Assetto Corsa PC Mods General DiscussionPC

[Peter Boese]

Was a bit thinking about DLSS4 this weekend and by fiddling, I think, I did get DLSS4 active in AC-VR. Not sure but I have the left/bottom text at the screen the DLSS4 “Preset K” notification. That according to some only shows at the screen when you are running DLLS4
Its was very late this sunday evening could be placebo effect. Maybe if @Peter Boese is willing I can sent him the instructions how I did this as he has a lot of knowledge, a VR headset, patience because I have to write the instructions and my sources.

Sure why not

 

[MARKDENNY]

Good Evening all

Has anybody out there got rain fx for 60s Eifel Betonschleife by Sergio LORO please and be willing to share ?

Regards

Mark

 

[Perico Lospa]

strange that not everyone has this problem, I don't see this grid either, maybe something activated in CSP that creates this problem?

Well, I couldn't really say... It seems like half of the people have this problem and the other half don't...

Aside from could be a CSP issue, I also think the monitor's resolution or settings may be playing a role, or guess what... It's a very subtle effect that can go unnoticed, but it definitely exists, as pugsang provided a solution...

 

[marc magnela]

Well, I couldn't really say... It seems like half of the people have this problem and the other half don't...

Aside from could be a CSP issue, I also think the monitor's resolution or settings may be playing a role, or guess what... It's a very subtle effect that can go unnoticed, but it definitely exists, as pugsang provided a solution...

add this to ext_config.ini , it should work

[SHADER_REPLACEMENT_...]
ACTIVE = 1
MATERIALS = INT_WINDOWS_2
BLEND_MODE = ALPHA_BLEND
IS_TRANSPARENT = 1
CAST_SHADOWS = 0

but this will create overlays on the badges, which is not a problem with APHA_TEST.

 

[Gabriele]

possible if you have some highres pictures?

There's something here:

Fotovigghe Marco

Fotovigghe Marco. 5,636 likes · 228 talking about this. Pagina dedicata in maggioranza alla fotografia sportiva, ai servizi e ai reportage fotografici effettuati durante i miei viaggi.

www.facebook.com

1995 Campionato Italiano Superturismo

Entry list and results for 1995 Campionato Italiano Superturismo

www.supertouringregister.com

Campionato Italiano Superturismo Varano (ITA) 18-19 09 1994

Powered by MomaPIX digital asset management software

www.girardoarchive.com

 

[pugsang]

add this to ext_config.ini , it should work

[SHADER_REPLACEMENT_...]
ACTIVE = 1
MATERIALS = INT_WINDOWS_2
BLEND_MODE = ALPHA_BLEND
IS_TRANSPARENT = 1
CAST_SHADOWS = 0

but this will create overlays on the badges, which is not a problem with APHA_TEST.

View attachment 1426531

This should fix it

[SHADER_REPLACEMENT_...]
ACTIVE = 1
SHADER = ksPerpixel
MATERIALS = INT_WINDOWS_2
BLEND_MODE = ALPHA_BLEND
IS_TRANSPARENT = 1
CAST_SHADOWS = 0

 

[Perico Lospa]

add this to ext_config.ini , it should work

[SHADER_REPLACEMENT_...]
ACTIVE = 1
MATERIALS = INT_WINDOWS_2
BLEND_MODE = ALPHA_BLEND
IS_TRANSPARENT = 1
CAST_SHADOWS = 0

but this will create overlays on the badges, which is not a problem with APHA_TEST...

While you were editing the message I was doing tests and indeed, the code you posted solves the grid pattern issue... but other problem appears to me, as you mentioned; some elements, like the black edge of the inside of the windshield, that overlaps the rest of the windows...

I think for now I'll stick with the ACTK version with pugsang's main .kn5 and Den_88's ex_config.ini, which adds, among others, the reversing light and it looks great with this gorgeous skin reworked by StoffelWaffle...

All that's left to implement in this Frankestein combination is the antenna woble and Masscot's lightening of the rear lenses, and I think it would be pretty good... if it weren't for the front tires clipping on the fenders... 🥳

 

[jac0]

the Porsche 911 Carrera RS 3.8 by RealSpecs (rs_porsche_911_964_38_rs_93) , found in the Garage
is quite enjoyable but only comes with 1 skin, so here some extra (fictional) skins :

(original skin was also made less reflective by adding a config ini file inside the original skin folder)

DOWNLOAD

 

[pugsang]

While you were editing the message I was doing tests and indeed, the code you posted solves the grid pattern issue... but other problem appears to me, as you mentioned; some elements, like the black edge of the inside of the windshield, that overlaps the rest of the windows...

View attachment 1426535

I think for now I'll stick with the ACTK version with pugsang's main .kn5 and Den_88's ex_config.ini, which adds, among others, the reversing light and it looks great with this gorgeous skin reworked by StoffelWaffle...

View attachment 1426537

All that's left to implement in this Frankestein combination is the antenna woble and Masscot's lightening of the rear lenses, and I think it would be pretty good... if it weren't for the front tires clipping on the fenders... 🥳

[SHADER_REPLACEMENT_...]
ACTIVE = 1
SHADER = ksPerpixel
MATERIALS = INT_WINDOWS_2
BLEND_MODE = ALPHA_BLEND
IS_TRANSPARENT = 1
CAST_SHADOWS = 0

 

[racinjoe013]

Hello everyone.
Is it possible to move or delete an object on a track using ext_config?

Move, i'm not sure about. Delete, not really, but you can hide it one of two ways. First you need to know the object mesh name. That you can get with the Object Inspector app. Then you can use either of these two methods to hide the object.

1.) Can sometimes cause problems if the object has collision physics. If you drive where the object was, you can still bounce off of it like it was still there.

[MESH_ADJUSTMENT_...]
ACTIVE = 1
DESCRIPTION = Not really needed, but you can put something here if you want.
MESHES = 'Mesh name you got from the object inspector app'
IS_RENDERABLE = 0

2.) Try this one first

[MODEL_REPLACEMENT_...]
ACTIVE = 1
FILE = ?.kn5
HIDE = 'Mesh name you got from the object inspector app'

 

[caanglin]

Driving wise how does the F302 A4 feel compared to the Cyril Cherry A4?

 

[Gabriele]

If other people won't do them I could but doing PROCAR skins is already time consuming (2 hours on average / skin, bit more if I have to do everything from scratch)

he did some

Resources by 19_scaRFace_91

www.overtake.gg

 

[Perico Lospa]

This should fix it

[SHADER_REPLACEMENT_...]
ACTIVE = 1
SHADER = ksPerpixel
MATERIALS = INT_WINDOWS_2
BLEND_MODE = ALPHA_BLEND
IS_TRANSPARENT = 1
CAST_SHADOWS = 0

Now I'm really lost... I don't know whether to cut my veins or let them grow... 🥴 This code is to use the ACTK version removing the windscreen grid pattern without having overlap problems...?

(I think you all are plotting to drive me completely bananas. I'm going to sleep and tomorrow will be another day...)

 

[pugsang]

Yes this code is as you say. The artifacts you see is because of the normal map. You have to change the shader to ksperpixel

 

[OooAhh Cantona]

Now I'm really lost... I don't know whether to cut my veins or let them grow... 🥴 This code is to use the ACTK version removing the grid pattern without having overlap problems...?

DJ Khaled is now producing updates for the Audi A4.

 

[Perico Lospa]

Yes this code is as you say. The artifacts you see is because of the normal map. You have to change the shader to ksperpixel

I understand then that it would no longer be necessary to use your main .kn5...

 

[pugsang]

Correct

 

[Perico Lospa]

Correct

Thank you very much for your patience... I will continue doing experiments tomorrow, I am already exhausted; we civil servants are not used to having to use our brains so much... 🤯