Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 149,484 comments
  • 45,242,069 views
ferrari 296 gt3 skins by FSR


install: unzip and drag the content folder to CM


i haven't made any of these skins all i have done here is rename the skin so they would go onto the FSR version as Chemflummi and FSR are both ripped from ACC (i think) or whatever game its irrelevant really.

photo just to show the amount more than anything

fsr version was lacking skins........its not now

car can be found by a search but i promise you 1 thing...........you will not find it on addonhub..........no sir!

lots of skins for ferrari 296 gt3 by FSR

install: unzip and drag the content folder to CM i haven't made any of these skins all i have done here is rename the skin so they would go onto the FSR version as Chemflummi and FSR are both ripped from ACC (i think) or whatever game its...
www.gtplanet.net www.gtplanet.net

Screenshot (507).png
 
Last edited:
maximeerkat
ferrari 296 gt3 skins by FSR


install: unzip and drag the content folder to CM


i haven't made any of these skins all i have done here is rename the skin so they would go onto the FSR version as Chemflummi and FSR are both ripped from rf2 (i think) or whatever game its irrelevant really.

photo just to show the amount more than anything

fsr version was lacking skins........its not now

car can be found by a search but i promise you 1 thing...........you will not find it on addonhub..........no sir!

lots of skins for ferrari 296 gt3 by FSR

install: unzip and drag the content folder to CM i haven't made any of these skins all i have done here is rename the skin so they would go onto the FSR version as Chemflummi and FSR are both ripped from ACC (i think) or whatever game its...
www.gtplanet.net www.gtplanet.net

View attachment 1333113
Click to expand...
I'm confused. The folder structure says it is ks car, but is it actually a Kunos car?
 
Last edited:
Moor1804
I can't activate it; I press the clutch and engage the gear, but the sequential gearbox still remains...am I doing something wrong?
Click to expand...
Works for me in most cars, but not for the (CSP versions) VRC BTCC cars.
So, if you want these to act with manual gearbox, you need to unpack data.acd, open drivetrain.ini and find [GEARBOX]
Change SUPPORTS_SHIFTER=0 to 1.
Then either repack data, or check the use unpacked data if exists in the CM DRIVE tab.
But (I read the part where the ui says 6-speed manual transmission) the car has a sequential stick sifter which is animated as sequential...
 
Last edited:
racinjoe013
So if they are both rips fro the same source, which is considered better and how do they differ?
Click to expand...
the one from FSR just has ripped physics from a kunos car and different sound e.t.c while i would imagine chem's has not got ripped physics (i cant check as i dont have it now). My reason for getting rid of Chems was for only 1 reason, i could not get the body shadow to look good it just looked like the car was floating especially with no sun so i thought well there is a choice of many so may aswell try them all and be picky. i came to the conclusion that the best looking ones were the ones from ACC so FSR and Chem's. The ripped physics dont bother me to much the body shadow does.

chem's is the better car in terms of physics and probably other bells and whistles that i dont know anything about but there not so far apart that it bothers me if that makes sense. i just realised i could swap over the skins so thought why not incase anyone has the FSR version


edit chem's brakes now also just glow orange/red all the time along with most of the other car's since an update with CSP or CM and the FSR one works as it should for me so that was another reason.
 
Last edited:
Monza AI

I'm tossing this out there for anyone who might like to try it. I made my own ai for Monza for no real reason other than I am trying to learn how to make better ai. Since this is a track I race a lot, I was familiar with the stock ai and could recognize changes in their behavior.

I'm not a good\fast driver so this ai is not for alien drivers as their lap times are slower than with the stock ai. But for some reason, despite being slower, I get much better battles for from the ai with this. They seem quicker through the turns and don't seem to give up as easily when going in to the turns together so I find it very hard to clear them coming out of the turns. But as usual with this game, you may have different results.

If you want to try it, I would suggest raising the ai strength percentage you typically use with the stock ai by about 5%. And for the record, I ran all my races with 95% +\- 5% aggression except for the F1 cars. I don't really drive F1 cars all that much so I didn't thoroughly test this with F1s. It may or may not work well. One last thing, on rare occasions, one of the ai cars will get spun around on the first lap coming out of the first chicane. I've seen it about 1 out of every 10-15 races. Again, your results may vary.

Silly video showing what I mean about how hard a time i'm having getting past an ai car. I'm in the BMW. Don't laugh at my lack of driving skill please...

mega.nz

File on MEGA

mega.nz mega.nz
 
Last edited:
Teddie
I've seen the same. Does it fix itself when you restart cm as mine does? Also check out the actual files after editing cars etc. You may notice your changes aren't correct in the files even if correct in the gui. If you notice issues, lemme know. I have a workaround, but on phone at moment
Click to expand...
I modified a skin, among the cars used in the championship, and now after the "restart" it SEEMS to work well, it no longer gives the error. I noticed one thing when using the "Rolling start" mod: not all cars start for the formation lap, some remain stationary on the grid and then retire. Only after 2/3 attempts do they all start
 
maximeerkat
ferrari 296 gt3 skins by FSR


install: unzip and drag the content folder to CM


i haven't made any of these skins all i have done here is rename the skin so they would go onto the FSR version as Chemflummi and FSR are both ripped from ACC (i think) or whatever game its irrelevant really.

photo just to show the amount more than anything

fsr version was lacking skins........its not now

car can be found by a search but i promise you 1 thing...........you will not find it on addonhub..........no sir!

lots of skins for ferrari 296 gt3 by FSR

install: unzip and drag the content folder to CM i haven't made any of these skins all i have done here is rename the skin so they would go onto the FSR version as Chemflummi and FSR are both ripped from ACC (i think) or whatever game its...
www.gtplanet.net www.gtplanet.net
Click to expand...
My new skins are in there already, uncredited? Dang. I guess that's just the way of the world. (I'll never learn)
 
Last edited:
sab001
My new skins are in there already, uncredited? Dang. I guess that's just the way of the world. (I'll never learn)
Click to expand...
to many skins done by people i cannot remember the names of i wouldn't even consider doing "credit's" to anyone on this occasion for that very reason. i whack it out you download or you do not kind of thing. I have made people aware that they are not my work so if people want to find out who done them they are free to do so and do there own research.
 
Hello

Csp wipers for Nissan GT-R GT1 (Unknown/Yezhrod)

[ANIMATED_WIPER_...]
MESHES = nis_r35_gt1_kit00_chaanim_cpit
UNDERLYING_SURFACE = nis_r35_gt1_kit00_body_loda_SUB5
DEBUG = 1 ; remove when everything is ready

[MESH_ADJUSTMENT_...]
MESHES = nis_r35_gt1_kit00_chaanim_cpit
MOVE_TO = modelRoot:y

[BASIC]
DISABLE_WIPER_KSANIM = 1

GROUP_0 = 'nis_r35_gt1_kit00_chaanim_cpit@A=*'
GROUP_0_ANGLE_TO = 120
GROUP_0_AXIS = 0, 0.70710677, 0.70710677
GROUP_0_AXIS_OFFSET_0 = 0, 0.70710677, 0.70710677
GROUP_0_AXIS_OFFSET_1 = 0, 0.70710677, 0.70710677
GROUP_0_END = -0.65595555, 0.8780406, 0.65197474
GROUP_0_PIVOT = -0.0857308, 0.8346839, 0.9244923

enjoy
 
Does anyone know if Reboot's Dubai International Autodrome is still being worked on? It's in Version 0.81, and I noticed a small issue with where the pit lane entry registered tonight in my server's event.

Not worth going into further detail if it's been dropped, but figured I'd give it a shout.
 
MrHunt
@Peter Boese

A friend of mine just wrote to me and said that when he presses ctrl+c and set weather to thunderstorm (AI driving) with the latest PURE version, the game crashes, can anyone confirm this?
Click to expand...
I think its just random. It will surely crash if no AI spline exist for the track and you hit CTRL-C

alexlockout
Good evening. Does anyone have any thoughts about the "weather fx" tab, why turning on this tab spoils the appearance of the game so much? example, two screenshots, 1 - the "weather fx" tab is disabled, 2 - absolutely the same graphics / weather settings, everything is exactly the same, only one difference, I checked the "active" checkbox in the "weather fx" tab.
and in the second picture the image is somehow flat, bleached, the clouds look different, the shadows are almost invisible, the metal (on the steering wheel) does not have a pleasant shine.
View attachment 1333020
View attachment 1333025
View attachment 1333021
View attachment 1333026
Click to expand...
the first scrennshot is stock AC graphics with gbw weather mod. The second one is CSP default weather style, which is just a basic implementation of what we call the future of AC for like 4 years now. You could install Sol, its an advanced weather style which improves the graphics. Also Sol already has a successor called "Pure", which takes lighting to a whole new level. But if you don't care about all this, just leave it deactivated. WeatherFX is a massive graphics mod, which makes way more things possible in AC, but you need the willing to dig into this...
 
Fanapryde
Works for me in most cars, but not for the (CSP versions) VRC BTCC cars.
So, if you want these to act with manual gearbox, you need to unpack data.acd, open drivetrain.ini and find [GEARBOX]
Change SUPPORTS_SHIFTER=0 to 1.
Then either repack data, or check the use unpacked data if exists in the CM DRIVE tab.
But (I read the part where the ui says 6-speed manual transmission) the car has a sequential stick sifter which is animated as sequential...
Click to expand...
I'll try, thanks

Piresdiogo
Hello

Csp wipers for Nissan GT-R GT1 (Unknown/Yezhrod)

[ANIMATED_WIPER_...]
MESHES = nis_r35_gt1_kit00_chaanim_cpit
UNDERLYING_SURFACE = nis_r35_gt1_kit00_body_loda_SUB5
DEBUG = 1 ; remove when everything is ready

[MESH_ADJUSTMENT_...]
MESHES = nis_r35_gt1_kit00_chaanim_cpit
MOVE_TO = modelRoot:y

[BASIC]
DISABLE_WIPER_KSANIM = 1

GROUP_0 = 'nis_r35_gt1_kit00_chaanim_cpit@A=*'
GROUP_0_ANGLE_TO = 120
GROUP_0_AXIS = 0, 0.70710677, 0.70710677
GROUP_0_AXIS_OFFSET_0 = 0, 0.70710677, 0.70710677
GROUP_0_AXIS_OFFSET_1 = 0, 0.70710677, 0.70710677
GROUP_0_END = -0.65595555, 0.8780406, 0.65197474
GROUP_0_PIVOT = -0.0857308, 0.8346839, 0.9244923

enjoy
Click to expand...
Is the extension for this? It doesn't work for me, or maybe I created the extension file wrong... thanks

1709364564820.png
 
Alguecool
Ah, love the welds !

Is it just me or there is something wrong with the tires ? Like if there was no "inside" ?
Click to expand...
Tires will be replaced anyway. I will replace them with the same tires i have on my other mods.

And there can still be a lot of bugs for now, because i just finished the texturing for interior and this was a test to see them ingame. I still didn't put my hands on the shader settings and materials. There is still a lot of work.
 
Last edited:
Piresdiogo
Hello

Csp wipers for Nissan GT-R GT1 (Unknown/Yezhrod)

[ANIMATED_WIPER_...]
MESHES = nis_r35_gt1_kit00_chaanim_cpit
UNDERLYING_SURFACE = nis_r35_gt1_kit00_body_loda_SUB5
DEBUG = 1 ; remove when everything is ready

[MESH_ADJUSTMENT_...]
MESHES = nis_r35_gt1_kit00_chaanim_cpit
MOVE_TO = modelRoot:y

[BASIC]
DISABLE_WIPER_KSANIM = 1

GROUP_0 = 'nis_r35_gt1_kit00_chaanim_cpit@A=*'
GROUP_0_ANGLE_TO = 120
GROUP_0_AXIS = 0, 0.70710677, 0.70710677
GROUP_0_AXIS_OFFSET_0 = 0, 0.70710677, 0.70710677
GROUP_0_AXIS_OFFSET_1 = 0, 0.70710677, 0.70710677
GROUP_0_END = -0.65595555, 0.8780406, 0.65197474
GROUP_0_PIVOT = -0.0857308, 0.8346839, 0.9244923

enjoy
Click to expand...
That’s great but again the car is still absolutely tiny, way too small for me to ever want to use it unfortunately.

I still hope someone grabbed the upscaled version I posted and may one day work on that.
 

Attachments

  • Screenshot_alg_iso_grifo_grindelwald_1-2-124-16-8-32.jpg
    Screenshot_alg_iso_grifo_grindelwald_1-2-124-16-8-32.jpg
    102.6 KB · Views: 18
  • Screenshot_alg_iso_grifo_monaco_1966_28-1-124-9-42-15.jpg
    Screenshot_alg_iso_grifo_monaco_1966_28-1-124-9-42-15.jpg
    61.6 KB · Views: 20
  • Screenshot_alg_iso_grifo_rt_bannochbrae_28-1-124-16-12-59.jpg
    Screenshot_alg_iso_grifo_rt_bannochbrae_28-1-124-16-12-59.jpg
    141.7 KB · Views: 16
  • Screenshot_alg_iso_grifo_rt_bannochbrae_28-1-124-16-17-28.jpg
    Screenshot_alg_iso_grifo_rt_bannochbrae_28-1-124-16-17-28.jpg
    77.1 KB · Views: 18
  • Screenshot_alg_iso_grifo_rt_bannochbrae_28-1-124-16-20-13.jpg
    Screenshot_alg_iso_grifo_rt_bannochbrae_28-1-124-16-20-13.jpg
    105.4 KB · Views: 20
Last edited:
Last edited:
Peter Boese
The second one is CSP default weather style
Click to expand...
that is, the default weather of the game and the default weather selected in the "weather fx" tab are not the same thing? are these two different weather models? Well then it’s clear why there’s such a difference.
Peter Boese
You could install Sol, its an advanced weather style which improves the graphics. Also Sol already has a successor called "Pure"
Click to expand...
I've used both sol and pure before, but I don't like how some things look in them, for example chrome parts, sometimes they look more like plastic than shiny metal, so I prefer the default weather of the game itself. I just would like to use the default weather of the game, but be able to change the time in a larger range, and not just until 19:00, but apparently this is impossible.
 
Alguecool
RELEASE V1.0 :

ISO GRIFO GL 1965
​
View attachment 1333195

Link to download : https://www.gtplanet.net/forum/downloads/iso-grifo-gl.6800/

Features a brand new car, scratch-made with a lot of love and a lot of passion.
Free and unencrypted, of course.

Hope you enjoy it.

View attachment 1333197

View attachment 1333196
Click to expand...
Amazing job, thanks very much. Get it on RD too for greater exposure.
One thing I instantly noticed was the cockpit glass not letting shadow-casting light in, so everything looks very flat in the cabin.
Add this to the config if you don't want to fix it on the kn5.
Code: 
;fix shadow-casting light in cockpit
[SHADER_REPLACEMENT_...]
ACTIVE = 1
MATERIALS = Internal_glass
CAST_SHADOWS = 0
 
Masscot
Amazing job, thanks very much. Get it on RD too for greater exposure.
One thing I instantly noticed was the cockpit glass not letting shadow-casting light in, so everything looks very flat in the cabin.
Add this to the config if you don't want to fix it on the kn5.
Code: 
;fix shadow-casting light in cockpit
[SHADER_REPLACEMENT_...]
ACTIVE = 1
MATERIALS = Internal_glass
CAST_SHADOWS = 0
Click to expand...
You would not believe how many times I clicked on "cast shadow : OFF" on that damn Kseditor ****ware. I didn't even think about it being not right (but now with the fix, yep that's looking more logical...).

Thanks dude!

content is up to date, V1.01 is the lastest as of now.

And no, I will not post on RD anymore. No bitter or anything, just I do not understand their policy and don't want to post there anymore. I already know the car will be probably repost on actk, assetto-world etc, so no need to multiply, and I kind of not care much for exposure, to be honest. If I was caring for that, I wouldn't do a P70 or a Grifo A3/L hahaha. Talking about it, I have to admit I do not have any project in the book anymore, so... Guys, I'm open to suggestion :sly:
 
Moor1804
Hi everyone, can anyone tell me why some cars like the Vrc Touring or Rss Endurance ones don't recognize the H gearbox? Can it be activated somehow? Thanks in advance
Click to expand...
Although what @Fanapryde said is true, you might want to consider that the cars you are referring to are not gate shifter car but are sequential using a shifter instead of paddles. It is frequent with those type of cars.
 
 
Last edited:
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.

Similar threads

Famine
Assetto Corsa Rally Revealed, Heads to Steam Early Access on November 13
2
Replies
45
Views
7K
whannel
whannel
Famine
Assetto Corsa EVO Early Access Discussion Thread
25 26 27
Replies
809
Views
182K
RMi_wood
RMi_wood
Terronium-12
Assetto Corsa EVO Update 0.3 Now Available in “Open” Beta Test Branch
2
Replies
33
Views
16K
Cote Dazur
Cote Dazur
S
Logitech G Pro wheel settings Assetto Corsa
Replies
0
Views
4K
Shah1
S
OH1955
  • Question Question
Anybody got Oakes Field (Nassau) for Assetto Corsa?
Replies
5
Views
12K
OH1955
OH1955

Latest Posts

Back