Drive Hub Racing Wheel Converter

[Goonie75]

I did a league race last night in GTS and Beta 9 was fine, I did have to turn the FFB torque down 1 to 3 or 4 in game and DRI to 0.
In GT7 I have only done a few missions since the last 1.13 update, I had to turn down FFB Torque down to 2, and I think I turned down FEI a bit as well (can't remember if I changed FEI), but after those changes it seemed fine for me, I will hopefully do some more GT7 during the week and test further.

 

[Goshin2568]

Wouldn't recommend it. unless you want the new stutter bug and crazy oscillation. beta 8 fixed the original stutter issues and kept most wheels as a CSL elite.
Beta 9 changed the game to see our wheels as GT DD pros (assuming the csw are also seen as it?)

Because the new gt7 update changed FFB on DD wheels, its created a new issue/bug only on beta 9 i believe. (beta 8 should be ok)

The new ffb bug is like what the FFB felt like when we tried logitech mode at the beginning. very heavy and crazy oscillation especially on fast cars. sure you can lower the FFB settings both ingame and on wheel but you will prolly be losing detail.
the Stutter bug is so small I'm assuming a few ppl might not even notice it. but def there and looks to mess with times again.

I'm on beta 8 with a csw 2.5 and I'm still having that same issue. It could be worse with beta 9, I'm not sure I haven't tried it, but beta 8 definitely still has that issue to some extent too

 

[Frisk_]

Any info about what is in beta 11 ?

 

[Goonie75]

Was there a 10 as well?

 

[No Depth]

There is actually a Beta 12 now it seems. No 10 though, skips from 9 to both 11 and 12.

Just tried 12 and it still recognized my DD2 as a DD Pro. Seems like the micro stutter issue may be addressed in it. I was able to get better medal times again in music rally(which is a good litmus test I find for this).

FFB seems a bit flattened out now too. Meaning it isn’t spiking quite as high during slip as before, but road feel is very weak or hard to feel. If I bump up the setting in my DD2, the FFB clips snd causes massive clacking, so I have to keep it in a range similar to the level of an 8nm DD Pro(~35%). Need to try out a variety of cars though to get a proper assessment. Only really did a few races, mostly with mid-range road cars. Nothing fast or heavy.

But glad to see progress.

 

[Goonie75]

We really need a release notes page or something similar.

 

[staticbg]

it's a damn shame the rev counter doesnt work in gt7 too

 

[Mad1723]

You mean the LEDs? Because they work for me.

 

[End of an Era]

Hello again @Podger.
Thank you for making "Sim Racing Pro SRP Pedals" a target model.

 

[staticbg]

You mean the LEDs? Because they work for me.

in gt7 i meant.

 

[Shottah072]

in gt7 i meant.

They work in GT7 on my Formula V2. If its not working for you then you probably got the DriveHub in Logitech mode it should be in Fanatec mode.

Tried Beta 12 with the CSL DD. The shaking and weird unnatural behavior mid corner is still there but less aggressive then it was on Beta 9 wich was the last one i tried. Still not very pleasent to drive though imo.

My wheel does get recognized in PC mode now, before it only worked in compatibility mode.

 

[Mad1723]

Huh! Might have to try in PC mode instead of compatibility now then. And same for the LEDs, work fine if you are in Fanatec mode @staticbg . Make sure there's an F appearing on your wheel when it starts with the Drivehub. Or just check which wheel is recognized in the options of GT7, it'll show you what it recognizes.

 

[F1nutcase]

I have always used PC mode. I have a V2 wheel and the rev lights work. I think I'm in Fanatec mode but unsure how to confirm.

 

[Goonie75]

Toggle switches working in GT7 for any CSW users on these new firmwares, I have the McLaren V2, but the Formula wheels should be the same.

 

[Shottah072]

I have always used PC mode. I have a V2 wheel and the rev lights work. I think I'm in Fanatec mode but unsure how to confirm.

If your lights work your definetly in fanatec mode.

It also flashes a F on start up for a short moment.

 

[staticbg]

i have a cheap tmx and by the leds i meant the drivehub rev led's lol

 

[gainusha]

i have a cheap tmx and by the leds i meant the drivehub rev led's lol

I think the drivehub rev led's are only working on PS4

 

[Goonie75]

He knows about the slight stutter and Increased FFB feel and i have forward him the post about the not being able to hit gold due to the stutter.

Unsure when he will get time to look at it. As hes on other projects, i don't want to keep bugging him about it. But im sure he will look at it Soon.

"Other Projects"

Drive Hub 2 perhaps?

 

[whiteusagi]

Toggle switches working in GT7 for any CSW users on these new firmwares, I have the McLaren V2, but the Formula wheels should be the same.

Which firmware are you using? I am currently on beta 12 but the toggle switches still do not work for GT7 on my McLaren V2 on a CSL Elite wheelbase.

 

[Goonie75]

Any news on the

Which firmware are you using? I am currently on beta 12 but the toggle switches still do not work for GT7 on my McLaren V2 on a CSL Elite wheelbase.

Beta 9 still

 

[Goonie75]

Any news on the official changes for beat 11 & 12?

 

[whiteusagi]

Any news on the
Beta 9 still

So just to be clear, the toggle switches on the V2 work on beta 9 with a CSW wheelbase?

 

[Goonie75]

So just to be clear, the toggle switches on the V2 work on beta 9 with a CSW wheelbase?

No mine don't work, sorry I should have stated that in my original post on the topic, I was trying to see if anyone else's wheel was working

GT7 sees the base as a DD Pro but red toggles do not work, unlike on a real DD PRo.

 

[F1nutcase]

So just to be clear, the toggle switches on the V2 work on beta 9 with a CSW wheelbase?

Same here. The red toggles work on my V2 with the CSW 2.5. I'm on Beta 9

 

[whiteusagi]

To summarize:

F1nutcase - CSW base - Formula V2 - DH beta 9/12 (Fanatec mode) - toggles DO work
Goonie75 - CSW base - McLaren V2 - DH beta 9 (Fanatec mode) - toggles do NOT work
whiteusagi - CSLE base - McLaren V2 - DH beta 9/12 (Fanatec mode) - toggles do NOT work

Please let me know which mode (Fanatec/Fanalogic) your DH is in or if any of the above is incorrect!

 

[Goonie75]

Correct toggles not working, Fanatec mode

 

[Dazza83]

Any news on the official changes for beat 11 & 12?

.11 SRP pedals added
.12 Venym pedals added and fixed output poll rate on ps5

podger believes the output poll rate issue could have been causing the slight stutter issues. I personally haven't touch the game in a week due to being ill so dunno if its gone.

Which firmware are you using? I am currently on beta 12 but the toggle switches still do not work for GT7 on my McLaren V2 on a CSL Elite wheelbase.

its recommended to email support with issues like this, enough complaints and the bosses will give podgers time and allow for fixes.

 

[F1nutcase]

To summarize:
whiteusagi - CSLE base - McLaren V2 - DH beta 9/12 (Fanatec mode) - toggles do NOT work
F1nutcase - CSW base - McLaren V2 - DH beta 9 (Fanatec/Fanalogic??) - toggles DO work
Goonie75 - CSW base - McLaren V2 - DH beta 9 (Fanatec mode) - toggles do NOT work

Please let me know which mode (Fanatec/Fanalogic) your DH is in or if any of the above is incorrect!

F1nutcase is in Fanatec mode as well.

 

[Migeta22]

Any news on the official changes for beat 11 & 12?

After updating from Beta 9 to 12. My Heusinkveld Ultimate Clutch issue is gone.

I can confirm that Heusinkveld Ultimate 3 pedals work perfectly on PS5 + GT7 + Drivehub with my T300 RS for those who are interested.

 

[Bensky]

Hi Everyone!
I'm new here and new to the drivehub. I would like to use the drivehub with my t300rs gt on series s. Which firmware are you recommend for me? Any suggestions?
Thanks!