Gran Turismo 7 Livery Editor - General Discussion Thread
- Thread starter MisterWaffles
- 3,086 comments
- 346,545 views
- 6,753
- Fürstentum Lippe
- GTP_Nuschel
It's a quarter circle with its center point being it's 90° edge. That can then be resized to get these stripes align properly. Unfortunately there's always a bit of the bottom decal's color showing through, but it works better than anything done with the ingame shapes.
Check out the BRZ GT300 livery I made and open it in the livery editor, It should explain itself how it works if you resize one of the decals
Last edited:
- 5,505
- Druids Bend
- Z4E_Midnight85
Love this! I've done the swap but not used the car yet - a Zent livery would finish it off nicely.I have decals for an Escudo livery made, but can't stop playing with engine swaps, and doing liveries for those cars.
Finished up a Zent livery for the Crown, loosely based on a GT500 Supra...
This car handles the swap like a champ, with no additional power adders.
- 5,505
- Druids Bend
- Z4E_Midnight85
Made an LT-swapped MX-5/Miata that now puts out 829hp. It's a handful and it's going to need some tuning, but absolutely flies around SSRX! I gave an urban camo style livery, with a metallic blue base and semi-gloss camo wrap, a few JDM/drift-style decals, blue wheels and a red cage.
- 149
- Australia
Are you saying that stripe from the rear light, all the way down to the front is this quarter circle decal???It's a quarter circle with its center point being it's 90° edge. That can then be resized to get these stripes align properly. Unfortunately there's always a bit of the bottom decal's color showing through, but it works better than anything done with the ingame shapes.
View attachment 1167085
Check out the BRZ GT300 livery I made and open it in the livery editor, It should explain itself how it works if you resize one of the decals
This is why mine will always be simple. Cant for the life of me fathom how that quarter circle makes that shape.
- 6,753
- Fürstentum Lippe
- GTP_Nuschel
Only the curved parts are layered decals. As I said feel free to check out my BRZ in the livery editor, it utilizes the same decals for the thin red stripe going over the rear wheel.
SuperGT liveries always scared me with their plethora of sponsor decals and complexity, but I've finally managed to motivate myself to make one. I think it turned out pretty good. For the drivers I chose the founder of Hasegawa Katsuro Hasegawa and Wangan Midnight Character Reina Akikawa.
- 814
- Amsterdam
- HennyGingerale
Amazing amazing. Where can I download this? And what scape location is it.I have decals for an Escudo livery made, but can't stop playing with engine swaps, and doing liveries for those cars.
Finished up a Zent livery for the Crown, loosely based on a GT500 Supra...
This car handles the swap like a champ, with no additional power adders.
- 2,977
- In the walls listen'...
- cross_dmd
- 5,505
- Druids Bend
- Z4E_Midnight85
Does anyone know if the texture mapping for the Aston Martin Vantage GT3 has changed since Sport or if they've renamed some of the preset shape decals? I imported an old Sport livery and a load of the decals (all one specific shape) have gone a bit awry. Namely around the roof line and under the bonnet undercut.
Anyone noticed this or had a similar experience with Sport-imported liveries?
I'm remaking the livery above as a KW Suspension version (the one above was for a friend's Manufacturer's campaign) so the plan was to switch some sponsor decals around and change the base shape colours - but it's going to need a load of rework now..
Anyone noticed this or had a similar experience with Sport-imported liveries?
I'm remaking the livery above as a KW Suspension version (the one above was for a friend's Manufacturer's campaign) so the plan was to switch some sponsor decals around and change the base shape colours - but it's going to need a load of rework now..
- 1,399
- Pennsylvania
- Drex125
- ScoobyMcPancake
Nismo 500HF
View media item 128807View media item 128808View media item 128809
One of the more interesting engine swaps deserved an appropriate outfit, so in the style of the Nismo's 270R and 400R, I present the 500HF.
Blue Nismo
Silver Nismo
View media item 128807View media item 128808View media item 128809
One of the more interesting engine swaps deserved an appropriate outfit, so in the style of the Nismo's 270R and 400R, I present the 500HF.
Blue Nismo
Silver Nismo
- 1,301
- Pennsylvania
- 2,510
- S.C.
- MMXtreme
A crap ton of these out there already, but wanted to do one myself. Spent a couple days drawing the decals that needed it, in the little bit of time I can do that sort of thing, but only took a couple hours in game, to put together.
The best pictures of this car are of a scale model, so most is based off of that.
The best pictures of this car are of a scale model, so most is based off of that.
- 981
- Sint-Truiden
- svenhjs666
Made these when i had the time & inspiration :
Coolblue Mercedes
Jungheinrich VW VGT
Jupiler BMW M4 Gr.4
Rich Energy Honda Civic Type R
Alfa Romeo 4C GT3
thanks for taking on my requests as i can use them on my liveries .
Coolblue Mercedes
Jungheinrich VW VGT
Jupiler BMW M4 Gr.4
Rich Energy Honda Civic Type R
Alfa Romeo 4C GT3
thanks for taking on my requests as i can use them on my liveries .
- 781
- Vermont
- huff-
This my entry for LEC 5, touring cars of the 90’s. I ended up making the Clifford dragon myself, as all the versions in showcase and from members here were incorrect for this car. Because I have no idea what I’m doing, I spent about 5 hrs on that decal alone. Edit: I wanted to use the decal that @Nuschel01 sent me, so I did the 91 M3 Omega car.
Last edited:
krisduv
Premium
- 1,659
- France
- krisduv
2022 IMSA Acura Bilstein #82
A non-replica livery not for the purpose of a LEC. It doesn't happen a lot in my gallery
A non-replica livery not for the purpose of a LEC. It doesn't happen a lot in my gallery
Last edited:
- 2,013
- Ireland
- Racer X
Similar threads
