GT7 SVG request thread.

[Colin87]

I believe if you search in the showcase, you'll find guides for spacing, and fonts (letters and numbers), which will help massively.
Alternatively, Vectornator may help.

Thanks- yes I’ve created about 50 in game using the guides etc and uploaded to my gallery (Captain_Colin87) but wouldn’t mind finding a quicker way as it takes about 20-30 minutes per car.

 

[huff]

If that's the response to my request, I'm an android user, and they have no plans to release an android version according to their website...so, beeeeeeeeeeeeeer?!?

If I understand you, you have an svg where the gradient is not working? I can run it through vectornator or try to remake it for you.

 

[huff]

Thanks- yes I’ve created about 50 in game using the guides etc and uploaded to my gallery (Captain_Colin87) but wouldn’t mind finding a quicker way as it takes about 20-30 minutes per car.

View attachment 1218233

As mentioned, vectornator for iOS is an easy way to experiment for free. Also download Fontinator to be able to use any font. I would say a plate would take two minutes start to finish once you have your interfaces down.

 

[Mr Nerv]

As mentioned, vectornator for iOS is an easy way to experiment for free. Also download Fontinator to be able to use any font. I would say a plate would take two minutes start to finish once you have your interfaces down.

I'll look into that Huff, thanks!
Admittedly, GT_Jesse is having a go to finish my project, but what I've managed in Inkscape didn't keep the gradient when the decal was applied.
I'll buzz you a PM if you want to look at the start and failed result?

 

[Colin87]

As mentioned, vectornator for iOS is an easy way to experiment for free. Also download Fontinator to be able to use any font. I would say a plate would take two minutes start to finish once you have your interfaces down.

Thank you- now have both. Have absolutely no idea what I’m doing! I need to somehow import the Charles Wright Font for UK plates.. any pointers? Thank you!

 

[Mr Nerv]

Thank you- now have both. Have absolutely no idea what I’m doing! I need to somehow import the Charles Wright Font for UK plates.. any pointers? Thank you!

Look for it online, maybe as a TTF free download, as if you're on a pc - right click to 'install for all users' is the way of adding to your font files, no idea for ios though.

 

[Mr Nerv]

If I understand you, you have an svg where the gradient is not working? I can run it through vectornator or try to remake it for you.

Think I replied to the wrong message, I'll send the basic one.

 

[Drex124]

Well, that clears things up somewhat, and as mentioned - varying success has been had.
Admittedly, nothing has been from scratch, although I'm gonna give that a go with an electricity sign, but images and text has been the main way. But lesson learnt here.

2 more questions regarding text?
Can you bend a line of text once you've written it, made the object to path and saved it?
And colour gradient text, after writing something, doing the gradient colour, uploading it and it looks good - but comes out as white outlined black text, how can I save that gradient from changing once applied?

I'll apologise for being a nuisance once again, I feel.i get a better explanation here from people who do this far more often...

User Decals - A Tutorial On How To Make .SVG (Request in separate thread)

I Love colorful logos, its a shame my method just creates a messy fail. Any suggestions how to reecreate this 'one trick zebra' Funny story... must have made a start on figuring out how to draw this... then drank a bottle of whiskey... just realised I uploaded this...

www.gtplanet.net

What this post says pretty much, with the addendum that saving the final product as an optimised SVG may be another added necessary step.

 

[twitchynitch]

Could anybody help me out with this? I upload all my decals on mobile so I’m a bit limited & can’t figure this one out.

 

[SouperK]

Hi folks, has anyone got a large-ish halftone fade, i.e. circles in a grid which start small on one side and get progressively larger until they appear solid please? I had maninashed's version (miss him) and used it on a few liveries but it got deleted. Being lazy here, I could make it myself but I'm pretty sure I've seen one of you guys put something similar to use on a (gorgeous) livery recently

 

[twitchynitch]

View attachment 1218621
Could anybody help me out with this? I upload all my decals on mobile so I’m a bit limited & can’t figure this one out.

Nevermind, got ‘er done 🤟

 

[GTvsForza]

Just need the KMW, TMR and ALFA9 decals.

 

[svenhjs666]

can find this for Alfa9 supply

not the exact one saddly.


KMW

svg in attachment


Found this svg for TMR (attachment)

 

[svenhjs666]

Can somebody turn this in to svg

& if somebody is gifted to get the transparent one i would appreciate it a lot.

 

[Michael LeMay]

Could someone help me out with a SVG file? Need the attached in transparent please? I have been able to convert it to a SVG but the size always comes out to big and I can't get it to 15KB

 

[Mugo]

Hi folks, has anyone got a large-ish halftone fade, i.e. circles in a grid which start small on one side and get progressively larger until they appear solid please? I had maninashed's version (miss him) and used it on a few liveries but it got deleted. Being lazy here, I could make it myself but I'm pretty sure I've seen one of you guys put something similar to use on a (gorgeous) livery recently

I have some which aren't shared. Is this suitable? You can see the circles stretch from the wing mirrors back to the rear wing.

 

[Mugo]

Could someone help me out with a SVG file? Need the attached in transparent please? I have been able to convert it to a SVG but the size always comes out to big and I can't get it to 15KB

This is nowhere near the standard I would like, it's just a simple "trace bitmap" scan in inkscape. If I knew the fonts used I could do a far better version.

 

[Michael LeMay]

This is nowhere near the standard I would like, it's just a simple "trace bitmap" scan in inkscape. If I knew the fonts used I could do a far better version.

Thanks for your help. They were actually done for iRacing trading paints which I tried to convert.

 

[Daniel Clark]

Can anyone try and reduce this to 15kb please? And maybe remove the background stuff as well? Thanks in advance.

 

[Mr Nerv]

This is nowhere near the standard I would like, it's just a simple "trace bitmap" scan in inkscape. If I knew the fonts used I could do a far better version.

Online font finder, Mugo? You may be able to drop the picture in one of those and get the result.
Well, possibly! It's what I've been doing recently.
That reminds me, could you trace the bitmap of a single part of a logo? I have the text bit, and successfully got the black swirl, but the orange bit is providing to be a pain file size wise, even after stripping the layers, and sits at 155kb.

 

[Mugo]

That reminds me, could you trace the bitmap of a single part of a logo? I have the text bit, and successfully got the black swirl, but the orange bit is providing to be a pain file size wise, even after stripping the layers, and sits at 155kb.

I tried the two main online services with no luck.

What image are you referring to?

 

[Mr Nerv]

I tried the two main online services with no luck.

What image are you referring to?

I'll get back to you when I sling my pc on. One was FindaFont.something I think, the other one was of a similar name and the next match on Google I guess. I'll look today, as it's just gone midnight...

 

[SouperK]

View attachment 1218850

I have some which aren't shared. Is this suitable? You can see the circles stretch from the wing mirrors back to the rear wing.

That would be brilliant, it's even bigger than I was expecting (as the actress said to the bishop ), thank you so much It's a gorgeous livery too!

 

[MidnightRun85]

Anyone able to make the 7TSix Racing logo for me? (Minus the car aerial sticking up through the middle of the pic please!)

 

[huff]

Anyone able to make the 7TSix Racing logo for me? (Minus the car aerial sticking up through the middle of the pic please!)

I tried to straighten it out a bit, hope this works for you.

 

[MidnightRun85]

I tried to straighten it out a bit, hope this works for you.

Perfect, thanks @huff !!

 

[Andy_EVO432]

Could someone do these two for me please. I'd like these two without any background and I intend to use them in white so the colour is not important.

Thanks!

 

[krisduv]

Could someone do these two for me please. I'd like these two without any background and I intend to use them in white so the colour is not important.

Thanks!

View attachment 1219162

 

[Andy_EVO432]

Thanks very much @krisduv, great stuff as usual.

 

[Raphaele]

Maybe someone has got this one in stock for me:


@krisduv ?