- 509
- Canada
Assetto Corsa PC Mods General DiscussionPC
- Thread starter daan
- 138,790 comments
- 37,971,296 views
- 1,362
There's one that can be found on the page below. It's pretty good--not sure if it's the same.
https://tm-modding.eu/download-category/assetto-corsa-track-mods/
Last edited by a moderator:
- 2,180
- Helsinki
new engine.ini file attached.I deleted the data folder and use the acd. It's constantly effing up the engine it says.
Just me or gonna be fixed?
This (Mazda)is the best of the models released in terms of sound and handling.
The others need serious work... IMHO they are undriveable in terms of physics.
I cant say, as other projects are in w.i.p.
The AI was mostly made for the cams, it is a test track!
For proper AI to work the sides*.csv need to be created for each layout. If someone wishes to make new AI, that will be great, wouldn't it?
Last edited:
- 309
- Indonesia
Last edited by a moderator:
- 96
- Poland
- 96
- Poland
- 2,180
- Helsinki
yes, the Audi and Lola. I cant say exactly (well the Lola needs rpm adjust too).
But the Mazda is a good drive, proper feel and nice to PUSH. The other 2... snap and fuss, bounce and makes you want to get out and drive something else. Whatever you did to the Mazda (suspension and aero balance)... do that for the rest and then adjust for individuality. I havent tested fully but the Mazda feels like the downforce is a little high still at the lowest settings, but the aero balance feels proper. You should use the Aero app while driving for more insight.
- 6,684
- The Bunker
Further to @GzeroD's tip, if some idiot encrypts the mod with the face and helmet still visible and you're therefore blocked from editing the data file, put this in an extension/ext_config.ini
;to hide driver face/helmet on encrypted mods
[DRIVER3D_HIDE_OBJECT_0]
NAME=DRIVER:HELMET
[DRIVER3D_HIDE_OBJECT_1]
NAME=DRIVER:GEO_Driver_FACE
(thanks to AlleyViper for the tip)
- 96
- Poland
I do use aero app. ACR Pugeot 908/VRC B1 is considered to be accurate in terms of aero physics?
- 908 produces 2700 kg of downforce at 330 kmh, default setup
- VRC B1: <1900kg at 325kmh
- 2016 TS050 posted here: 1725kg/328kmh
- kunos R18: 1650/322
- My Lola Rebellion: 1850/330...
http://www.mulsannescorner.com/aerodatabasegenericLMP2.html
...ok i will look into that.
edit: can You look into Lolas engine to tell me whats wrong?
Last edited:
- 6,684
- The Bunker
Any chance of releasing this as a new car for side-by-side comparison purposes? I did some visual tweaks to the original that I'm keen to hang on to as well.
Last edited:
- 30
- Roma, ITALY
- 6,684
- The Bunker
Not a fan of that Kei truck (although the needles painted on the dials raised a chuckle) but that AMG GT-R certainly deserves a grip tune.
Last edited:
- 1,910
- Germany
@gunnar333 will release a completely scratch made track, I think it is one of the most ambitious projects available for AC. The one from TMM is not the same, no.
- 359
- verona
I've had this happen to me too, and frankly I'm not happy about spending €50 on the update.
Smurth
Premium
- 128
- France
« To disable Fault Tolerant Heap entirely on a system, set the REG_DWORD value HKLM\Software\Microsoft\FTH\Enabled to 0. »
Source : https://docs.microsoft.com/en-us/windows/win32/win7appqual/fault-tolerant-heap
- 92
- Germany
Yes. This will be a complete scratch build and that's why it takes its time.
There is this version from TMM wich seams to be a conversion from rF1 -> rF2 -> AC, but it's not very exact. There are some turns that are quite different in RL.
We do have Sachsenring in MotoGP games and in raceroom.
I played the raceroom version and it's great. The track layout looks like the one from about 2015. There were changes after it which will be in my version.
ATM I'm finishing all the guardrails with exit markings, etc... and I can tell you this track has a lot of them.
My goal is to do a first class mod. Every detail should be as precise as possible. With all CSP features we do have. (rainfx, grassfx, lights, digital flags, animations, seasons, spectators, sounds, etc...)
Also different skins and layouts.
Hi . Great cars but auto gearbox doesn't work also steering is notchy in straight line. But great start.
- 235
- France
I'm using this Anglesey track for some time.
https://www.racedepartment.com/threads/anglesey-circuit-trac-môn-wet-weather.117990/
Its great but there is a problem with the pits.When i start an event like track day.It always spawns me on the pit exit and when the first ai drives out it crashes in to me.Is there any fix?Thanks
Here is a fixed version for pit issue
https://we.tl/t-HrbsmwyNaw
I'm not the author, all credits goes to http://tyronehesbrook.com/
- 4
- Czech Republic
Thank you for the fixes. The cars are working fine now
Last edited:
- 2,157
- Australia
- 6,684
- The Bunker
From FB (Assetto Corsa Mod Central?): Porsche Beck 904 by Mac Ten
Mac Ten
After a long wait it is finally here...
Chuck Beck is renowned among Porsche enthusiasts for his 550 Spyder replicas. They began producing replicas of this famous car in 1998. Since that time, Beck also jointly-developed the Shogun concept car, and produced a competitive race car with his replica of the Lister.
Chuck's latest production car is the Beck 904 replica. This replica is based upon the car that was originally produced by Porsche as a dual-purpose street/race car and marketed under the name Carrera GTS beginning in 1963. Porsche only produced about 100 of these cars in order to satisfy the GT homologation requirements for racing.
This car was unique for Porsche since it was their first car which utilized a body fabricated wholly from fiberglass. This resulted in a very lightweight and aerodynamic body, which in combination with its powerful mid-chassis mounted engine, produced a highly-successful race car. The beauty of the Carrera GTS body, its racing heritage, extreme power to weight ratio, and the fact that it was the only dual purpose street/race car produced by Porsche, makes it highly desirable.
In reverence to the original, Chuck Beck has designed, built and is now producing his replica of the 904. Based upon his long history of racing and experience in building and modifying cars, Chuck has created a replica with improvements that the designers could only dream about in 1963.
This version of the Beck 904 is equipped with a 1974 911 RSR spec flat six engine. With 400 hp at 8,000 rpm, thanks to dual ignition and larger valves and cylinders and, open headers. The chassis uses adjustable coil over shocks and, Porsche 917 brakes.
A Special thanks to my fellow test driver and, actual Porsche 911 owner and race driver form the land of Oz Tony D'Andrea. For the hours of testing that went into this. Much appreciated brother !
Download
https://mega.nz/file/1DBH1aLJ#fUKlyCh_P5qvdCb1-tg5Elb0PvEqV6ztvy8siqoBJHU
Extra tire textures
https://mega.nz/file/0CZlkABR#OJhDUODCJu7OxuEumnsG2jC6JctYCxA2viCDg0I8SwQ
Template
https://mega.nz/file/Fb4kwBYI#-KI3i-bFayO4ANUrHZI_77fqiNIC-7OoblK8fv3Xhuc
Mac Ten
After a long wait it is finally here...
Chuck Beck is renowned among Porsche enthusiasts for his 550 Spyder replicas. They began producing replicas of this famous car in 1998. Since that time, Beck also jointly-developed the Shogun concept car, and produced a competitive race car with his replica of the Lister.
Chuck's latest production car is the Beck 904 replica. This replica is based upon the car that was originally produced by Porsche as a dual-purpose street/race car and marketed under the name Carrera GTS beginning in 1963. Porsche only produced about 100 of these cars in order to satisfy the GT homologation requirements for racing.
This car was unique for Porsche since it was their first car which utilized a body fabricated wholly from fiberglass. This resulted in a very lightweight and aerodynamic body, which in combination with its powerful mid-chassis mounted engine, produced a highly-successful race car. The beauty of the Carrera GTS body, its racing heritage, extreme power to weight ratio, and the fact that it was the only dual purpose street/race car produced by Porsche, makes it highly desirable.
In reverence to the original, Chuck Beck has designed, built and is now producing his replica of the 904. Based upon his long history of racing and experience in building and modifying cars, Chuck has created a replica with improvements that the designers could only dream about in 1963.
This version of the Beck 904 is equipped with a 1974 911 RSR spec flat six engine. With 400 hp at 8,000 rpm, thanks to dual ignition and larger valves and cylinders and, open headers. The chassis uses adjustable coil over shocks and, Porsche 917 brakes.
A Special thanks to my fellow test driver and, actual Porsche 911 owner and race driver form the land of Oz Tony D'Andrea. For the hours of testing that went into this. Much appreciated brother !
Download
https://mega.nz/file/1DBH1aLJ#fUKlyCh_P5qvdCb1-tg5Elb0PvEqV6ztvy8siqoBJHU
Extra tire textures
https://mega.nz/file/0CZlkABR#OJhDUODCJu7OxuEumnsG2jC6JctYCxA2viCDg0I8SwQ
Template
https://mega.nz/file/Fb4kwBYI#-KI3i-bFayO4ANUrHZI_77fqiNIC-7OoblK8fv3Xhuc
Last edited:
- 16
- Germany
someone want to work on the car . i cant do the 3d work fast and efficient. the doorhandles front lights and bumper need some love. (*edit also airintake on the rearside).. i have done that : the car has 70mm more wheelbase 20 in the front 50 in the back. frontlights 25mm more outside each side. back is 50mm wider each side. doors 30mm more outside each side. new mirrors, rearwing, steeringwheel,
Attachments
Last edited:
- 259
- Turkey
here is the new jaguar suv
joking aside, it happens when you use artificial intelligence. Normal when I use it myself
- 5,552
- Belgium
Thanks.
A tip: better change the folder name to mazda_furai_tweaked (not Tweaked). With the capital letter T, CM will not record speed and driven distance.
Can you start the download? I tried it yesterday, and I got a message saying that the dl might not work, but I tried and it worked
Similar threads
