Assetto Corsa PC Mods General DiscussionPC
- Thread starter daan
- 138,736 comments
- 37,919,977 views
- 393
- United States
Sorry I don't have an answer for you but the developer has a support forum at http://sim-garage.co.uk/
where you may get some answers as well.
- 608
- World
do you still remember Espace F1 converted by me?
so, I have compared three versions of this magic car
1 - by me - shaders are weak. sound pretty well, but not very good. drivability is okay.
2 - updated by Legion - was removed abs and TC, but original car have both. drivability was not changed much, shaders became better a little bit
3 - by RTM - I must say true, it's best version, still. Shaders like kunos cars, sound is a pleasure for ears. Only one mistake: lcd screen is not like original car, so lcd screen is better from my version. Physics is different to my and legion. Lack of front downforce, but probably (no one has tested it in real) its more close to real version of this super van.
So RTM version win. Unfortunately not all car by RTM are so good. Last disappointment was GT300 Garaya, when tyre moved through the arch when steering
so, I have compared three versions of this magic car
1 - by me - shaders are weak. sound pretty well, but not very good. drivability is okay.
2 - updated by Legion - was removed abs and TC, but original car have both. drivability was not changed much, shaders became better a little bit
3 - by RTM - I must say true, it's best version, still. Shaders like kunos cars, sound is a pleasure for ears. Only one mistake: lcd screen is not like original car, so lcd screen is better from my version. Physics is different to my and legion. Lack of front downforce, but probably (no one has tested it in real) its more close to real version of this super van.
So RTM version win. Unfortunately not all car by RTM are so good. Last disappointment was GT300 Garaya, when tyre moved through the arch when steering
- 664
- Australia
Those values control the speedo not the tacho.
Add or subtract those from ZERO=
Just noticed your tacho start at 5,000 RPM so set MIN_VALUE to 5000
In game hold the engine at 10,000 RPM and note the value on the tacho, work out the ratio between the too and multiply/divide STEP=
Also change the sign +/- of STEP= if it is rotating the wrong way.
Rinse Repeat until you are close enough. Or export the car to .FBX and use kseditor to edit the analogue instruments using the 'data' tab.
[RPM_INDICATOR]
ZERO=0
STEP=0.025
OBJECT_NAME=ARROW_RPM
OBJECT_NAME_MAX=Not used?
MIN_VALUE=5000
LUT=You won't need this as your tacho is nice and symmetrical
Last edited:
- 226
- Colombia
- 26
- France
You brilliant person, thanks a lot !
Since the only analogue instrument was the RPM, I assumed that it was just misnamed. But it was not, you were right. I used the 'Data Scripts' tab of kseditor to make the new data for the RPM needle.
Which is this, if anyone is interested :
[RPM_INDICATOR]
OBJECT_NAME=ARROW_RPM
ZERO=-1
MIN_VALUE=5000
STEP=-0.030125
That leaves the mystery of why it was moving this way in the first place.
Again, thanks !
- 1,788
- Le Mans
Try KSEditor modded from x4fab:
https://ascobash.wordpress.com/2015/07/22/kseditor/
From this discussion: https://www.racedepartment.com/threads/camtool-2.134902/page-6#post-3084148
you can grab this fix:
https://gist.github.com/Marocco2/15.../2f4ca367d44fbd59a666d63d100d1d431a65d506.zip
As I benchmarked before, it´s waaay less FPS consuming. But I didn´t tested functionality yet, just enabled it for benchmarks.
If you need help where to put these files, just PM me.
With this fix Cam Tool 2, i have 45 fps when i recorded with Superposition (Nvidia Encoder), résolution 3840x1080, max setting, profil perso Reshade RT.
Without camtool, view in, 55-60 fps
Last edited:
- 5
- Indonesia
Is there anyone making a Lancer Evo. VII to AC? thanks
Also this Evo II
Also this Evo II
Last edited:
- 387
- Indonesia
d
Last edited:
- 1,101
- France
UPDATES !
Renault R25 (2005) by VRC Modding Team - V1.1 Free Download [23/01/2020]
Link on VRC: https://vrc-modding-team.net/show/14
Link on RD: https://www.racedepartment.com/downloads/vrc-2005-renault-r25.30333/
Changelog:
- Tweaked pit stop times.
McLaren-Mercedes MP4/20 (2005) by VRC Modding Team - V1.1 Free Download [23/01/2020]
Link on VRC: https://vrc-modding-team.net/show/16
Link on RD: https://www.racedepartment.com/downloads/vrc-2005-mclaren-mp4-20.30334/
Changelog:
- Changed car folder name, erasing the “-” which caused javascript problems,
- Tweaked pit stop times,
- Added shaking exhausts.
ENJOY !
Renault R25 (2005) by VRC Modding Team - V1.1 Free Download [23/01/2020]
Link on VRC: https://vrc-modding-team.net/show/14
Link on RD: https://www.racedepartment.com/downloads/vrc-2005-renault-r25.30333/
Changelog:
- Tweaked pit stop times.
McLaren-Mercedes MP4/20 (2005) by VRC Modding Team - V1.1 Free Download [23/01/2020]
Link on VRC: https://vrc-modding-team.net/show/16
Link on RD: https://www.racedepartment.com/downloads/vrc-2005-mclaren-mp4-20.30334/
Changelog:
- Changed car folder name, erasing the “-” which caused javascript problems,
- Tweaked pit stop times,
- Added shaking exhausts.
ENJOY !
- 608
- World
i do not do modding now, dont have time for this recently
- 664
- Australia
CM/CSP can animate needles if it can guess the names properly.
Used for the other instruments that AC left out.
- 10,269
- Bonn
- GTAce
This is a league mod right? Same physics for every car etc.
- 172
- Portugal
Amazing what you´ve done with this! Imo, the best work you´ve ever shared. For an F1 fan like me this is what I truly love. Kudos, mate!
Barbe Rouge
(Banned)
- 212
- Afghanistan
The 1991 Brabham BT60Y from ASR formula is not yet on the net? it is free for R Factor but not for Assetto Corsa
- 1,101
- France
Sure It’s available for AC... not yet free !
https://www.asrformula.com/mods/assetto-corsa/beta-early-access/brabham-bt60y-1991-v0-1-beta/
- 6,679
- The Bunker
From Assetto Corsa Mod Central 24/7 FB group: ACMC Ford KA Cosworth
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! RELEASED !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!! ACMC Ford KA Cosworth !!!!!!!!!!!!!!!!!!!!!!!!!!!!!
With our releases still receiving a HUGE download following and the last one having had over 6k downloads we have been eagerly buzzing away to get the ACMC Ford KA Cosworth ready for release. Let’s see if we can blow the last record…..
Over the last 11 months we have progressively worked on this ACMC Ford KA Cosworth building A LOT of parts totally from scratch, including giving the KA a whole new physics dynamic; It shows, check the finer details and see for yourself.
The ACMC Ford KA Cosworth is a Hillclimb car; However, it also makes a fantastic Time Attack car! We have included fully adjustable gearing so high top speeds can most definitely be achieved as well as low end Hill Climbs!
Specs:
Ford KA Cosworth – Hillclimb spec
513BHP
608NM
Escort 4x4 engine and transmission package
ENGINE, ELECTRONICS, FUEL SYSTEMS , OIL SYSTEM AND INTERCOOLER.
200 block with liners and long studs, oil squirt jets, ford x4 steel crank, auto Verdi Ross, forged pistons, race bearings, modified oil galleries, updated oil pump with bigger diameter pickup pipe, big winged sump with baffle plate and WRC breather system.
Cnc head port with race cams on solid followers, double springs, etc. Oppliger plenum with 90mm DBW electric throttle,1800cc injectors with extra 1000cc of water methanol injection. Ecumaster black with STACK dash , efr 9180 twinscroll turbo and stainless steel manifold and Audi LeMans external wastegate.
TRANSMISSION.
Oppliger front diff with quaife atb.
Rear supra diff with Mk fitting kit.
6 speed mt75 sequential gearbox with uprated center diff and all prop shafts.
Encryption!
Yes its locked but within the car folder contains a video on how to get round it for skinning. the rest is up to you..
Credits:
3D Shell: Forza/Turn10
3D Work: Nathan Biddlecombe.
Sounds: Timo Ha.
4K Templates body and wheels: Nathan Biddlecombe.
Physics: Mike Rudland
Skins: Nathan Biddlecombe, Alan Mc Enroe and Jordan Doe.
!!! IF SHARED PLEASE USE LINKS PROVIDED AND ALL CREDITS !!
Any issues found please report directly to Admin : Assetto Corsa Mod Central 24/7 https://www.facebook.com/groups/436595309857460/
Thanks For Checking It Out & Enjoy...
Download Link:
http://bit.ly/2NQBb9B
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! RELEASED !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!! ACMC Ford KA Cosworth !!!!!!!!!!!!!!!!!!!!!!!!!!!!!
With our releases still receiving a HUGE download following and the last one having had over 6k downloads we have been eagerly buzzing away to get the ACMC Ford KA Cosworth ready for release. Let’s see if we can blow the last record…..
Over the last 11 months we have progressively worked on this ACMC Ford KA Cosworth building A LOT of parts totally from scratch, including giving the KA a whole new physics dynamic; It shows, check the finer details and see for yourself.
The ACMC Ford KA Cosworth is a Hillclimb car; However, it also makes a fantastic Time Attack car! We have included fully adjustable gearing so high top speeds can most definitely be achieved as well as low end Hill Climbs!
Specs:
Ford KA Cosworth – Hillclimb spec
513BHP
608NM
Escort 4x4 engine and transmission package
ENGINE, ELECTRONICS, FUEL SYSTEMS , OIL SYSTEM AND INTERCOOLER.
200 block with liners and long studs, oil squirt jets, ford x4 steel crank, auto Verdi Ross, forged pistons, race bearings, modified oil galleries, updated oil pump with bigger diameter pickup pipe, big winged sump with baffle plate and WRC breather system.
Cnc head port with race cams on solid followers, double springs, etc. Oppliger plenum with 90mm DBW electric throttle,1800cc injectors with extra 1000cc of water methanol injection. Ecumaster black with STACK dash , efr 9180 twinscroll turbo and stainless steel manifold and Audi LeMans external wastegate.
TRANSMISSION.
Oppliger front diff with quaife atb.
Rear supra diff with Mk fitting kit.
6 speed mt75 sequential gearbox with uprated center diff and all prop shafts.
Encryption!
Yes its locked but within the car folder contains a video on how to get round it for skinning. the rest is up to you..
Credits:
3D Shell: Forza/Turn10
3D Work: Nathan Biddlecombe.
Sounds: Timo Ha.
4K Templates body and wheels: Nathan Biddlecombe.
Physics: Mike Rudland
Skins: Nathan Biddlecombe, Alan Mc Enroe and Jordan Doe.
!!! IF SHARED PLEASE USE LINKS PROVIDED AND ALL CREDITS !!
Any issues found please report directly to Admin : Assetto Corsa Mod Central 24/7 https://www.facebook.com/groups/436595309857460/
Thanks For Checking It Out & Enjoy...
Download Link:
http://bit.ly/2NQBb9B
Last edited:
- 2,612
- United Kingdom
for posting it.
- 117
- Greece
- 359
- United Kingdom
Would anyone know of any Vision Gran Turismo cats to add to my collection?
So far I’ve got the Bugatti, Fittipaldi, Mazda, McLaren, Mercedes and Nissan, along with the Toyota and Volkswagen Gr.3
So far I’ve got the Bugatti, Fittipaldi, Mazda, McLaren, Mercedes and Nissan, along with the Toyota and Volkswagen Gr.3
- 2,612
- United Kingdom
For whatever reason I've never driven Nurburgring 1967 but today was the first time and oh boy is this a good track...It's had a small update and using the not-period-correct KA Cosworth that @Masscot posted was an absolute blast. Now to try it in the wet 
https://www.racedepartment.com/downloads/nurburgring-1967.28207/reviews
https://www.racedepartment.com/downloads/nurburgring-1967.28207/reviews
- 3
- England
Glad you like the KA any issues reply back to me dont try fix it and share here plz thats all i ask 
Barbe Rouge
(Banned)
- 212
- Afghanistan
Similar threads
