- 313
- Puerto Rico
- snowmanpr
It all starts with a dream...
And my 13B-powered Miata, right-hand drive edition
And my 13B-powered Miata, right-hand drive edition
What stats does the Pontiac have to compete with Gr.4 cars? Must be tricky since it can't generate any front downforce?Pepsi Mustang GT-4
View attachment 1170605
And my Pontiac Firebird 1978 GT-4
View attachment 1170606
Thought the same thing when I tuned it, but I just won the le Mans 30 minutes with it, it has 699 PP. Surprisingly enough, even with no front down force and 130 rear (just to keep the rear from getting too light) it can keep up with the Group-4 cars even in the corners, with racing hards.What stats does the Pontiac have to compete with Gr.4 cars? Must be tricky since it can't generate any front downforce?
Some of these are absolutely stunning. That EvoContinuing my JDM build showcase (now gonna add in some description because why not just to add some spice to my builds and doing a little pretend game with the parts used especially in the performance side plus the description thing I was inspired by this).
JDM build #21
2018 Subaru BRZ STI Sport. It's already tuned by the folks at STI so we decided to add more by adding a custom body kit, 18 inch Enkei NT03RRs, and a Voltex wing. This car has been dipped also with the Gran Blue Mica paint. We enhanced its performance by adding various Auto Produce Boss parts such as the ECU, turbo, exhaust, and intake manifold. To finish this build off a custom Prodrive suspension and Potenza RE71RS tires has been installed on the BRZ.
View attachment 1170753
View attachment 1170754
JDM build #22
This '98 Evo gets fitted with custom fenders, 18 inch Enkei RP03s, custom Varis front splitter and side skirts including a Ings+1 wing. We gave it a coat of Dandelion Yellow on this Evo and for the performance side of the car we added a HKS turbocharger, Mantic clutch, Aragosta suspension, Airaid air fliter, Armytrix exhaust, and Nankang AR1 tires. This ride here is ready to show off for a car show.
View attachment 1170755
View attachment 1170756
JDM build #23
1995 Integra Type-R. We went for a K Tuned build for this one with most of the parts coming from K Tuned save for a Flowmaster exhaust, Edelbrock turbo kit, custom Intrax suspension kit, and Motec ECU. Lowered the car by 3 inches then we finish it off with a carbon finish paint, custom kit and wing, Dunlop tires, and some Spoon SW388s.
View attachment 1170757
View attachment 1170758
JDM build #24
This Nissan R32 Skyline gets the Autech treatment with the aero parts, a GT wing, and 18 inch Volk Racing C345 Primes. We then tuned it up with a custom Kei Office suspension kit, Injen air intake, Fujitsubo exhaust, Brembo brakes, custom Hewland transmission, Bridgestone Potenza tires, and to top it off a HKS high RPM turbocharger has been installed to make this a speed demon.
View attachment 1170759
View attachment 1170760
JDM build #25
2021 Subaru BRZ. We made this build to commemorate Subaru's GT300 title win from last season's Super GT. Started it off by giving it a custom body kit along with STI aero parts and a lip spoiler plus 18 inch BBS RE-V7s and dropped it as well. For the performance we did a engine swap by replacing the stock engine with a 2JZ engine sourced from a Toyota Supra we have in our garage and then beefed it up with a GReddy turbocharger plus a FI exhaust, Grams Performance parts, custom Prodrive suspension kit, Sailun tires, and Brembo brakes. Then we finish this build off by painting it in WR Blue Mica along with a stripe that is similar to the BRZ GT300's stripe and there you have it a dedication build.
View attachment 1170761
View attachment 1170762
That Evo is amazing! Could you please share a link??Continuing my JDM build showcase (now gonna add in some description because why not just to add some spice to my builds and doing a little pretend game with the parts used especially in the performance side plus the description thing I was inspired by this).
JDM build #21
2018 Subaru BRZ STI Sport. It's already tuned by the folks at STI so we decided to add more by adding a custom body kit, 18 inch Enkei NT03RRs, and a Voltex wing. This car has been dipped also with the Gran Blue Mica paint. We enhanced its performance by adding various Auto Produce Boss parts such as the ECU, turbo, exhaust, and intake manifold. To finish this build off a custom Prodrive suspension and Potenza RE71RS tires has been installed on the BRZ.
View attachment 1170753
View attachment 1170754
JDM build #22
This '98 Evo gets fitted with custom fenders, 18 inch Enkei RP03s, custom Varis front splitter and side skirts including a Ings+1 wing. We gave it a coat of Dandelion Yellow on this Evo and for the performance side of the car we added a HKS turbocharger, Mantic clutch, Aragosta suspension, Airaid air fliter, Armytrix exhaust, and Nankang AR1 tires. This ride here is ready to show off for a car show.
View attachment 1170755
View attachment 1170756
JDM build #23
1995 Integra Type-R. We went for a K Tuned build for this one with most of the parts coming from K Tuned save for a Flowmaster exhaust, Edelbrock turbo kit, custom Intrax suspension kit, and Motec ECU. Lowered the car by 3 inches then we finish it off with a carbon finish paint, custom kit and wing, Dunlop tires, and some Spoon SW388s.
View attachment 1170757
View attachment 1170758
JDM build #24
This Nissan R32 Skyline gets the Autech treatment with the aero parts, a GT wing, and 18 inch Volk Racing C345 Primes. We then tuned it up with a custom Kei Office suspension kit, Injen air intake, Fujitsubo exhaust, Brembo brakes, custom Hewland transmission, Bridgestone Potenza tires, and to top it off a HKS high RPM turbocharger has been installed to make this a speed demon.
View attachment 1170759
View attachment 1170760
JDM build #25
2021 Subaru BRZ. We made this build to commemorate Subaru's GT300 title win from last season's Super GT. Started it off by giving it a custom body kit along with STI aero parts and a lip spoiler plus 18 inch BBS RE-V7s and dropped it as well. For the performance we did a engine swap by replacing the stock engine with a 2JZ engine sourced from a Toyota Supra we have in our garage and then beefed it up with a GReddy turbocharger plus a FI exhaust, Grams Performance parts, custom Prodrive suspension kit, Sailun tires, and Brembo brakes. Then we finish this build off by painting it in WR Blue Mica along with a stripe that is similar to the BRZ GT300's stripe and there you have it a dedication build.
View attachment 1170761
View attachment 1170762
I love these designs, care to share the links to download?Continuing my JDM build showcase (now gonna add in some description because why not just to add some spice to my builds and doing a little pretend game with the parts used especially in the performance side plus the description thing I was inspired by this).
JDM build #21
2018 Subaru BRZ STI Sport. It's already tuned by the folks at STI so we decided to add more by adding a custom body kit, 18 inch Enkei NT03RRs, and a Voltex wing. This car has been dipped also with the Gran Blue Mica paint. We enhanced its performance by adding various Auto Produce Boss parts such as the ECU, turbo, exhaust, and intake manifold. To finish this build off a custom Prodrive suspension and Potenza RE71RS tires has been installed on the BRZ.
View attachment 1170753
View attachment 1170754
JDM build #22
This '98 Evo gets fitted with custom fenders, 18 inch Enkei RP03s, custom Varis front splitter and side skirts including a Ings+1 wing. We gave it a coat of Dandelion Yellow on this Evo and for the performance side of the car we added a HKS turbocharger, Mantic clutch, Aragosta suspension, Airaid air fliter, Armytrix exhaust, and Nankang AR1 tires. This ride here is ready to show off for a car show.
View attachment 1170755
View attachment 1170756
JDM build #23
1995 Integra Type-R. We went for a K Tuned build for this one with most of the parts coming from K Tuned save for a Flowmaster exhaust, Edelbrock turbo kit, custom Intrax suspension kit, and Motec ECU. Lowered the car by 3 inches then we finish it off with a carbon finish paint, custom kit and wing, Dunlop tires, and some Spoon SW388s.
View attachment 1170757
View attachment 1170758
JDM build #24
This Nissan R32 Skyline gets the Autech treatment with the aero parts, a GT wing, and 18 inch Volk Racing C345 Primes. We then tuned it up with a custom Kei Office suspension kit, Injen air intake, Fujitsubo exhaust, Brembo brakes, custom Hewland transmission, Bridgestone Potenza tires, and to top it off a HKS high RPM turbocharger has been installed to make this a speed demon.
View attachment 1170759
View attachment 1170760
JDM build #25
2021 Subaru BRZ. We made this build to commemorate Subaru's GT300 title win from last season's Super GT. Started it off by giving it a custom body kit along with STI aero parts and a lip spoiler plus 18 inch BBS RE-V7s and dropped it as well. For the performance we did a engine swap by replacing the stock engine with a 2JZ engine sourced from a Toyota Supra we have in our garage and then beefed it up with a GReddy turbocharger plus a FI exhaust, Grams Performance parts, custom Prodrive suspension kit, Sailun tires, and Brembo brakes. Then we finish this build off by painting it in WR Blue Mica along with a stripe that is similar to the BRZ GT300's stripe and there you have it a dedication build.
View attachment 1170761
View attachment 1170762
Dude this livery on another car is perfect for our new livery contest!
I'd have submitted it if it followed the rules but alas the rules only allow Gr.4 cars + Roadster TC, Silvia TC, Civic TC and WRX TT. Which I think is a bit too restrictive but what are you gonna do?Dude this livery on another car is perfect for our new livery contest!
The GT7 Livery Editor Competition #05 (Touring Car Revival) - CLOSED
Touring Car Revival THIS MONTH'S THEME Touring Cars. For many the pinnacle of racing and even today still always a safe bet for great action on and off the track. For this month's competition you're asked to revive your favourite touring car livery on a Gr.4 car, be it DTM, BTCC, JGTC, V8...www.gtplanet.net