Logitech G Pro Racing Wheel

[ploppen]

Thanks for the response LOGI_rich

- yes it’s present in all modes

- and yes i loss FFB always in the same corners on différents tracks.

- I’m not using any custom car setup

- yes i run with all assists off.
Before they released a patch 2 weeks ago ( more or less) it works perfectly and i don’t change anything.
Today i tested F1 24 on the Xbox séries x and the same problem.
Thanks again for the answer

Not being a logitech expert, but to me, the problem must be in the game itself.
It worked fine, the game was patched and ffb now is different but works in other titles.

Shouldn’t that be adressed to the company making the game and implementing the Logitech ffb-api, i doubt there anything Logitech can do about it.

But thats just my guess.

 

[Bacchanalist]

I got the Pro Wheel with Pro Pedals and the RS Shifter & Handbrake but the shifter doesn´t work in GT7.

The firmware of the shifter is the latest and it´s recognized and working on my PC in G Hub.

However, in GT7 it doesn´t work. I plugged the shifter in a USB-Port of the base (like the pedals), put the switch on the shifter in shifter mode and screwed the bar in the blue marked hole.

The shifter neither works in the options configuration nor in a car on track. Same situation if I switch to handbrake mode.

Does somebody know what I´m doing wrong?

 

[LOGI_Rich]

Check that you’re on a recent enough version of G HUB. You need to be on at least 2024.4 (if I remember correctly) to get the newer version of the wheel firmware but the latest version is 2024.9. You’ll know if you’re on the right version because in handbrake axis mode it’ll actuate the handbrake test bar on the OLED.

 

[Bacchanalist]

G Hub Version is 2024.8.64186
RS Shifter Version is 13.03.13
None of them is updateable.

Do You mean the OLED on the base on Modus "Test" with the 6 functions (C, B, G, H, AA, AB)?
So it´s Clutch, Brake, Gas, Handbrake right?
But what measn AA and AB?

However, only Clutch, Brake and Gas does react, the other three bars doesn´t move.

 

[Bacchanalist]

I fixed it:

I checked wheel and shifter seperately in G Hub with not firmware update options.

I had to plug the shifter to the base and the base to my PC and then I got the firmware update.

After the update shifter is working in GT7.

Thank you for your quick support @LOGI_Rich

 

[DivitLad]

I bought the RS wheel hub and I'm not wanting to use it down to the rattling buttons or whatever it is, much noiser than the standard wheel, What went wrong in making these? cheaper materials? Anyone not having this issue and should I rma it? , Even the X button on my original wheel going rattly, For that kind of money this is not good.

 

[Oshawa-Joe]

I bought the RS wheel hub and I'm not wanting to use it down to the rattling buttons or whatever it is, much noiser than the standard wheel, What went wrong in making these? cheaper materials? Anyone not having this issue and should I rma it? , Even the X button on my original wheel going rattly, For that kind of money this is not good.

It happens when you have trueforce turned up too high. It's the high frequency vibrations. I keep trueforce turned down a bit to prevent masking what is more important, the FFB for tire grip and weight transfer. I still feel everything from trueforce, it's just not cranked up to buttkicker levels. I use a buttkicker for that. The benefit is very little if any perceived button rattling from the high frequencies.

But if it bothers you, yeah send it back.

 

[hawkeyez]

Does anybody know if trueforce (turning up vibration in GT7) makes the wheel heavier or is it just vibrations?

 

[Oshawa-Joe]

Does anybody know if trueforce (turning up vibration in GT7) makes the wheel heavier or is it just vibrations?

I only sense an increase in intensity of the high frequencies.

 

[Alex-ffm]

I ordered one week ago the RS shifter directly on Logitech website and since then I never received any shipment notifications (just order notification). I expected Logitech to be but faster then that. Bit disappointing….. the support is also not responding whether on my emails nor on contact attempts via the chat support

 

[NicoGmbh]

15 days waiting because it was missing a USB to micro USB cable with my pedal board.
Answer: return all products (pedal + base !!!), we refund you within 3 weeks and you can order another one !
I helped myself by buying a cable.
Patience...

 

[DivitLad]

I ordered one week ago the RS shifter directly on Logitech website and since then I never received any shipment notifications (just order notification). I expected Logitech to be but faster then that. Bit disappointing….. the support is also not responding whether on my emails nor on contact attempts via the chat support

They're busy, taking a week from order to receiving it for my rs hub and wheels. don't get notification till it is shipped