- 117
- Spain
Assetto Corsa PC Mods General DiscussionPC
- Thread starter daan
- 140,256 comments
- 38,749,199 views
- 951
- Virgin Islands US
Here's a updated comparison again. This time i went full on Dauer with the design ditching the old goofy kit car ish street legal design in favor for a Dauer replica. Really like how it turned out modeled the steering wheel and the door handles which was easy to model but irritating to place on the body it was a bit hard trying to put on the meshes on the doors. And i had to rebody the window frame a bit. Couldn't get a clear picture of the shifter console here because the interior is too cramped lol i literally had to hide the seats in the interior so the shot could be good.
Still unfinished the interior needs a bit of modeling. Notably the actual Dauer seats (which i can't find a good reference for) and some other misc stuff. The exterior is pretty much finished i think.
Still unfinished the interior needs a bit of modeling. Notably the actual Dauer seats (which i can't find a good reference for) and some other misc stuff. The exterior is pretty much finished i think.
Last edited:
- 16,320
- Melbourne
- ScottPuss20
- CheetahsMeow
Has anyone managed to mod the ACC version of Bathurst into this game?
- 1,277
- United States
- 300
- Brazil
pclipse is back
- 235
- Germany
- 1,362
Really enjoying this conversion. Like @Masscot, I'm seeing the strange "holographic" reflective effect in VR on some of the surfaces around the grandstands, or a more subtle effect when the fencing overlaps something behind it.
Pit Entrance
One thing that could be cleaned up or smoothed, when entering the pit area, just after the line designating the speed-regulated area, there's some sharp or uneven features of the physical surface or mesh that makes it feel like your driving off a sharp curb.
- 460
- Austria
Hi Shi
Thank you very much for this great track. I have experienced some problems with the AI on this track. With GT-vars (GT1, GTE) I have seen some mass collisions directly after race start in turn 1. The AI drives too close to the right track border and then crashes into each other. Even with aggression level turned down to 50%.
I have tried to fix that with as little ai_hints.ini. I didn't wanted to slow down the AI. Especially because this problem does not occur with all cars. So I did just forced the AI to stay away from the track borders in turn 1 (left side: 10%, right side: 20%). It is working so far for all cars I have tested. Maybe you want to give it a try.
Here is the text for the ai_hints.ini in the international layout. But it is working for the endurance layout too:
[DANGER_0]
START=0.03
END=0.06
LEFT=0.1
RIGHT=0.2
- 803
- Italy
I think he means he would like to deactivate the custom rain physics that some cars have by default, the GUE gt4's are the first coming to my mind, right now. They feature rain physics even if "extended physics" is off.
and...
Last edited:
- 709
- Chad
hey all, thought id do a progress update
Ferrari Enzo/FXX/F150
Been messing around with the Enzo and FXX to make the Maserati MC12 Test Mule. The FXX eventually seemed the closest model and least work so ive been working on it and scrapped the Enzo.
Mercedes SLR 722 GT
Koenigsegg CCGT
Porsche Carrera Gt-R
Seat Cupra
Which leads me to the last issue. I counted 24 cars but realised I had included the Radical RXC which is post 2010. Therefore I will do one more car. As there are limited options I have got it down to the following short-list. Any suggestions or anything helps me greatly.
edit - quick mock up. hmmm so not sure.
Ferrari Enzo/FXX/F150
Been messing around with the Enzo and FXX to make the Maserati MC12 Test Mule. The FXX eventually seemed the closest model and least work so ive been working on it and scrapped the Enzo.
- removed rear wing and used correct rear wing from MC12. redone aero profile
- fixed suspension bump stop issues
- moved internal screen so its visible when driving
Mercedes SLR 722 GT
- redone the sunstrip as old one was pixelated and wrong
- added the gills and single gil fin, (pain in the ass to fit and place)
- added fins to the side bonnet too (same as above)
- interior now a lot closer to real car. fixed branding on Furai wheel, resized button box and central motec. shifter lights and lap time now working.
- fixed suspension to stop wheels bumping through bonnet
- rebuilt roll cage as it originally poked through the roof.
- de-smoked windscreen
Koenigsegg CCGT
- replaced steering wheel for correct one
- started skinning
Porsche Carrera Gt-R
- sorted steering wheel size
- found triangular button box
- started skinning
Seat Cupra
- added the button box, air vent and internal screen and mount. think the screen mount looks legit how its positioned with the air vent. will add fire extinguisher and bits and call it a day. if anyone knows which car has a higher quality version of the wheel let me know and ill change it.
Which leads me to the last issue. I counted 24 cars but realised I had included the Radical RXC which is post 2010. Therefore I will do one more car. As there are limited options I have got it down to the following short-list. Any suggestions or anything helps me greatly.
- Alfa 8C GT - Car is good to go in its current state, decent quality so maybe just a little tidy up and balance. But again car is already done so nothing new
- P4/5 GTP - Same as above
- SSC Ultimate Aero - Could be interesting and a decent candidate with the model we already have.
- Morgan Aero 8 Supersports - could be fun, quite a bit of work required though.
- Joss JT1 - cool car and pretty much already done, needs a few bits and bobs. only negative i see is it might be a bit too similar to the Saleen S7 and Mosler.
- TVR Sagaris - i have a thing for TVR's having grown up near their old HQ. could turn out interesting. may do a quick mock up.
- Weisman GT MF5 - could also be interesting. would be a bit of work tho as not sure what to do with all those internal dials.
edit - quick mock up. hmmm so not sure.
Last edited:
- 60
- Netherlands
Hi Man
I see on the site where to download the Mustang also the DTM 2001 mod, so you converted the cars very cool
always loved that mod since F12002
Pack DTM 2001 v1.3 -
Check this, its al your fault lol
Attachments
Last edited:
- 6,738
- The Bunker
Apologies, I hadn't realised you'd done configs for the balloon kn5s already - I saw those BTB balloon models and just assumed they were static type that are often baked into older track models.
There's a whole bunch of reskinned Kunos balloons in this download, just pluck out any you want to use and rename the kn5 to match your models.ini reference.
Balloon Fiesta add-on for almost any track
* If you like any of my resources and feel like contributing, please make a small donation to Cancer Research or your local charity of choice. Thanks! * Note: permission is NOT given for this resource to be used in any paymod, including Patreon...
www.racedepartment.com
I had a quick look at the Michelin bridges to try and 'unsquash' the logo (and Bibendum) but the mapping is a little odd (look at the 'M' on the right hand side) so had mixed success.
original:
tweaked:
- 1,967
- Germany
Watching that video I think now we have reached the level "You need to have a scientist degree to handle AC weather system". Jesus. But he is on preview182 I see, so I wonder when the patreon users will have it as well (I am one of them).
- 803
- Italy
- 6,738
- The Bunker
3D clouds seem to have improved but still don't have the variety of the 2D skyboxes, and still look kind of fake to me. I'm guessing there won't be a 2D cloud option with Pure?
My biggest concern though is Pure's reliance on autoexposure, as it's the first thing I turn off in PP filters. In VR you're constantly moving your view, looking left and right at mirrors, and even over your shoulders at times. With AE active the light levels outside change with head movement as if someone is pissing about with a dimmer switch. Fake AE isn't needed, especially in first person view and especially in VR. Our eyes are superb at doing it properly themselves.
Last edited:
). 
- 120
- Italy
Ohh man!!! We really need these beasts!!!hey all, thought id do a progress update
Ferrari Enzo/FXX/F150
Been messing around with the Enzo and FXX to make the Maserati MC12 Test Mule. The FXX eventually seemed the closest model and least work so ive been working on it and scrapped the Enzo.
debating wether to have the radiator thing hanging underneath the wing like in the actual car. may be too much of an eye sore tho.
- removed rear wing and used correct rear wing from MC12. redone aero profile
- fixed suspension bump stop issues
- moved internal screen so its visible when driving
Mercedes SLR 722 GT
Was thinking of cutting the bonnet vents to make them bigger and add some fins as in the proper car. seems to be a lot of fiddly work so ill see.
- redone the sunstrip as old one was pixelated and wrong
- added the gills and single gil fin, (pain in the ass to fit and place)
- added fins to the side bonnet too (same as above)
- interior now a lot closer to real car. fixed branding on Furai wheel, resized button box and central motec. shifter lights and lap time now working.
- fixed suspension to stop wheels bumping through bonnet
- rebuilt roll cage as it originally poked through the roof.
- de-smoked windscreen
Koenigsegg CCGT
just needs balancing now as its way too quick
- replaced steering wheel for correct one
- started skinning
Porsche Carrera Gt-R
Just need to add a fire extinguisher and some ancillaries and it will be done on visual side.
- sorted steering wheel size
- found triangular button box
- started skinning
Seat Cupra
- added the button box, air vent and internal screen and mount. think the screen mount looks legit how its positioned with the air vent. will add fire extinguisher and bits and call it a day. if anyone knows which car has a higher quality version of the wheel let me know and ill change it.
Which leads me to the last issue. I counted 24 cars but realised I had included the Radical RXC which is post 2010. Therefore I will do one more car. As there are limited options I have got it down to the following short-list. Any suggestions or anything helps me greatly.
- Alfa 8C GT - Car is good to go in its current state, decent quality so maybe just a little tidy up and balance. But again car is already done so nothing new
- P4/5 GTP - Same as above
- SSC Ultimate Aero - Could be interesting and a decent candidate with the model we already have.
- Morgan Aero 8 Supersports - could be fun, quite a bit of work required though.
- Joss JT1 - cool car and pretty much already done, needs a few bits and bobs. only negative i see is it might be a bit too similar to the Saleen S7 and Mosler.
- TVR Sagaris - i have a thing for TVR's having grown up near their old HQ. could turn out interesting. may do a quick mock up.
- Weisman GT MF5 - could also be interesting. would be a bit of work tho as not sure what to do with all those internal dials.
edit - quick mock up. hmmm so not sure.
Last edited by a moderator:
- 522
- Japan
Thank you. I'll trade you a new balloon.Apologies, I hadn't realised you'd done configs for the balloon kn5s already - I saw those BTB balloon models and just assumed they were static type that are often baked into older track models.
There's a whole bunch of reskinned Kunos balloons in this download, just pluck out any you want to use and rename the kn5 to match your models.ini reference.
Balloon Fiesta add-on for almost any track
* If you like any of my resources and feel like contributing, please make a small donation to Cancer Research or your local charity of choice. Thanks! * Note: permission is NOT given for this resource to be used in any paymod, including Patreon...
I had a quick look at the Michelin bridges to try and 'unsquash' the logo (and Bibendum) but the mapping is a little odd (look at the 'M' on the right hand side) so had mixed success.
original:
View attachment 1099733
tweaked:
View attachment 1099734
I fixed the mapping, can you send me the texture?
Thanks for checking it out. I fixed it.
Thanks for giving me the reference values. ai_hints.ini has been added.
- 435
- United Kingdom
Ll
Have a look at my Abu Dhabi F1 track file data folder. Also the camera_facing.ini attached
Note - sometimes it wont work for all tracks and can cause a crash - COTA is one that works for me but others have said it crashes their setup
Hope that helps
Example;
[CAMERA_FACING_0] ;increase by 1 for each stand selection
SURFACE=obj-paddock-b01 ;enter copied material name here
ELEMENTS=10000 ;reduce or increase as required for amount of spectators
SIZE=0.8,1.4 ;Keep this for sitting spectators
TEXTURE=content/texture/people_sit.dds
TEXTURE_ROWS=3 ;Keep this for sitting spectators
TEXTURE_COLUMNS=7 ;Keep this for sitting spectators
SHADED=1 ;Leave as is
DIFFUSE=0.025,0.025,0.025 ;Leave as is
AMBIENT=0.085,0.085,0.085 ;Leave as is
[CAMERA_FACING_1]
SURFACE=obj-tribun-i20
ELEMENTS=1000
SIZE=0.7,1.9
TEXTURE=content/texture/people_stand.dds
TEXTURE_ROWS=2
TEXTURE_COLUMNS=11
SHADED=1
DIFFUSE=0.025,0.025,0.025
AMBIENT=0.085,0.085,0.085
Hi @Breathe
Have a look at my Abu Dhabi F1 track file data folder. Also the camera_facing.ini attached
- You need to open object inspector on the track you want to add the crowd to
- then alt click the object - usually the seats in the stands
- copy the 'material' name then paste into the 'surface' name
- choose sitting or standing then copy rest of entry as below
Note - sometimes it wont work for all tracks and can cause a crash - COTA is one that works for me but others have said it crashes their setup
Hope that helps
Example;
[CAMERA_FACING_0] ;increase by 1 for each stand selection
SURFACE=obj-paddock-b01 ;enter copied material name here
ELEMENTS=10000 ;reduce or increase as required for amount of spectators
SIZE=0.8,1.4 ;Keep this for sitting spectators
TEXTURE=content/texture/people_sit.dds
TEXTURE_ROWS=3 ;Keep this for sitting spectators
TEXTURE_COLUMNS=7 ;Keep this for sitting spectators
SHADED=1 ;Leave as is
DIFFUSE=0.025,0.025,0.025 ;Leave as is
AMBIENT=0.085,0.085,0.085 ;Leave as is
[CAMERA_FACING_1]
SURFACE=obj-tribun-i20
ELEMENTS=1000
SIZE=0.7,1.9
TEXTURE=content/texture/people_stand.dds
TEXTURE_ROWS=2
TEXTURE_COLUMNS=11
SHADED=1
DIFFUSE=0.025,0.025,0.025
AMBIENT=0.085,0.085,0.085
Attachments
Last edited:
I can't wait to drive all those rocket shipshey all, thought id do a progress update
Ferrari Enzo/FXX/F150
Been messing around with the Enzo and FXX to make the Maserati MC12 Test Mule. The FXX eventually seemed the closest model and least work so ive been working on it and scrapped the Enzo.
debating wether to have the radiator thing hanging underneath the wing like in the actual car. may be too much of an eye sore tho.
- removed rear wing and used correct rear wing from MC12. redone aero profile
- fixed suspension bump stop issues
- moved internal screen so its visible when driving
Mercedes SLR 722 GT
Was thinking of cutting the bonnet vents to make them bigger and add some fins as in the proper car. seems to be a lot of fiddly work so ill see.
- redone the sunstrip as old one was pixelated and wrong
- added the gills and single gil fin, (pain in the ass to fit and place)
- added fins to the side bonnet too (same as above)
- interior now a lot closer to real car. fixed branding on Furai wheel, resized button box and central motec. shifter lights and lap time now working.
- fixed suspension to stop wheels bumping through bonnet
- rebuilt roll cage as it originally poked through the roof.
- de-smoked windscreen
Koenigsegg CCGT
just needs balancing now as its way too quick
- replaced steering wheel for correct one
- started skinning
Porsche Carrera Gt-R
Just need to add a fire extinguisher and some ancillaries and it will be done on visual side.
- sorted steering wheel size
- found triangular button box
- started skinning
Seat Cupra
- added the button box, air vent and internal screen and mount. think the screen mount looks legit how its positioned with the air vent. will add fire extinguisher and bits and call it a day. if anyone knows which car has a higher quality version of the wheel let me know and ill change it.
Which leads me to the last issue. I counted 24 cars but realised I had included the Radical RXC which is post 2010. Therefore I will do one more car. As there are limited options I have got it down to the following short-list. Any suggestions or anything helps me greatly.
- Alfa 8C GT - Car is good to go in its current state, decent quality so maybe just a little tidy up and balance. But again car is already done so nothing new
- P4/5 GTP - Same as above
- SSC Ultimate Aero - Could be interesting and a decent candidate with the model we already have.
- Morgan Aero 8 Supersports - could be fun, quite a bit of work required though.
- Joss JT1 - cool car and pretty much already done, needs a few bits and bobs. only negative i see is it might be a bit too similar to the Saleen S7 and Mosler.
- TVR Sagaris - i have a thing for TVR's having grown up near their old HQ. could turn out interesting. may do a quick mock up.
- Weisman GT MF5 - could also be interesting. would be a bit of work tho as not sure what to do with all those internal dials.
edit - quick mock up. hmmm so not sure.
I'd love to see the Morgan as there are not that many non-street Morgans around sadly
- 1,277
- United States
I'm with you on my hope that Pure will still allow for turning AE off. In my little bit of time fooling around with it, I created a filter where I set the max\min AE numbers to the same value and that seems to keep the exposure from changing constantly even with AE on. So it kind of works like having AE off. I haven't tested it enough to see how that effects different lighting situations though. It might cause night time or cloudy situations to be too bright since the exposure isn't changing like Peter is wanting it to do.
- 39
- France
Thx for replies guys ! and yes ninezeroniner you are right, I want to get rid of the rain physics for the GUE gt4's. it's really annoying.
No one knows how ?
- 6,738
- The Bunker
Here's the DDS. I increased the resolution and redid the Michelin logos again.
lagmichelin.dds
1 file sent via WeTransfer, the simplest way to send your files around the world
Forward route is OK, slight mismatch on the second 'M' but your new mapping should resolve that
The mapping on the other side of the bridge needs tweaking, the logos repeat/overlap at the bottom ('MICHELINE'). Only really visible in replays or in mirrors unless you do reverse routes, although the reverse sides of the bridges can be seen when driving other parts of the track.
Similar threads
