Assetto Corsa PC Mods General DiscussionPC

[Haunebu52]

Hey everyone, quick question… I know someone was working on either upgrading or rebuilding Beez. Was that ever posted? Or have there been any updates? Love this track, but it has many issues in its current state. Thanks!

 

[YOMISMODEMI]

View attachment 1299442

thanks a lot!!! in case anyone having the same issue, tick "normalize uv mapping"

 

[sab001]

I updated the Huracan Evo 2 skin to eliminate the green marker showing up in the rim blur... (back 2 pages for updated link for the skin).


** OR ** Unzip & Drop this file (Blur_X.dds) into the skin directory replacing the existing file.

And this other one to get rid of the handwriting on the tire...(directional arrows are wrong on one side duh) (unzip, drop into skin dir and replace)

(original post already has these updates now)

 

[jac0]

Thank you for the report.
I do not have VR so I could not check the flickering of the building.
Can you tell me which building is the problem?

It's mostly the big hangars, the flight control tower ...

I could eliminate most of the disturbing distant flickers by hiding these:
[MESH_ADJUSTMENT_...]
MESHES = halle14.002, halle1_1, tower.011, halle14
IS_RENDERABLE = 0

Still there is some flickering on the base of the flight control tower and also the first camera tower you meet after starting line.

Another 2 things worth mentioning about this flickering issue:
1) it only happens when at a certain distance from the object... when I come closer it stops doing that
2) also when I switch to free camera (F7) , and move outside of the cockpit the flickering stops , even though still far from the buildings

 

[maximeerkat]

RENAULT CLIO UK CUP 3 SKINS 2K/4K/6K

OG mod creator: Shokeus

2 skins are loose replica's and the dark blue is fictional but in keeping with the rest. A big shoutout to Low-life drift mafia over at discord for sorting the window AO out for me in 3d software and other bits and bobs that i do not understand without him i would not of skinned this car, if it has no window map it wont get skinned by me, its that simple.

the entire car is in my download due to changing a few shader values and an updated kn5 file

the lower res skins are in the cars main folder under "lower_res_skins" if you want a 4k or 2k, default fitted is 6k

i have put an ext_config file in all skins to remove the rear wiper arm (on track) due to the wiper arm getting splats of paint over it when the mouldings are painted there is nothing i can do about this it is a poor mapping issue, also the tops of the rear lights get a lovely line of paint because they are also mapped along with the side mouldings, of course i cant hide the rear lights for obvious reasons so i decided to roll with it as i do not like the side plates without the painted mouldings, if you would rather have the wiper arm back remove the ext_config from the skins folder thats all that file does nothing more. If you wanted all mouldings black and no splashes of paint on the rear wiper arm/rear lights remove the ext_config and also remove the "rgba#010101ff.dds" file but be warned this will remove all colour from the mouldings and leave them black. You can pick and choose what you do and do not want.

drag and drop into CM to install.

sweet as nut 🍻

 

[FerrariFan9]

Hey I was wondering if anyone could make or has a 30+ pit stall version of Hertha's Gateway oval?

 

[Fanapryde]

Hey everyone, quick question… I know someone was working on either upgrading or rebuilding Beez. Was that ever posted? Or have there been any updates? Love this track, but it has many issues in its current state. Thanks!

There's the Ytanguy, Neel Jani version converted by Sliderman. Still WIP, but personal matters are in the way of further development lately. Last changes are from late July. It does look good already, but it's going to be a while before it will get published I'm afraid.

 

[jac0]

Happy Halloween everyone!

I was tinkering around for fun, but I could not get the ai to perform normally...

DOWNLOAD
(drag and drop in CM- does not overwrite any existing cars)

 

[MrHunt]

I have 0.180 442 and newest pure and if im take a screenshot the sky turns black, does anyone know what this is and how to get rid of it?

 

[Fanapryde]

I have 0.180 442 and newest pure and if im take a screenshot the sky turns black, does anyone know what this is and how to get rid of it?

Sadly no, but you're in luck. I know guys where the sky turns black when driving...

 

[jac0]

made 3 extra skins for the "Ford SuperVan3 Donut Media 1994" (cky_ford_supervan3_donut) v1.0 by Ceky Performance

(beware : original v1.0 extension/ext_config.ini is included in my archive and altered slightly - to set the original skin names by name instead of ? )
If you have altered something to the extension\ext_config.ini already, do not use drag&drop in CM, but only copy over the skins and make manual adjustment to the extension\ext_config.ini file:
changeing
SKINS = ?
into
SKINS = "Donut Media", "Vericu Sport Tuning Racing Performance"

(else my chameleon paint won't stick... )

DOWNLOAD

 

[Haunebu52]

There's the Ytanguy, Neel Jani version converted by Sliderman. Still WIP, but personal matters are in the way of further development lately. Last changes are from late July. It does look good already, but it's going to be a while before it will get published I'm afraid.

View attachment 1299474

Thank you for the update! Was there ever a WIP posted or was it just updates and screenshots? I'm new and still adjusting to finding posts in a single 4110 page thread lol - hopefully it gets finished at some point, it's a wildly underrated track.

 

[maximeerkat]

pinstriping re-done on the passenger side rear of the dark blue clio, i totally missed it my bad 🤓. i have updated the download. no other changes were made. so if it doesn't bother you then disregard this "fix"

 

[Fanapryde]

Thank you for the update! Was there ever a WIP posted or was it just updates and screenshots? I'm new and still adjusting to finding posts in a single 4110 page thread lol - hopefully it gets finished at some point, it's a wildly underrated track.

No, nothing about this version has been posted yet. No screenshots either. The one I included is the first one

 

[leopardpete]

Here goes. My skin, for carToons Citta di Aorta which captures the vintage Targa Florio mood, especially at night with CrisT86's fantastic lighting additions.

I created some simple skin changes to give it a more 60s/70s Italian feel, as well upscaling street level textures for a better visual experience. Nothing as clever as the work done by Racinjoe, Rainmaker etc but I hope this skin will make the experience of driving this great track even more enjoyable.

Changes include:

• dirtying of road texture on the edges to simulate accumulated dirt and oild drops from parked Fiat 500s
• altering the colour/shade of the road surafce and sidewalk surface to create a greater distinction between the two
• lowering the luminosity of many street level textures - trying to create a more FatAlfie-like™ feel where textures aren't super bright and unrealistic
• changing most of the French shops names to Italian (using Google translate, so let me know if inaccurate)
• I don't know if the track is set in a particular time period but the 1980s on American ambulance & fire engine weren't working for me as a 50s to 70s period track. At first I removed them both, but decided it was a bit bare at the start so brought the fire track back but tried to make it look a bit more '60s - ideally I would love to inject vintage style kn5s in their place, but I haven't yet figured out how to go about doing that.
• a new banner at the start/finish
• upscaling of building face textures - they are so close to the car view

Permission kindly given by carTOON to post my skin. Let me know what your thoughts, but go easy on me...

https://www.gtplanet.net/forum/downloads/cartoon-città-di-aorta-leopard-skin.6708/

 

[giorgos_nes]

Hi everyone.
Just a question about the RSS Mercer (Mercedes AMG GT3 Evo). Is there some kind of AI fix for it? The AI drives -more than often- off the track at many circuits (for example T2 in Monza).

 

[Quark67]

@

leopardpete​

Some better translations

competizioneflag.dds Circuito Città di Aorta
riv03c.dds Immobiliare Leopardi
riv06h.dds Bar Centrale
riv07i.dds Farmacia
riv12k.dds Architecture d'Interieur=Mobilificio, Decoration=Decorazioni, Tapesserie=Tappeti
riv16c.dds Bar (Caffetteria is a modern name)
riv15d.dds Frutta e Verdura
riv16d.dds Gucci (without the GC, it's a modern logo)
riv21j.dds Municipio
riv26d.dds Macelleria
riv30e.dds Ambulatorio Medico
riv41h.dds Fotografo

 

[leopardpete]

@

leopardpete​

Some better translations

competizioneflag.dds Circuito Città di Aorta
riv03c.dds Immobiliare Leopardi
riv06h.dds Bar Centrale
riv07i.dds Farmacia
riv12k.dds Architecture d'Interieur=Mobilificio, Decoration=Decorazioni, Tapesserie=Tappeti
riv16c.dds Bar (Caffetteria is a modern name)
riv15d.dds Frutta e Verdura
riv16d.dds Gucci (without the GC, it's a modern logo)
riv21j.dds Municipio
riv26d.dds Macelleria
riv30e.dds Ambulatorio Medico
riv41h.dds Fotografo

Grazie - I'll update this evening and upload tomorrow

 

[Perico Lospa]

RENAULT CLIO UK CUP 3 SKINS 2K/4K/6K...

Wow, thanks a lot; that car brings me bittersweet memories; a long, long time ago I had a Renault Clio S (just married, I didn't have enough dough to buy the 16v), just like that one...

... 92 pure, raw, rabid and french horsepower, my first car brand new paided with my (and my wife's) hard earned money, a fun little car with which I had a lot of fun, but ended up giving me a lot of electrical and refrigeration problems, hence the bittersweet memories... although I must admit that being young and inexperienced, it´s possible that the maintenance of the car was not as correct as it should have been... 😬

And after this nostalgic parenthesis, let's get down to business... I like the mod a lot: good looking, drives well, sound is more than correct... but I have seen a couple of small flaws, not at all important, that is, and I know that one of them is not your responsibility, but I'm mentioning it in case anyone would like to correct them.

As it can be seen in the image, circled in red...

... when turning fully, the front tires overlap the wheel arch and bumper, and the rear glass stickers also overlap improperly when viewed with the F5 camera. As said, and since I always drive in first view, these details aren't deal breakers, but it wouldn't be bad if they could be corrected.

By the way, the download folder includes a kn5 and data backups... They are different versions than the final ones, or you have simply forgotten to delete them before uploading the mod?

Thanks again!

 

[jac0]

Made an updated reworked chameleon skin for the updated BMW M4 GT4 G82 (v0.992) by Guerilla Mods

(no longer needs changes in the main ext_config.ini to work , just drag&drop in CM will install the skin without modifying any of the original files of the mod)
DOWNLOAD

for some reason the rims are not showing the correct color in the preview though...
in the video they are showing more as they do in-game:

 

[sab001]

Did a final touchup on the Leipert Huracan skin. (the yellows were weirding) Changed the helmet. I'm done (Link below)
V4 update. Got the names right. Thanks, Frank23 (jk!)

Assetto Corsa PC Mods General Discussion

yes indeed , good direction I think ... (updated the original post w more info on these)... Still need to figure out how to solve it though... maybe will try higing the one for the blur and see what that does. Thanks! could try [MESH_ADJUSTMENT_...] MESHES = meshes IS_ACTIVE = 0

www.gtplanet.net

 

[MrHunt]

Wow, thanks a lot; that car brings me bittersweet memories; a long, long time ago I had a Renault Clio S (just married, I didn't have enough dough to buy the 16v), just like that one...

View attachment 1299564

... 92 pure, raw, rabid and french horsepower, my first car brand new paided with my (and my wife's) hard earned money, a fun little car with which I had a lot of fun, but ended up giving me a lot of electrical and refrigeration problems, hence the bittersweet memories... although I must admit that being young and inexperienced, it´s possible that the maintenance of the car was not as correct as it should have been... 😬

And after this nostalgic parenthesis, let's get down to business... I like the mod a lot: good looking, drives well, sound is more than correct... but I have seen a couple of small flaws, not at all important, that is, and I know that one of them is not your responsibility, but I'm mentioning it in case anyone would like to correct them.

As it can be seen in the image, circled in red...

View attachment 1299568

... when turning fully, the front tires overlap the wheel arch and bumper, and the rear glass stickers also overlap improperly when viewed with the F5 camera. As said, and since I always drive in first view, these details aren't deal breakers, but it wouldn't be bad if they could be corrected.

By the way, the download folder includes a kn5 and data backups... They are different versions than the final ones, or you have simply forgotten to delete them before uploading the mod?

Thanks again!

I see a much more severe bug, look at the textures of the tires, they don't close, you can see the inner circle and the rest of the texture for the tread, which is angular!

 

[thunder72fr]

I love Assetto:

 

[maximeerkat]

Wow, thanks a lot; that car brings me bittersweet memories; a long, long time ago I had a Renault Clio S (just married, I didn't have enough dough to buy the 16v), just like that one...

View attachment 1299564

... 92 pure, raw, rabid and french horsepower, my first car brand new paided with my (and my wife's) hard earned money, a fun little car with which I had a lot of fun, but ended up giving me a lot of electrical and refrigeration problems, hence the bittersweet memories... although I must admit that being young and inexperienced, it´s possible that the maintenance of the car was not as correct as it should have been... 😬

And after this nostalgic parenthesis, let's get down to business... I like the mod a lot: good looking, drives well, sound is more than correct... but I have seen a couple of small flaws, not at all important, that is, and I know that one of them is not your responsibility, but I'm mentioning it in case anyone would like to correct them.

As it can be seen in the image, circled in red...

View attachment 1299568

... when turning fully, the front tires overlap the wheel arch and bumper, and the rear glass stickers also overlap improperly when viewed with the F5 camera. As said, and since I always drive in first view, these details aren't deal breakers, but it wouldn't be bad if they could be corrected.

By the way, the download folder includes a kn5 and data backups... They are different versions than the final ones, or you have simply forgotten to delete them before uploading the mod?

Thanks again!

i love hearing the personal stories of people who owned these car's and have lived with them for a number of years, is the photo of the white one you shared of your actual car? if it is it looks brand new!

a good freind of mine was/still is a reanult NUTJOB he owns the fastest n/a clio mk1 in the uk (at the time) 251 WHP its the most savage thing i been in even the genuine cup cars only had roughly 200bhp. he has spent vast sums of money and time on this car so even though i never owned a clio it was still a trip down memory lane for me, i am glad it took you down memory lane to


now lets get down to business i have no idea how to stop the overlap on the windows i have noticed it but no idea how to sort that i have seen this issue on other paid mods so maybe it is just the way the game handles it?

if the wheel is clipping the wheel arch raise the suspension up a little, maybe add a bit of negative camber if it does not bork the handling up and the kn5 i am not sure what you mean the kn5 is the 3d model the data file is the data file.........


edit i adjusted the height a little and now no clipping i gone a bit to much i could go a bit lower again and have no issues still

 

[Pfalzdriver]

Nothing to see here, just another update

Did my final test run with the Porsch today and decided afterwards, its now good as it is. Many, many things were touched again, many minor problems solved, the biggest one was the downforce. Id like to thank @TonyBarracuda for pointing me to this issue. Now the car has proper 75kg of downforce at max speed.

Source: https://www.total911.com/1976-934-le-mans-winner/

Here just a quick overview of the changes, but tbf this list had to be a lot longer. I've made so many changes, the car drives now completely differently ... but that doesnt mean its easier to drive.

Version 1.5 by Pfalzdriver
- Decreased downforce to proper 75kg at max speed
- Reduced gear count to four
- Corrected tire size with optimised physics by Arch
- Adjusted brake torgue to match real braking distances
- Minor adjustments to suspension and engine curve, adjustable turbo
- Some fixes and additions to model and extension, e.g. rain tires textures

You can download the car as usual here at GTPlanet or Sharemods.

And please, stop finding any more errors! And yes, I know, rain tires in this area were not marked in blue. I couldnt find any picture with someone crazy enough driving the beasty in the wets. Its just a texture (in extension), so feel free to change it to your liking.

Oh, nearly forgot: Please make a new installation! I had to change two folder names in the skins of @MrHunt which contained "Umlaute." Is there even an english word for that?
Assetto Corsa doesnt have a problem with "Umlaute" tho, but an App we use for multiplayer racing does. It has the tendency to kick people from the server, so I usually avoid "Umlaute."

 

[ApexVGear]

Download link in the description (this is not my mod).

 

[RedEye Racing]

made 3 extra skins for the "Ford SuperVan3 Donut Media 1994" (cky_ford_supervan3_donut) v1.0 by Ceky Performance

(beware : original v1.0 extension/ext_config.ini is included in my archive and altered slightly - to set the original skin names by name instead of ? )
If you have altered something to the extension\ext_config.ini already, do not use drag&drop in CM, but only copy over the skins and make manual adjustment to the extension\ext_config.ini file:
changeing
SKINS = ?
into
SKINS = "Donut Media", "Vericu Sport Tuning Racing Performance"

(else my chameleon paint won't stick... )

DOWNLOAD

View attachment 1299500
View attachment 1299501
View attachment 1299502

Hello! How are you? I would like to know how to create this type of skin. I just change colors with mipmap, but I would like a tutorial. Congratulations. The skins were great.

 

[Frank25]

Did a final touchup on the Leipert Huracan skin. (the yellows were weirding) Changed the helmet. I'm done (Link below)

View attachment 1299625

Assetto Corsa PC Mods General Discussion

yes indeed , good direction I think ... (updated the original post w more info on these)... Still need to figure out how to solve it though... maybe will try higing the one for the blur and see what that does. Thanks! could try [MESH_ADJUSTMENT_...] MESHES = meshes IS_ACTIVE = 0

www.gtplanet.net

Thank your for the skin, but there is no difference between V2 and V3. When and at what race with the drivers Brendon Leitch and Keromg Li was this livery used in the 2022 GTWC Europe? I could only find the info, that Leipert Motorsport used a Lamborghini Huracan GT3 Evo (NOT Evo2) in the 2022 GTWC Europe endurance cup, but without the driver Keromg Li.

Leipert Motorsport 2022, Lamborghini Huracan GT3 Evo

Leipert Motorsport team information. Car entered Lamborghini Huracan GT3 Evo

www.gt-world-challenge-europe.com

 

[Masscot]

Nothing to see here, just another update

Did my final test run with the Porsch today and decided afterwards, its now good as it is. Many, many things were touched again, many minor problems solved, the biggest one was the downforce. Id like to thank @TonyBarracuda for pointing me to this issue. Now the car has proper 75kg of downforce at max speed.

Source: https://www.total911.com/1976-934-le-mans-winner/

Here just a quick overview of the changes, but tbf this list had to be a lot longer. I've made so many changes, the car drives now completely differently ... but that doesnt mean its easier to drive.

Version 1.5 by Pfalzdriver
- Decreased downforce to proper 75kg at max speed
- Reduced gear count to four
- Corrected tire size with optimised physics by Arch
- Adjusted brake torgue to match real braking distances
- Minor adjustments to suspension and engine curve, adjustable turbo
- Some fixes and additions to model and extension, e.g. rain tires textures

You can download the car as usual here at GTPlanet or Sharemods.

And please, stop finding any more errors! And yes, I know, rain tires in this area were not marked in blue. I couldnt find any picture with someone crazy enough driving the beasty in the wets. Its just a texture (in extension), so feel free to change it to your liking.

Oh, nearly forgot: Please make a new installation! I had to change two folder names in the skins of @MrHunt which contained "Umlaute." Is there even an english word for that?
Assetto Corsa doesnt have a problem with "Umlaute" tho, but an App we use for multiplayer racing does. It has the tendency to kick people from the server, so I usually avoid "Umlaute."

View attachment 1299641View attachment 1299642View attachment 1299643View attachment 1299644View attachment 1299645

Any chance the gearstick shaft could be shortened so that the hand grips the gearknob during shifting? A two-min job in Blender would be time very well spent for any VR users.

Edit: or try this attached animation, which is closer to the gearknob has less clipping.

@Pfalzdriver add this to the config to stop sunlight lighting up the footwells through what should be solid objects:

;stop sun in footwells
[SHADER_REPLACEMENT_...]
ACTIVE = 1
MATERIALS = INT_DETAILS, EXT_CARPAINT, INT_COURO
CAST_SHADOWS = 1
DOUBLE_FACE_SHADOW_BIASED = 1

 

[sab001]

Thank your for the skin, but there is no difference between V2 and V3. When and at what race with the drivers Brendon Leitch and Keromg Li was this livery used in the 2022 GTWC Europe? I could only find the info, that Leipert Motorsport used a Lamborghini Huracan GT3 Evo (NOT Evo2) in the 2022 GTWC Europe endurance cup, but without the driver Keromg Li.

Leipert Motorsport 2022, Lamborghini Huracan GT3 Evo

Leipert Motorsport team information. Car entered Lamborghini Huracan GT3 Evo

www.gt-world-challenge-europe.com

• The touchups to the paint (v2-v3) may not be readily apparent... I tilted the yellows toward reddish (from greenish) and mini-glitches were removed. (The standard pit animation for the car revealed some crap under the doors)
• as shown below they were present in 2022 and 2023, but you are right about the drivers. I'll fix that. I just picked names from the website. I probably got the 1st name/ last name wrong too. Dang.
• Right, Leipert didn't get the Evo2 until 2023. (It came out in may 2022 though so pretend they got it) I wasn't doing a skin for the Evo though (So squint, eh) That red/silver eagle motif they used for 2023 wasn't so appealing, and looked really hard to do. I'm the bang out a skin cuz there isn't any guy
• names are now fixed (V4) Thanks Frank25. Sometimes I get lazy. and Yes, there's definately a difference. Look CLOSER... changed hues-tiny-touchup and the helmet were changed (v3 had the yellow helmet)

Assetto Corsa PC Mods General Discussion

yes indeed , good direction I think ... (updated the original post w more info on these)... Still need to figure out how to solve it though... maybe will try higing the one for the blur and see what that does. Thanks! could try [MESH_ADJUSTMENT_...] MESHES = meshes IS_ACTIVE = 0

www.gtplanet.net