer.
ARB has been adjusted to complement new damper, giving more responsive feedback.
Camber set at 0.2 all around as I like the number and the feel of it :lol:
Toe out at the front increased slightly for better steering response, and rear at neutral for better directional changes mid corner.
Brake balance set at 2 click higher at the rear to reduce the push under heavy braking.
LSD has been revised with low preload and lower locking during braking and coasting.

@Motor City Hami, Hi, I got the Spec Miata tune updated, this is not the same as the one posted on the FITT Miata Challenge, if you are interested, give it ago, make sure to read the tune notes :D It should not have understeer issue like the FITT Miata version.
 
Here is a part of my method to tuning cars in GT6 - this is posted at Stratos Difficult Car thread :

With spring rate set/chosen, time to tune the rest of the suspension ( Deciding the spring rate also can be done in similar method as with damper below - the higher the grip of the tire, the harder the spring, running racing tires with very soft spring is not advisable )

Damper, here is a simple step that I adapted from the method that I did in real world, start off with all at lowest value, this includes compression, extension, ARB, and zero toe as well as camber. Drive the car on the track where you can be consistent and has variety corners to highlight the car's weakness easily. I would suggest to set the LSD to 5/5/5 first.

Now, make changes to rear compression only, change to max at 10, and drive for several laps, make a note of how the car handle, go back and reduce by 2, 8 then 6 then 4 and so on, this will take time, so use shorter track if you prefer. Once you feel the rear has better traction and rides the bumps well, continue to adjusting the rear extension, set it at max, then one click higher than compression, then same as compression and 1/2 click lower. Make a note of each setting handling, choose one which gives better stability under acceleration on mid corner and exits. Also pay attention to how the car rotates when braking and turning. Now onto the front damper, with the rear setup done, do the same on the front compression, make a note of each value, how the car behaved under braking, hitting bumps, changing directions and corner entry grip. Set to the value that gives the best feel. Then do the extension, find one that gives good braking ability, less understeer/push on entry.

Now the damper is done, time for the ARB, as they are set at 1 front and back, the car will have some roll ( depend on the weight, chassis and spring rate strength ). Increase rear to max, and drive the car, notice how the rear has less roll and much more responsive, but usually becomes tight on the limit. Same steps, reduce and drive until you find a value that feels responsive but give the car good rotation. Do the same with front ARB, at max, it should be responsive but very tight when entering mid/high speed, find the spot that balance the response and entry rotation.

For camber, any value above 0.0 will reduce grip, so use that to your advantage, if you have FF car that still lack in rotation for example, use front 0.0 and rear at 0.5 or above - I don't recommend to go above 1.5, as usually it starts to hit cornering speed and the rear loses grip too easily. For the Stratos, if the front tires is too grippy, use 0.2 for a start, I don't recommend higher than 1.0 as it will be detrimental to front tire grip causing understeer and lower cornering speed.

Toe : I usually use real world alignment and there's should be no need to use high value if the spring, damper, ARB and camber sorted out. I never use more than toe in or out of 0.30. For FF car, 0.10 toe out or less is usually enough with neutral rear at 0.00. Use both toe in for Stratos - as IRL, Stratos HF Stradale owners used front toe in and neutral rear or same toe in as front ( 1mm to 2mm ), don't go too high as it will induce understeer, 0.15 to 0.19 toe in is more than enough IMO.
 
J's Racing Honda FIT RS Turbo '10 450PP

Special build of J's Racing Honda FIT RS '10 at 450PP based on Super Taikyu
Comfort Soft to Sports Medium



Tsukuba Circuit_45.jpg



CAR : Honda FIT RS '10
Tire : Comfort Soft to Sports Medium


Specs
Horsepower: 237 HP at 7300 RPM
Torque : 181.2 ft-lb at 6300 RPM
Power Limiter at : 100%
Weight: 930 kg
Ballast : 53 kg
Ballast Position : -43
Weight Distribution : 62 / 38 - as in real life spec
Performance Points: 450

GT AUTO
Oil change
Improve Body Rigidity ( INSTALLED IN THIS BUILD ) - OPTIONAL - the J's Racing FIT has extensive chassis reinforcement and roll cage.
Aero Kits Type A
Rear Wing - Custom Wing Type B
Wheels : Standard Size - RAYS 57Gainer in GT6 Matte 017
Car Paint : GT6 Polarized 016


Tuning Parts Installed :
Engine Tuning Stage 1
Sports Computer
Racing Exhaust
Catalytic Converter Sports
High RPM Range Turbo Kit
Twin Plate Clutch
Fully Customizable Dog Clutch Transmission
Adjustable LSD
Fully Customizable Suspension
Weigh Reduction Stage 3
Carbon Hood ( Body Color )
Window Weight Reduction



Suspension - J's Racing SPL OHLINS TYPE S Coilover Kit ( -50mm/-60mm maximum drop )
Front, Rear

Ride Height: 100 90
Spring Rate: 10.00 6.00
Dampers (Compression): 5 3
Dampers (Extension): 3 4
Anti-Roll Bars: 4 5
Camber Angle: 0.2 1.2 ( use zero camber all around for max grip )
Toe Angle: 0.07 -0.07 ( Optional rear toe out : -0.60 or -0.28 for better turn in response )


City of Arts and Sciences - Night_54.jpg


LSD - 1.5 way LSD -medium preload
Initial Torque : 18
Acceleration Sensitivity: 20
Braking Sensitivity: 10


DOG CLUTCH TRANSMISSION - 6 Speed Close ratio with ATS Final Gear
Install all power parts
Set Default
Use default Auto Max Speed at 200kmh / 124mph
Adjust each gear :
1st 3.000
2nd 2.175
3rd 1.650
4th 1.325
5th 1.100
6th 0.925
Set Final : 4.688 - ( adjust final according to track if necessary )


AERO
REAR : 20 ( MAX )


Brake Balance:
8/10 ( personal BB) or for ABS 0 wheel : 6/8, for ABS 1 - feel free to use your preferred brake balance. I recommend to run 2 click higher at the rear.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 8/10 brake balance as starting point.

Ronda_24.jpg



Ronda_29.jpg





Notes :
I love this car, I really do !!!

For every GT6 player, this car is a must have :lol: The 1st car that every garage owner should be proud of, the FIT RS is a beginner's car, yet it has great potential when tuned and sounds decent, just don't use stock exhaust :lol:

This 450PP build is based on J's Racing Honda FIT RS track car ( Super Taikyu ). The weight distribution is fixed to replicate real life specification at 62/38, another GT6 mistake :) Fear not, this nose heavy FF is still agile and a rocket on twisty tracks.

For suspension, J's Racing OHLINS Type S coilover is used, with 10kg/mm front and 6kg/mm rear spring rate, the coilover allows -50mm drop on the front and -60mm drop at the rear. With damper tuned for balance and response, this FIT eats corners at Tsukuba with ease.

LSD is 1.5 way with medium preload for good response when traction is needed most, and low locking rate to balance things out.

Transmission uses 6 speed custom close ratio combined with ATS Final Gear at 4.688 :D This gives the FIT awesome acceleration that keeps the engine in sweet power range of the high rpm turbo. Adjust the final if necessary when higher top speed is required.

The car was tuned and tested at Tsukuba, Brands Hatch GP + Indy, Nurb GP/F and Streets of Willow :D
The J's Racing FIT RS 450PP is capable of mid 1:05s lap at Tsukuba on comfort soft. Included below is the replay file of the test lap with the time done on 1st lap :D Take a note of how braking is done on 1st corner, smooth is fast 👍

Don't forget to try this little pocket rocket on sports medium ( R comp semi slick ) to appreciate just how wonderful a FIT can be on the track !!!

ENJOY :cheers:


 

Attachments

  • J'sRacingHondaFITRSTurbo450PPTsukuba1min05s.zip
    261.7 KB · Views: 33
Last edited:
BMW E92 M3 GTS

Tuned to replicate BMW E92 M3 GTS based on M3 Chrome Line
Comfort Soft to Sports Medium




CAR : BMW M3 Coupe Chrome Line
Tire : Comfort Soft to Sports Medium



Specs
Horsepower: 444 HP / 450 PS at 7900 RPM
Torque : 328.8 ft-lb at 5000 RPM
Power Limiter at : 91.0%
Weight: 1530 kg
Ballast : 84 kg
Ballast Position : -5
Weight Distribution : 50 / 50 - real life 50.8/49.2 reflected in ballast position.
Performance Points: 506


GT AUTO
Oil change
Improve Body Rigidity ( INSTALLED ) - OPTIONAL - the real car has chassis reinforcement and track spec roll cage
Aero Kits Type A
Rear Wing : Generic Wing Type C
Wheels : +1 Inch Up - BBS RE-MG in Black Matte / GT6 Matte 008
Car Paint : Monaco Orange


Tuning Parts Installed :
Sports Exhaust
Intake Tuning
Fully Customizable Dog Clutch Transmission
Adjustable LSD
Fully Customizable Suspension
Weigh Reduction Stage 1



Suspension - KW Club Sport M3 GTS Coilover
Front, Rear

Ride Height: 90 82
Spring Rate: 9.07 14.27
Dampers (Compression): 5 5
Dampers (Extension): 4 4
Anti-Roll Bars: 5 3
Camber Angle: 0.2 0.2 ( use alternate zero camber all around for max grip )
Toe Angle: 0.06 0.12

Alternative Damper Setup for various track based/adapted from KW Club Sport Recommended Setup and real life setup :

Winding/Twisty + Bumpy Road ( Nordschleife, Touge etc )
Dampers (Compression): 5 5
Dampers (Extension): 4 4

Track - High Speed Stability ( Nurb GP/F, Willow Springs )
Dampers (Compression): 5 5
Dampers (Extension): 5 6

Track - Loose + Technical Track ( Tsukuba ) -KW Recommended Setup
Dampers (Compression): 5 5
Dampers (Extension): 6 5

Street - Cruise
Dampers (Compression): 2 2
Dampers (Extension): 2 1




LSD - 1.5way
Initial Torque : 20
Acceleration Sensitivity: 30
Braking Sensitivity: 15


DOG CLUTCH TRANSMISSION - Adapted 7 Speed Drivelogic
Set Default
Set Auto Max Speed to 250kmh / 155mph
Adjust each gear :
1st 4.780
2nd 3.056
3rd 2.153
4th 1.678
5th 1.390
6th 1.000 ( the real 6th gear is omitted, 7th gear is used instead to maintain real life top speed )
Set Final Gear : 3.154

If wanted to lower top speed in favour of acceleration, simply replace 6th 1.000 with the real 6th ratio : 1.203


AERO
Rear : 20 ( MAX )


Brake Balance:
8/8 ( personal BB) or for ABS 0 wheel : 6/6, for ABS 1 - feel free to use your preferred brake balance.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 8/8 brake balance as starting point.




Notes :
BMW M3 GTS, with 444HP/450PS, 1530kg. The replica is built upon request, I researched BMW M forums, press releases, car reviews and consulting owners of M3 via forum.

Suspension damper settings are adapted from real life setup and KW recommended setup, use these to your preferences. Try them all, and see which one works best for given track and tire used. Personally I used winding/twisty setup. Improve Body Rigidity is optional, I suggest to install it only when you feel the car is too loose as it makes is a bit more responsive but tighter.

The replica uses comfort soft tires in order to replicate lap time accurately. The M3 GTS managed to lap Nurb GP/F in easily consistent 2:21s just like real life lap time record.

I decided to combine 6th and 7th into one, the replica uses real life 7th for 6th. Please read the notes on gear ratio section for explanation. Shift up from 5th to 6th on redline.

When tested at Nordschleife, the car managed sub 8 minutes with ease on comfort soft tire, so it should be able to replicate real life lap record easily.

Use the brakes to rotate on entry and throttle to steer the car one exit :D I have lots of enjoyment driving this replica, hopefully you will too.

ENJOY :cheers:
BMW E92 M3 GTS

Tuned to replicate BMW E92 M3 GTS based on M3 Coupe '07
Comfort Soft to Sports Medium




CAR : BMW M3 Coupe '07
Tire : Comfort Soft to Sports Medium


Specs
Horsepower: 444 HP / 450 PS at 7800 RPM
Torque : 325.5 ft-lb at 4100 RPM
Power Limiter at : 96.1%
Weight: 1530 kg
Ballast : 58 kg
Ballast Position : -9
Weight Distribution : 50 / 50 - real life 50.8/49.2 reflected in ballast position.
Performance Points: 506


GT AUTO
Oil change
Improve Body Rigidity ( INSTALLED ) - OPTIONAL - the real car has chassis reinforcement and track spec roll cage
Aero Kits Type A
Rear Wing : Generic Wing Type C
Wheels : +1 Inch Up - BBS RE-MG in Black Matte / GT6 Matte 008
Car Paint : Hugger Orange ( from Chevrolet Camaro Z28 '69 Premium )


Tuning Parts Installed :
Sports Exhaust
Isometric Exhaust Manifold
Twin Plate Clutch
Fully Customizable Dog Clutch Transmission
Adjustable LSD
Fully Customizable Suspension
Weigh Reduction Stage 1



Suspension - KW Club Sport M3 GTS Coilover
Front, Rear

Ride Height: 90 82
Spring Rate: 9.07 14.27
Dampers (Compression): 5 5
Dampers (Extension): 4 4
Anti-Roll Bars: 5 3
Camber Angle: 0.2 0.2 ( use alternate zero camber all around for max grip )
Toe Angle: 0.06 0.12

Alternative Damper Setup for various track based/adapted from KW Club Sport Recommended Setup and real life setup :

Winding/Twisty + Bumpy Road ( Nordschleife, Touge etc )
Dampers (Compression): 5 5
Dampers (Extension): 4 4

Track - High Speed Stability ( Nurb GP/F, Willow Springs )
Dampers (Compression): 5 5
Dampers (Extension): 5 6

Track - Loose + Technical Track ( Tsukuba ) -KW Recommended Setup
Dampers (Compression): 5 5
Dampers (Extension): 6 5

Street - Cruise
Dampers (Compression): 2 2
Dampers (Extension): 2 1




LSD - 1.5way
Initial Torque : 20
Acceleration Sensitivity: 30
Braking Sensitivity: 15


DOG CLUTCH TRANSMISSION - Adapted 7 Speed Drivelogic
Set Default
Set Auto Max Speed to 250kmh / 155mph
Adjust each gear :
1st 4.780
2nd 3.056
3rd 2.153
4th 1.678
5th 1.390
6th 1.000 ( the real 6th gear is omitted, 7th gear is used instead to maintain top speed )
Set Final Gear : 3.154

If wanted to lower top speed in favour of acceleration, simply replace 6th 1.000 with the real 6th ratio : 1.203


AERO
Rear : 20 ( MAX )


Brake Balance:
8/8 ( personal BB) or for ABS 0 wheel : 6/6, for ABS 1 - feel free to use your preferred brake balance.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 8/8 brake balance as starting point.





Notes :
BMW M3 GTS, with 444HP/450PS, 1530kg. The replica is built upon request, I researched BMW M forums, press releases, car reviews and consulting owners of M3 via forum.

Suspension damper settings are adapted from real life setup and KW recommended setup, use these to your preferences. Try them all, and see which one works best for given track and tire used. Personally I used winding/twisty setup. Improve Body Rigidity is optional, I suggest to install it only when you feel the car is too loose as it makes is a bit more responsive but tighter.

The replica uses comfort soft tires in order to replicate lap time accurately. The M3 GTS managed to lap Nurb GP/F in easily consistent 2:21s just like real life lap time record.
I decided to combine 6th and 7th into one, the replica uses real life 7th for 6th. Please read the notes on gear ratio section for explanation. Shift up from 5th to 6th on redline.

When tested at Nordschleife, the car managed sub 8 minutes with ease on comfort soft tire, so it should be able to replicate real life lap record easily.
Use the brakes to rotate on entry and throttle to steer the car one exit :D I have lots of enjoyment driving this replica, hopefully you will too.

ENJOY :cheers:
Great cars with the weight lowered. 👍
 
Here is a part of my method to tuning cars in GT6 - this is posted at Stratos Difficult Car thread :

With spring rate set/chosen, time to tune the rest of the suspension ( Deciding the spring rate also can be done in similar method as with damper below - the higher the grip of the tire, the harder the spring, running racing tires with very soft spring is not advisable )

Damper, here is a simple step that I adapted from the method that I did in real world, start off with all at lowest value, this includes compression, extension, ARB, and zero toe as well as camber. Drive the car on the track where you can be consistent and has variety corners to highlight the car's weakness easily. I would suggest to set the LSD to 5/5/5 first.

Now, make changes to rear compression only, change to max at 10, and drive for several laps, make a note of how the car handle, go back and reduce by 2, 8 then 6 then 4 and so on, this will take time, so use shorter track if you prefer. Once you feel the rear has better traction and rides the bumps well, continue to adjusting the rear extension, set it at max, then one click higher than compression, then same as compression and 1/2 click lower. Make a note of each setting handling, choose one which gives better stability under acceleration on mid corner and exits. Also pay attention to how the car rotates when braking and turning. Now onto the front damper, with the rear setup done, do the same on the front compression, make a note of each value, how the car behaved under braking, hitting bumps, changing directions and corner entry grip. Set to the value that gives the best feel. Then do the extension, find one that gives good braking ability, less understeer/push on entry.

Now the damper is done, time for the ARB, as they are set at 1 front and back, the car will have some roll ( depend on the weight, chassis and spring rate strength ). Increase rear to max, and drive the car, notice how the rear has less roll and much more responsive, but usually becomes tight on the limit. Same steps, reduce and drive until you find a value that feels responsive but give the car good rotation. Do the same with front ARB, at max, it should be responsive but very tight when entering mid/high speed, find the spot that balance the response and entry rotation.

For camber, any value above 0.0 will reduce grip, so use that to your advantage, if you have FF car that still lack in rotation for example, use front 0.0 and rear at 0.5 or above - I don't recommend to go above 1.5, as usually it starts to hit cornering speed and the rear loses grip too easily. For the Stratos, if the front tires is too grippy, use 0.2 for a start, I don't recommend higher than 1.0 as it will be detrimental to front tire grip causing understeer and lower cornering speed.

Toe : I usually use real world alignment and there's should be no need to use high value if the spring, damper, ARB and camber sorted out. I never use more than toe in or out of 0.30. For FF car, 0.10 toe out or less is usually enough with neutral rear at 0.00. Use both toe in for Stratos - as IRL, Stratos HF Stradale owners used front toe in and neutral rear or same toe in as front ( 1mm to 2mm ), don't go too high as it will induce understeer, 0.15 to 0.19 toe in is more than enough IMO.
This is like the missing link in the evolution theory. For the first time (afaik), wrote down clearly what can be done, from the very first step. Many, many thanks! :) 👍
 
This is like the missing link in the evolution theory. For the first time (afaik), wrote down clearly what can be done, from the very first step. Many, many thanks! :) 👍

You're welcome :D I tried to be concise and clear at the same time. I am still learning too.

Can't wait for this. Looks like it's been upgraded from an RS with a cvt drone-box :yuck: to a Type R :bowdown:

Wait no more, I have updated the post :) I have also included a replay file for viewing pleasure, I enjoyed watching it :P, the 1st corner braking is epic, and guess what's the driver name ;)

J's Racing Honda FIT RS Turbo '10 450PP

Special build of J's Racing Honda FIT RS Turbo '10 at 450PP
Comfort Soft to Sports Medium




CAR : Honda FIT RS '10
Tire : Comfort Soft to Sports Medium


Specs
Horsepower: 237 HP at 7300 RPM
Torque : 181.2 ft-lb at 6300 RPM
Power Limiter at : 100%
Weight: 930 kg
Ballast : 53 kg
Ballast Position : -43
Weight Distribution : 62 / 38 - as in real life spec
Performance Points: 450

GT AUTO
Oil change
Improve Body Rigidity ( INSTALLED IN THIS BUILD ) - OPTIONAL - the J's Racing FIT has extensive chassis reinforcement and roll cage.
Aero Kits Type A
Rear Wing - Custom Wing Type B
Wheels : Standard Size - RAYS 57Gainer in GT6 Matte 017
Car Paint : GT6 Polarized 016


Tuning Parts Installed :
Engine Tuning Stage 1
Sports Computer
Racing Exhaust
Catalytic Converter Sports
High RPM Range Turbo Kit
Twin Plate Clutch
Fully Customizable Dog Clutch Transmission
Adjustable LSD
Fully Customizable Suspension
Weigh Reduction Stage 3
Carbon Hood ( Body Color )
Window Weight Reduction



Suspension - J's Racing SPL OHLINS TYPE S Coilover Kit ( -50mm/-60mm drop )
Front, Rear

Ride Height: 100 90
Spring Rate: 10.00 6.00
Dampers (Compression): 5 3
Dampers (Extension): 3 4
Anti-Roll Bars: 4 5
Camber Angle: 0.2 1.2 ( use zero camber all around for max grip )
Toe Angle: 0.07 -0.07



LSD - 1.5 way LSD -medium preload
Initial Torque : 18
Acceleration Sensitivity: 20
Braking Sensitivity: 10


DOG CLUTCH TRANSMISSION - 6 Speed Close ratio with ATS Final Gear
Install all power parts
Set Default
Use default Auto Max Speed at 200kmh / 124mph
Adjust each gear :
1st 3.000
2nd 2.175
3rd 1.650
4th 1.325
5th 1.100
6th 0.925
Set Final : 4.688 - ( adjust final according to track if necessary )


AERO
REAR : 20 ( MAX )


Brake Balance:
8/10 ( personal BB) or for ABS 0 wheel : 6/8, for ABS 1 - feel free to use your preferred brake balance. I recommend to run 2 click higher at the rear.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 8/10 brake balance as starting point.




Notes :
I love this car, I really do !!!

For every GT6 player, this car is a must have :lol: The 1st car that every garage owner should be proud of, the FIT RS is a beginner's car, yet it has great potential when tuned and sounds decent, just don't use stock exhaust :lol:

This 450PP build is based on J's Racing Honda FIT RS track car ( Super Taikyu ). The weight distribution is fixed to replicate real life specification at 62/38, another GT6 mistake :) Fear not, this nose heavy FF is still agile and a rocket on twisty tracks.

For suspension, J's Racing OHLINS Type S coilover is used, with 10kg/mm front and 6kg/mm rear spring rate, the coilover allows -50mm drop on the front and -60mm drop at the rear. With damper tuned for balance and response, this FIT eats corners at Tsukuba with ease.

LSD is 1.5 way with medium preload for good response when traction is needed most, and low locking rate to balance things out.

Transmission uses 6 speed custom close ratio combined with ATS Final Gear at 4.688 :D This gives the FIT awesome acceleration that keeps the engine in sweet power range of the high rpm turbo. Adjust the final if necessary when higher top speed is required.

The car was tuned and tested at Tsukuba, Brands Hatch GP + Indy, Nurb GP/F and Streets of Willow :D
The J's Racing FIT RS 450PP is capable of mid 1:05s lap at Tsukuba on comfort soft. Included below is the replay file of the test lap with the time done on 1st lap :D Take a note of how braking is done on 1st corner, smooth is fast 👍

Don't forget to try this little pocket rocket on sports medium ( R comp semi slick ) to appreciate just how wonderful a FIT can be on the track !!!

ENJOY :cheers:


 
You're welcome :D I tried to be concise and clear at the same time. I am still learning too.



Wait no more, I have updated the post :) I have also included a replay file for viewing pleasure, I enjoyed watching it :P, the 1st corner braking is epic, and guess what's the driver name ;)
Awesome :bowdown:. Love how you explain what you've done in your builds 👍. Everyone has a FIT, being the first car in the game so it's really good to have another tune out there. This little bluey is off the charts :cheers:
 
J's Racing Honda FIT RS Turbo '10 450PP

Special build of J's Racing Honda FIT RS '10 at 450PP based on Super Taikyu
Comfort Soft to Sports Medium




CAR : Honda FIT RS '10
Tire : Comfort Soft to Sports Medium


Specs
Horsepower: 237 HP at 7300 RPM
Torque : 181.2 ft-lb at 6300 RPM
Power Limiter at : 100%
Weight: 930 kg
Ballast : 53 kg
Ballast Position : -43
Weight Distribution : 62 / 38 - as in real life spec
Performance Points: 450

GT AUTO
Oil change
Improve Body Rigidity ( INSTALLED IN THIS BUILD ) - OPTIONAL - the J's Racing FIT has extensive chassis reinforcement and roll cage.
Aero Kits Type A
Rear Wing - Custom Wing Type B
Wheels : Standard Size - RAYS 57Gainer in GT6 Matte 017
Car Paint : GT6 Polarized 016


Tuning Parts Installed :
Engine Tuning Stage 1
Sports Computer
Racing Exhaust
Catalytic Converter Sports
High RPM Range Turbo Kit
Twin Plate Clutch
Fully Customizable Dog Clutch Transmission
Adjustable LSD
Fully Customizable Suspension
Weigh Reduction Stage 3
Carbon Hood ( Body Color )
Window Weight Reduction



Suspension - J's Racing SPL OHLINS TYPE S Coilover Kit ( -50mm/-60mm maximum drop )
Front, Rear

Ride Height: 100 90
Spring Rate: 10.00 6.00
Dampers (Compression): 5 3
Dampers (Extension): 3 4
Anti-Roll Bars: 4 5
Camber Angle: 0.2 1.2 ( use zero camber all around for max grip )
Toe Angle: 0.07 -0.07



LSD - 1.5 way LSD -medium preload
Initial Torque : 18
Acceleration Sensitivity: 20
Braking Sensitivity: 10


DOG CLUTCH TRANSMISSION - 6 Speed Close ratio with ATS Final Gear
Install all power parts
Set Default
Use default Auto Max Speed at 200kmh / 124mph
Adjust each gear :
1st 3.000
2nd 2.175
3rd 1.650
4th 1.325
5th 1.100
6th 0.925
Set Final : 4.688 - ( adjust final according to track if necessary )


AERO
REAR : 20 ( MAX )


Brake Balance:
8/10 ( personal BB) or for ABS 0 wheel : 6/8, for ABS 1 - feel free to use your preferred brake balance. I recommend to run 2 click higher at the rear.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 8/10 brake balance as starting point.




Notes :
I love this car, I really do !!!

For every GT6 player, this car is a must have :lol: The 1st car that every garage owner should be proud of, the FIT RS is a beginner's car, yet it has great potential when tuned and sounds decent, just don't use stock exhaust :lol:

This 450PP build is based on J's Racing Honda FIT RS track car ( Super Taikyu ). The weight distribution is fixed to replicate real life specification at 62/38, another GT6 mistake :) Fear not, this nose heavy FF is still agile and a rocket on twisty tracks.

For suspension, J's Racing OHLINS Type S coilover is used, with 10kg/mm front and 6kg/mm rear spring rate, the coilover allows -50mm drop on the front and -60mm drop at the rear. With damper tuned for balance and response, this FIT eats corners at Tsukuba with ease.

LSD is 1.5 way with medium preload for good response when traction is needed most, and low locking rate to balance things out.

Transmission uses 6 speed custom close ratio combined with ATS Final Gear at 4.688 :D This gives the FIT awesome acceleration that keeps the engine in sweet power range of the high rpm turbo. Adjust the final if necessary when higher top speed is required.

The car was tuned and tested at Tsukuba, Brands Hatch GP + Indy, Nurb GP/F and Streets of Willow :D
The J's Racing FIT RS 450PP is capable of mid 1:05s lap at Tsukuba on comfort soft. Included below is the replay file of the test lap with the time done on 1st lap :D Take a note of how braking is done on 1st corner, smooth is fast 👍

Don't forget to try this little pocket rocket on sports medium ( R comp semi slick ) to appreciate just how wonderful a FIT can be on the track !!!

ENJOY :cheers:


Incredibly good! It's on rail. :) 👍
 
Back