Assetto Corsa PC Mods General DiscussionPC

[racinjoe013]

Yeah, but very little:

View attachment 1145183

Thanks for the quick check. It's weird, after reading your reply I downloaded the track again and tested it completely stock and I still didn't get those lights. Same thing on Deutschlandring. Not sure why I have no lights in those areas even using the stock tracks. I have lights everywhere else on those tracks. Guess I got some investigating to do.

EDIT: Any chance I could get a copy of your ext_config for Fonteny and Deutschlandring. I see what the problem is. The stock ext_configs that come with the tracks don't have entries for some of the buildings around the pit area for some reason (at least on my computer they don't). I need a working one so I know what to add. Thanks...

 

[ludwig6666]

for those who play in VR -> --- it works! I got about 20% increase in FPS in VR

 

[sab001]

Can someone test something for me who hasn't modded this track. On Fonteny, are there supposed to be lights in and around the front stretch at night? Things like the pit area, hotel, etc. I have no lights in that area and am trying to figure out if it's the modifications I made that's causing it. Thanks. I'd check myself, but I don't have the original ext_config anymore.

No lights at all on the straight with the configs I'm using. These configs seem only to be working with grassFX though, no lighting. I see fonteny.ini (in /loaded) does some light stuff, but is being excluded by ext_config.ini.

 

[racinjoe013]

No lights at all on the straight with the configs I'm using. These configs seem only to be working with grassFX though, no lighting. I see fonteny.ini (in /loaded) does some light stuff, but is being excluded by ext_config.ini.

Good to hear someone else is seeing what i'm seeing. I went ahead and made some new light series entries for both tracks to get some lights back on the pit areas as well as a few other spots around the track. Going to have to update my RD resources for these two tracks to include the extra lights.

Give me a few minutes and i'll post what I did for the stock tracks. These won't include all of the seasonal stuff and grassfx changes I made for my RD resources. Those will have to wait until I get time to put the packages together.

EDIT: People can try these if they want until I have time to update my RD resources for these two tracks. Lights added around pit areas for both Fonteny and Deutschlandring. Also added hints of light around the houses and farms along the track. Looked too much like no one was home all the time. Make sure to backup any existing ext_configs.

EDIT2: Updated RD resources to include the added lights for anyone who used my seasonal adjustment version of these two tracks.

 

[racer357900]

@bastoner97

Hi !

Some 1400 pages ago, a "reworked" one by @Apexxer was available but he decided to delete all his links.
Let me some few minutes to upload it here.

You have to know the helmet position in replay with last CSP versions makes the driver, sometimes, in some necessity to optimize as hell the aerodynamic... You will able to see it with the picture ! ^^
I think the last thing is an issue which could be corrected easily by some brains here.



Cheers !

McLaren MP4-13 by Virtua Simulazioni (Reworks by Apexxer in Version 1.3)
Link : https://mega.nz/file/vbA0GKjA#lCAb6TIkj4MQJYiEOBdaqtry8wlHr-DcZiwTaXH0fU0


This link will be only available for a week (or less if somebody will ask for deleting it).

how can i refind this liens for the new physic of mp4 13 by Apexxer please some could help ? thanks

 

[JV82]

does anyone know how to fix the blurry blue that smudges all over the track please?

It's Miami v1.3 View attachment 1145142

No problem for me with latest version of Miami.
Can it be a photo filter problem? I use filters by Sol or Climax.
Seems you have not much contrast and very bright.

 

[MeltFire]

sadly i did reinstall this 2.53 , still same issue ?

Did u get it to work ?

Yes it working fine for me (beside the constant reminder to update again)

First I uninstall Simplygon 9.2.7000.0, after restarting my computer I deleted the entire Simplygon folders from my C: hard drive before reinstalling 9.2.5300.0 (free license, all default settings)

A word of caution, if you keep installing and reinstalling Simplygon multiple times in one day you'll get a 48-hour timeout before installing again. (of course I learn that the hard way.)

 

[DaWallace]

After the GT2 physics update plus new cars (it's a bit more work then expected...), we will drop something free in between soon

 

[StoffelWaffle]

After the GT2 physics update plus new cars (it's a bit more work then expected...), we will drop something free in between soon

View attachment 1145283View attachment 1145284View attachment 1145285

A car that URD has already made ?

 

[Gregz0r]

more interested for conversion from AMS2 old tracks style Spa 93, Monza 91, Hockenheim 01 and lot off other old f1 track... :=)

The AMS1 tracks that also made it into AMS2 have been conververted by @Zwiss - Adelaide 1988, Jacarepagua 1988, Imola 1988, Hockenheim 1998 & 2001, Spielberg(Osterreichring) 1976. I’m sure Interlagos 1976 was also converted, but I’m not sure by whom.

The classic-era tracks that are only in AMS2, haven’t been converted(Montreal 1988, Spa 1993, Silverstone 1976, 1991 & 2001, Monza 1991) yet, like most Madness Engine tracks.

But, Bannochbrae from PC1 has been successfully converted, so it can be done.

We really need Silverstone 1991 and 2001 to make the transition. I’ve yet to see any historical version of Silverstone that’s in decent quality.

 

[Berganzio]

Aren't the Automobilista 1988 conversions better anyway? Just asking.

Can you post a link to some sort of archive?

 

[CrisT86]

Good to hear someone else is seeing what i'm seeing. I went ahead and made some new light series entries for both tracks to get some lights back on the pit areas as well as a few other spots around the track. Going to have to update my RD resources for these two tracks to include the extra lights.

Give me a few minutes and i'll post what I did for the stock tracks. These won't include all of the seasonal stuff and grassfx changes I made for my RD resources. Those will have to wait until I get time to put the packages together.

EDIT: People can try these if they want until I have time to update my RD resources for these two tracks. Lights added around pit areas for both Fonteny and Deutschlandring. Also added hints of light around the houses and farms along the track. Looked too much like no one was home all the time. Make sure to backup any existing ext_configs.

EDIT2: Updated RD resources to include the added lights for anyone who used my seasonal adjustment version of these two tracks.

About fonteny which is basically almost done from scratch (as you can see in few posts back), if you allow me i will put together your work with mine, so we will have a full-2022-final-update for it, if not i will release mine as always in a separate update

 

[Fanapryde]

.../...Any chance I could get a copy of your ext_config for Fonteny and Deutschlandring.../...

Attached Fonteny.
I have no extension present in the Deutschlandring folder.

 

[DavidDGA]

You maniac! You beat me to it! Damn you. God damn you all to hell!!!

Well... Would be a shame to let the work I'd put into it already go to waste, right? So I finished up my version and uploaded it on RD, too.

Haha! Good work with these ones, it has details that I missed or I couldn't find. In fact seeing your skins I found out an error on mines, so thank you!

Also, I wanted to make the museum too and you released it first, so I think we are in a tie now

Nice to see the What i want V12 LMR in, all that's left is the Audi's (2000 and 2001 and a from the other years), 2001 LM+ALMS and 2000 ALMS Cadillac's and a few of the Panozs.
(look in racingsportscar to see which are missing)

Maybe your wishes will come true in the near future

 

[VR Sim Racer]

for those who play in VR -> --- it works! I got about 20% increase in FPS in VR

Have you done this in AC?
Does it work with Content Manager?

 

[TabsGaming42]

Yeah but I don't feel it's moral for me to give it for a conversion.

If anything you should support @TabsGaming42 patreon for the work he is doing by applying the AO so that the model looks better

No prob !

 

[Greg_ST]

Mitsubishi GTO-LM
DELETE THE OLD ONE FIRST

Spoiler: INFO

A new version of the Mitsubishi GTO-LM
New AO map
New interion+steering wheel
Added wipers+ready for the rain
New wheels, tires, rims
Added glass stickers
Exterior body changes
New aero Some other micro fixes
Added Some visuals, suspension, and more
No real car sound, you can use your own if you want
More changes & fixes in the future
Download it for free:Patreon

 

[Raphael87]

for those who play in VR -> --- it works! I got about 20% increase in FPS in VR

but reshade vr or vrtoolkit doesnt work with open composite, so for me, its a big no, reshade is very important in vr.

 

[JV82]

Hi! How many car mods are there (pay or free) for Formula E?
I know only VRC and ACFL.
Thanks.

 

[El Locho]

@lorelord I checked the wiper of the Ultima in AMS1 and AMS2 (might not be 100% the same car but the wipers are), both use the same setup as your mod. So here's a first version of the wiper config: https://www.mediafire.com/file/wxe2npg2bl8upw6/tmw_ultima_gtr_gt2.ini/file

Spoiler: AMS1

Spoiler: AMS2

Another thing I noticed is that the dash displays the speed in mph but the dashboard says "KM/h" (kph).

 

[kakauiyt]

Hi! How many car mods are there (pay or free) for Formula E?
I know only VRC and ACFL.
Thanks.

that's all, there's also a GEN 1 Formula E car, but I don't know how to find it, it was a simple modder on race department

 

[Camill08]

Yes, Legion's Morgan is a great mod, but it has thin tires. I've seen vintage models in person.

I actually have a set of build plans for the Tri-Magnum (somewhere). There is a newer hybrid XR3 by the same designer.

Maybe I could model it and set it up for AC, then I could send the panel files to someone with a huge "industrial" 3D printer. I know a guy that actually has one of those printers in his garage, and it can be used to print wide-body kits.

what about this Morgan: https://acstuff.ru/f/d/8-morgan-3-wheeler-v0-9-8

 

[racinjoe013]

About fonteny which is basically almost done from scratch (as you can see in few posts back), if you allow me i will put together your work with mine, so we will have a full-2022-final-update for it, if not i will release mine as always in a separate update

That would be great. You can use any part of my update to include with yours. If anything we did overlaps, use whichever one you think looks\works best. All I care about is getting the best looking track.

 

[Fanapryde]

what about this Morgan: https://acstuff.ru/f/d/8-morgan-3-wheeler-v0-9-8

Idk if it has had changes by now, but when I tried it a couple of years ago (before Legion updated it), AI couldn't handle the car.
Legion's version is basically the same car, but AI works.

 

[Paulo Ribeiro]

The GEN 1 Formula E, only has one skin.
If someone wants to make a simple few more, I can provide the car.

 

[Berganzio]

Mitsubishi GTO-LM
DELETE THE OLD ONE FIRST
View attachment 1145420

Spoiler: INFO

A new version of the Mitsubishi GTO-LM
New AO map
New interion+steering wheel
Added wipers+ready for the rain
New wheels, tires, rims
Added glass stickers
Exterior body changes
New aero Some other micro fixes
Added Some visuals, suspension, and more
No real car sound, you can use your own if you want
More changes & fixes in the future
Download it for free:Patreon

I tried the car with gt1 Grid, well the car outperformed the others by 10 second PER LAP at 100% Ai...the second and third were two 911 gt1 97'.
Are the new tires just visually different? If so, it needs a good physics check up

 

[lorelord]

@lorelord I checked the wiper of the Ultima in AMS1 and AMS2 (might not be 100% the same car but the wipers are), both use the same setup as your mod. So here's a first version of the wiper config: https://www.mediafire.com/file/wxe2npg2bl8upw6/tmw_ultima_gtr_gt2.ini/file

Spoiler: AMS1

View attachment 1145423

Spoiler: AMS2

View attachment 1145422

Another thing I noticed is that the dash displays the speed in mph but the dashboard says "KM/h" (kph).
View attachment 1145434

Cheers man, Ill add a second internal windscreen to fix the raindrop issue and change the KMH to MPH on the Digital Dash. Ill include your windscreen wiper config and credit you.

 

[Masscot]

Yes it working fine for me (beside the constant reminder to update again)

First I uninstall Simplygon 9.2.7000.0, after restarting my computer I deleted the entire Simplygon folders from my C: hard drive before reinstalling 9.2.5300.0 (free license, all default settings)

A word of caution, if you keep installing and reinstalling Simplygon multiple times in one day you'll get a 48-hour timeout before installing again. (of course I learn that the hard way.)

I did all of that, registered for the free licence again, and still get the 'Index was outside the bounds of the array' error.
Very weird.
Shame - it's a useful tool.

@benbaron - did you manage to get it working?

 

[kakauiyt]

The GEN 1 Formula E, only has one skin.
If someone wants to make a simple few more, I can provide the car.

there is a skin pack actually for that car, lemme find it

 

[Greg_ST]

I tried the car with gt1 Grid, well the car outperformed the others by 10 second PER LAP at 100% Ai...the second and third were two 911 gt1 97'.
Are the new tires just visually different? If so, it needs a good physics check up

Yea maybe I didn't check the AI data. about physics, I don't know too much I'm just a graphic designer. what do you suggest to be changed?