Thrustmaster TSS Handbrake Sparco Mod

[Podger]

T300 should be in port 1 with no controller required.. leave t300 in PS4 mode

 

[Racetee]

Can I use my th8a & tss sparco mod+ simultaneously on ps4 or do I need the tm sim hub?

I've tried running them both together on dirt rally 2.0 either plugged into base or into console. Game will only recognise one device.

Even tried using my drive hub but no luck there either.

Any help would be great thanks.

You have to plug TSS into base, while you can plug TH8A directly to USB. No sim hub needed.
Most of the games fully support TH8A running directly from USB. You can find the list here: https://support.thrustmaster.com/en/product/th8a-en/

 

[CLIFFO_83]

You have to plug TSS into base, while you can plug TH8A directly to USB. No sim hub needed.
Most of the games fully support TH8A running directly from USB. You can find the list here: https://support.thrustmaster.com/en/product/th8a-en/

I've tried that but my ps4 only recognises one device for some reason in dirt rally 2.0

I have latest firmware installed on wheel & both shifters

 

[CLIFFO_83]

T300 should be in port 1 with no controller required.. leave t300 in PS4 mode

Thanks Podger that worked mate

 

[cjr3559]

EDIT

Problem was solved. 👍

 

[Racetee]

I've tried that but my ps4 only recognises one device for some reason in dirt rally 2.0

I have latest firmware installed on wheel & both shifters

Then you are doing something wrong. I always use TH8A plugged into USB because I use different key mappings for shifter paddles on the wheel.

What does it mean that "my ps4 only recognises one device"?

 

[CLIFFO_83]

Then you are doing something wrong. I always use TH8A plugged into USB because I use different key mappings for shifter paddles on the wheel.

What does it mean that "my ps4 only recognises one device"?

How can I be doing something wrong?

I've tried th8a via usb & tss via wheel base & vice versa.

Only one device will work at a time.

Only way to get both working alongside each other was to use the drive hub as Podger explained above.

 

[Podger]

I’m sure the sim hub would also do the trick too

 

[CLIFFO_83]

I’m sure the sim hub would also do the trick too

I agree.

I can't explain why both shifters aren't working together when plugged into ps4 and base.

 

[CLIFFO_83]

Then you are doing something wrong. I always use TH8A plugged into USB because I use different key mappings for shifter paddles on the wheel.

What does it mean that "my ps4 only recognises one device"?

It's working now! Not sure what the issue was...Happy day's!

 

[DJ_JIMMY]

Hello guys
does tss work on ps4 without a thrustmaster base?
I have fanatec and this handbrake and I can't get it to run on usb, som
Hello guys
does tss work on ps4 without a thrustmaster base?
I have fanatec and this handbrake and I can't get it to run on usb, somehow?

 

[WildRun]

DJ_JIMMY. On PS4 & Xbox the TSS Handbrake can be only connected to a Thrustmaster base. It can be connected with USB only on PC.

 

[Racetee]

Hello guys
does tss work on ps4 without a thrustmaster base?
I have fanatec and this handbrake and I can't get it to run on usb, som
Hello guys
does tss work on ps4 without a thrustmaster base?
I have fanatec and this handbrake and I can't get it to run on usb, somehow?

You will have to use drivehub in this case.

 

[DJ_JIMMY]

thanks guys,
@Racetee, I have the dd1 podium ps4, th8a and tss, is it compatible with divehub? Will everything work normally? no loss of information? like the load cells or some sencibilidad of the steering wheel?

thx

 

[Racetee]

It will work the same as if you had all Fanatec gear.