- 96
- Zurich Switzerland
- timebandit67
GT Sport SVG request thread (Please read 1st post)
- Thread starter daan
- 10,545 comments
- 579,216 views
- 43
- Spain
- GrouchyOldRacer
Now that looks much better, the original one was just black and yellow. I will upload now and see what it looks like. THANK YOU
- 43
- Spain
- GrouchyOldRacer
It looks awesome, thanks again! Brilliant work!
- 96
- Zurich Switzerland
- timebandit67
then i'm happy 👍
- 587
- Italy
- alex_y_diegooo
Ehy guys, i am about to start a 2008 Woodone Clarion ADVAN GT-R replica, but i need some decals, i wasn't able to find all of them on the internet, so i took my PS3, i started gt6 and i took some photos, they're not perfect, but they should be fine, the problem is that they're not perfectly straight, but i think that there is some wizard know how to make them look perfect
(Ebbro) please maintain the "MINIATURE MODEL by MMP" writing
(Clarion) I found the chromed clarion logo on Gran Turismo, but not in a good quality, so i hope that someone will be able to make a good version of it, but i know it's diffucult.
(Drivers names) This is not staright because this is a photo of the roof that is curved.
(Pepsi nex) on this pay attention to the lower side, that's not flat and if possible i'd like to have the decal with the white background
(Vanilla Sky) it is not pefectly horizontal
I'm sorry for the photos that aren't perfect but i tried my best and GT6 photo mode is not as good as the GT Sport one.
Obviously any kind of help is appreciated
(Ebbro) please maintain the "MINIATURE MODEL by MMP" writing
(Clarion) I found the chromed clarion logo on Gran Turismo, but not in a good quality, so i hope that someone will be able to make a good version of it, but i know it's diffucult.
(Drivers names) This is not staright because this is a photo of the roof that is curved.
(Pepsi nex) on this pay attention to the lower side, that's not flat and if possible i'd like to have the decal with the white background
(Vanilla Sky) it is not pefectly horizontal
I'm sorry for the photos that aren't perfect but i tried my best and GT6 photo mode is not as good as the GT Sport one.
Obviously any kind of help is appreciated
- 587
- Italy
- alex_y_diegooo
- 96
- Zurich Switzerland
- timebandit67
Ehy guys, i am about to start a 2008 Woodone Clarion ADVAN GT-R replica, but i need some decals, i wasn't able to find all of them on the internet, so i took my PS3, i started gt6 and i took some photos, they're not perfect, but they should be fine, the problem is that they're not perfectly straight, but i think that there is some wizard know how to make them look perfect
Does anyone have time to test the Clarion sticker on PS4? Unfortunately, the upload preview doesn't say anything.
- 587
- Italy
- alex_y_diegooo
THAT'S PERFECT!!!!!
- 96
- Zurich Switzerland
- timebandit67
Have you tested it in the GTSport Livery Editor?
- 587
- Italy
- alex_y_diegooo
Now I'll try
- 587
- Italy
- alex_y_diegooo
It's black on the livery editor, i don't knkw why
- 96
- Zurich Switzerland
- timebandit67
I thought so, because color gradients are difficult. I need to investigate a gradient SVG that works in GTSport.
- 587
- Italy
- alex_y_diegooo
Ok, no rush, if you want you can do the others before, i can wait for the clarion logo.
- 96
- Zurich Switzerland
- timebandit67
Please test this sticker. I created it in Illustrator, then opened it in Inkscape and saved it and reduced it in SVGOMG. I would be surprised if it works!
- 587
- Italy
- alex_y_diegooo
Ok, in a minute I'll give you the resultPlease test this sticker. I created it in Illustrator, then opened it in Inkscape and saved it and reduced it in SVGOMG. I would be surprised if it works!
- 587
- Italy
- alex_y_diegooo
It's still black, wow it's hard!Please test this sticker. I created it in Illustrator, then opened it in Inkscape and saved it and reduced it in SVGOMG. I would be surprised if it works!
krisduv
Premium
- 1,659
- France
- krisduv
I hope you don't mind @Timebandit67 I took your file to "correct" the gradients (delete the gradientTransform)
- 587
- Italy
- alex_y_diegooo
- 96
- Zurich Switzerland
- timebandit67
No, I don't mind at all, on the contrary! I am happy if you show me what I'm doing wrong.
I work with Illustrator CC2020 and I have not yet managed to make an SVG with a gradient
And believe me, I've done a lot of SVG's.
I'm testing your SVG tonight. if it works, can I upload the Clarion SVG to my website https://www.kayyou.ch/svg
- 587
- Italy
- alex_y_diegooo
You have a site of SVGs for gt and you keep it a secret???! HahahahNo, I don't mind at all, on the contrary! I am happy if you show me what I'm doing wrong.
I work with Illustrator CC2020 and I have not yet managed to make an SVG with a gradient
And believe me, I've done a lot of SVG's.
I'm testing your SVG tonight. if it works, can I upload the Clarion SVG to my website https://www.kayyou.ch/svg
It's going to be incredibly useful in the future!
krisduv
Premium
- 1,659
- France
- krisduv
No, I don't mind at all, on the contrary! I am happy if you show me what I'm doing wrong.
I work with Illustrator CC2020 and I have not yet managed to make an SVG with a gradient
And believe me, I've done a lot of SVG's.
I'm testing your SVG tonight. if it works, can I upload the Clarion SVG to my website https://www.kayyou.ch/svg
Ok course you can, you did all the work.
And to understand what I did, just check this
- 96
- Zurich Switzerland
- timebandit67
- 249
- Paris
Ehy guys, i am about to start a 2008 Woodone Clarion ADVAN GT-R replica, but i need some decals, i wasn't able to find all of them on the internet, so i took my PS3, i started gt6 and i took some photos, they're not perfect, but they should be fine, the problem is that they're not perfectly straight, but i think that there is some wizard know how to make them look perfect
(Ebbro) please maintain the "MINIATURE MODEL by MMP" writing
View attachment 956682
(Clarion) I found the chromed clarion logo on Gran Turismo, but not in a good quality, so i hope that someone will be able to make a good version of it, but i know it's diffucult.
View attachment 956683
(Drivers names) This is not staright because this is a photo of the roof that is curved.
View attachment 956688
(Pepsi nex) on this pay attention to the lower side, that's not flat and if possible i'd like to have the decal with the white background
View attachment 956690
(Vanilla Sky) it is not pefectly horizontal
View attachment 956691
I'm sorry for the photos that aren't perfect but i tried my best and GT6 photo mode is not as good as the GT Sport one.
Obviously any kind of help is appreciated
Here your decals.
Don't have the time to make the last one yet.
- 874
- Australia
FFF Racing Team used a new font for driver names on the #19 and #555 cars in GT World Challenge Europe last weekend so I got these ready to be put into SVG format, each with the names in white and black.
Thank you in advance if you get them done!
Thank you in advance if you get them done!
krisduv
Premium
- 1,659
- France
- krisduv
You've made those files yourself choosing the font? Because if you did, you just have to do the exact same thing in inkscape or equivalent and convert the text in curves.
- 874
- Australia
Similar threads
- Sticky
