Assetto Corsa PC Mods General DiscussionPC
- Thread starter daan
- 141,627 comments
- 39,246,192 views
Getting into scripting:
As said here Cars – Physics scripts it is possible to simulate gearbox damage in cars.
Example:
function script.update(dt)
if car.waterTemperature > 95 then
ac.accessCarPhysics().engineLifeLeft = 0 <- What should this marked text be to make the gearbox go boom and not the engine?
end
end
I can't figure it out, gearboxLifeLeft, gearboxDamage...nothing works so far.
As said here Cars – Physics scripts it is possible to simulate gearbox damage in cars.
Example:
function script.update(dt)
if car.waterTemperature > 95 then
ac.accessCarPhysics().engineLifeLeft = 0 <- What should this marked text be to make the gearbox go boom and not the engine?
end
end
I can't figure it out, gearboxLifeLeft, gearboxDamage...nothing works so far.
- 610
- Germany
You can buy everything from Tommy, it's well done, except the AI so I made a patch some time ago.
DTM 1991 + TCR2019 (Tommy78) faster AI v2.0 by Rainmaker
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Last edited:
- 179
- Italy
Oh thank you very muchYou can buy everything from Tommy, it's well done, except the AI so I made a patch it some time ago.
DTM 1991 + TCR2019 (Tommy78) faster AI v2.0 by Rainmaker
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.www.mediafire.com
- 660
- Germany
- JK-1977
Opel Calibra DTM V6 ´94
Version 1.2
new Exhaust AO Map
new Front Light AO Map
Add Turnlight
Add Shift Animation
Add new Skins by maximeerkat
New Rim Schader Settings
Lod D fix by ACTK
DELETE the OLD CAR
mega.nz
Version 1.2
new Exhaust AO Map
new Front Light AO Map
Add Turnlight
Add Shift Animation
Add new Skins by maximeerkat
New Rim Schader Settings
Lod D fix by ACTK
DELETE the OLD CAR
119.36 MB file on MEGA
Last edited:
- 723
- United Kingdom
Does anybody know if it is possible to change the size of an ambient shadow through an extension folder within a skin folder? i know you can change it in data but i want it to be different only for 1 skin not all of them.
thanks
thanks
- 249
- Germany
Is there a way to get acu_singapore to work properly during night... When I set the time the white lines on the track are almost invisible and I would like to know what I can do to make it better... Why I use this track? because I wanted to do a lap on the 2014 layout which doesn't exist anywhere else
Last edited:
would copying the files into the skins work on the 89' verion too ?Hi Guys
Interior looking good so far, complete interior texture update for t78_m3evo_dtm.
Will upload a bit later
View attachment 1387252View attachment 1387253
- 96
- South Africa
Unfortunately not, not all textures are the same
Really love this car and apprciate all the work gone into it, thank you!Opel Calibra DTM V6 ´94
Version 1.2
new Exhaust AO Map
new Front Light AO Map
Add Turnlight
Add Shift Animation
Add new Skins by maximeerkat
New Rim Schader Settings
Lod D fix by ACTK
DELETE the OLD CAR
119.36 MB file on MEGA
One thing I noticed with this update is that the rolecage, exaust and front headlights all use the same texture, so one can't change the color without effecting all three parts.
Is there a way to change this?
Rear diffuser is also a bit bright now.
Singapore Track Texture update
Hi Guys Been a while since I've played or worked on any tracks. It's the holidays and was enjoying this track and thought, let me try a complete texture update. Hope you guys like, have fun :) All textures have be upscaled and completely...
www.overtake.gg
- 701
- Australia
If you are interested, more than willing to share the entire GIMP file (decals, paths, layers, etc) for a particular livery of your choice so that you can have an entire insight to how I've structured it.
The offer is also extended to anyone else if this arouses your appetite... The more the merrier. DM me with your request and shall prepare it.
Opel Calibra DTM - ELF Livery WIP
Today (Sunday) I was looking for some kind of inspiration on what the last (or semi-last) livery I ought to attempt and came across this BTCC mod & liveries shared by the GTP community - and thought this one will do just fine.
I've covered off most decals that will be used thus far, like 90% of them, and now I'll attempt at doing the crisscross graphics-layout from scratch... But before starting I thought to google if something similar was out there, and came across different types of worthwhile images, like:
and this one...
Which one to use???
Last edited:
- 165
- Italy
https://www.overtake.gg/downloads/circuit-chambley-par-race-system.71904/
If you want to correct the tree shadows with @Masscot's fix (and hide the baloons "wall") add the following lines to ext_config.ini
;unfeck borked tree normals
[ALTER_NORMALS_...]
MATERIALS = shader:ksTree
OFFSET = 0, 1e9, 0
[SHADER_REPLACEMENT_...]
DESCRIPTION= lighten/darken trees after normal fix above
MATERIALS = shader:ksTree
PROP_... = ksAmbient, 0.12 ; 0.3 up or down
PROP_... = ksDiffuse, 0.12
; hide ballons
[MESH_ADJUSTMENT_...]
IS_ACTIVE = 1
MESHES = OBJ61, OBJ61.001
IS_RENDERABLE = 0
Before After
If you want to correct the tree shadows with @Masscot's fix (and hide the baloons "wall") add the following lines to ext_config.ini
;unfeck borked tree normals
[ALTER_NORMALS_...]
MATERIALS = shader:ksTree
OFFSET = 0, 1e9, 0
[SHADER_REPLACEMENT_...]
DESCRIPTION= lighten/darken trees after normal fix above
MATERIALS = shader:ksTree
PROP_... = ksAmbient, 0.12 ; 0.3 up or down
PROP_... = ksDiffuse, 0.12
; hide ballons
[MESH_ADJUSTMENT_...]
IS_ACTIVE = 1
MESHES = OBJ61, OBJ61.001
IS_RENDERABLE = 0
Before After
second one... please, please 🤩
Last edited:
- 723
- United Kingdom
BTCC Ford Mandingo skin taken from a slightly earlier version of the car
no AO with this, if you add an AO you will get a square patch on the boot where i have hidden the plate and you will get black patches on either wing where i have removed the side repeaters. Car is fairly dark anyway so i chose this path with no AO.
4k only
drag and drop to install
www.gtplanet.net
no AO with this, if you add an AO you will get a square patch on the boot where i have hidden the plate and you will get black patches on either wing where i have removed the side repeaters. Car is fairly dark anyway so i chose this path with no AO.
4k only
drag and drop to install
BTCC Ford MANDINGO Skin (car link included)
BTCC Ford Mandingo skin taken from a slightly earlier version of the car no AO with this, if you add an AO you will get a square patch on the boot where i have hidden the plate and you will get black patches on either wing where i have removed...
www.gtplanet.net
- 6,823
- The Bunker
Heads up, the link has just been updated by Peter with some fixes, including new driver and shifting animation, exterior black trim/black glass fix, and a cockpit sunlight encroachment fix.
Edit: these new B, C and D LODs need adding to the car folder to match the new exterior trim values. Overwrite the existing ones.
Last edited:
- 77
- United Kingdom
Blender texture paint, brings up the car body (or any part), then you have the 2D one side and 3D the other and you can literally apply the decals or paint onto the 3D model live.
It works for me as its enjoyable to do and see, once i had the skin saved i merge it with the AO base and have a skin.
Like this one its awkward to skin in 2d because the map isn't quite right, but in blender it doesn't matter...
Last edited:
- 348
- Germany
Do you use Pure LCS and pureCandy ppfilter?
Otherwise it is related to the CSP fake shadows. If its set to higher than 1.0 this is the effect then.
That mistake i made is solved with the new Pure 2.1 and its reworked pureCandy ppfilter.
If you use a different ppfilter + script, you could search for:
"ac.setWeatherFakeShadowOpacity(...)" - it must be 1.0:
ac.setWeatherFakeShadowOpacity(1.0)
- 77
- United Kingdom
Better example.... look at the map, its all over the place impossible to do in 2D..
So do it in 3D.
I wouldn't suggest people do it this way if they have a way already, but its great for cars with weird maps and looks nice visually to work in and results happen straight away live.
A nice tool to have along side the other ways for sure..
Put it this way, the 3D on the right, you click mouse button and 'spray' on the decals, so satisfying... it really is a paint shop game in itself.
Last edited:
Yes, Pure LCS and pureCandy was the culprit. Thought I had messed up some settings.
Thank you.
- 77
- United Kingdom
Yep that'll do it, it took me some time to get my head around a few things but once you get it its a lot of fun, and i never personally found skinning in 2D 'fun'. I do a lot of modding of model sources that don't have great Maps, so its been a god send.
Look at this map for example...
Similar threads
