Assetto Corsa PC Mods General DiscussionPC
- Thread starter daan
- 145,700 comments
- 43,104,329 views
- 532
- France
Little update about the Iso Grifo : interior is 90% done I would say, still a few bits to do (center mirror, some vents, lights, etc) but I probably wont go further in terms of details. Have to balance between detail, time and performance 
. Texturing is going well, gauges are totally custom and done, still needs to get the logos right, and the dummies cleaned. Obviously there is only a basic AO on blender and no shadows, but you can still guess the result a bit before I put everything in AC.
Don't expect any release date for now, but it's going well
. Texturing is going well, gauges are totally custom and done, still needs to get the logos right, and the dummies cleaned. Obviously there is only a basic AO on blender and no shadows, but you can still guess the result a bit before I put everything in AC.Don't expect any release date for now, but it's going well
Last edited:
- 871
- United Kingdom
- 12
- Italy
NASCAR Cup Series 2012 released on my patreon: https://www.patreon.com/ScientistExtension98Mods
Original mod by assettonascar.com (not related to Patreon AssettoNASCAR)
Updated by ACNM
Better liveries: u/PlasmiteHD
testing: donohall
-UI Tweaks
-Materials
-removed unnecessary files
-Physics update
-Cameras
-LODs
-Startup animation
-Power curve
-Colliders
-Tyres
-AO maps
-Templates
-New fuel tank position
-2009 Model adapted to the 2012 kit
-New UV mapping
-UI Tweaks
-Better tyre physics
-All 2012 skins
Original mod by assettonascar.com (not related to Patreon AssettoNASCAR)
Updated by ACNM
Better liveries: u/PlasmiteHD
testing: donohall
-UI Tweaks
-Materials
-removed unnecessary files
-Physics update
-Cameras
-LODs
-Startup animation
-Power curve
-Colliders
-Tyres
-AO maps
-Templates
-New fuel tank position
-2009 Model adapted to the 2012 kit
-New UV mapping
-UI Tweaks
-Better tyre physics
-All 2012 skins
Attachments
- 175
- Spain
I've got one from Be_modding. Not sure if it's good quality, as I hadn't tested it. It has got no skins. I don't have the car link, but I remember the creator sharing all his work here.
Last edited:
MR SKINS
Premium
- 352
- UK
Thanks for your replys. I keep looking out for a good quality one, at some point one will come up, or I'll have to modify one to my taste of a mod.
Last edited:
- 492
- Hessen
Release from ABB (Aussie Big Banger and ATCC 1960 To 1985 Assetto Corsa)
Big Bathurst 12 Hour Release
Mazda RX7 Series 2
Left and Right Hand Drive Versions
Please Delete Old Version of Series 2
Massive amount of work has gone into this car from both Chris and Bruce to help get this Rotary Beast
Completely new car
Mazda RX7 Series 2
LHD and RHD
New Release (Completed)
mega.nz
Edit: Attention one car is a bit heavy on the texture size (2,7gb), can be reduced.
Big Bathurst 12 Hour Release
Mazda RX7 Series 2
Left and Right Hand Drive Versions
Please Delete Old Version of Series 2
Massive amount of work has gone into this car from both Chris and Bruce to help get this Rotary Beast
Completely new car
Mazda RX7 Series 2
LHD and RHD
New Release (Completed)
209.59 MB file on MEGA
Edit: Attention one car is a bit heavy on the texture size (2,7gb), can be reduced.
Last edited:
- 166
- Brazil
Question for the modders
What's the easiest way to downsize a car?
For example, I want to reduce the size of Kunos 312 F1 car so that it would look like a 166 F2.
What's the easiest way to downsize a car?
For example, I want to reduce the size of Kunos 312 F1 car so that it would look like a 166 F2.
- 6,953
- The Bunker
Slovakia Ring got an update, just in case anyone missed it.
Superb track, executed brilliantly by @Fuzo.
Try a full grid of VRC touring cars around here and tell me you aren't grinning like a Cheshire cat.
www.racedepartment.com
Superb track, executed brilliantly by @Fuzo.
Try a full grid of VRC touring cars around here and tell me you aren't grinning like a Cheshire cat.
SLOVAKIA RING 2023
SLOVAKIA RING is multifunctional racing circuit in Slovakia, located in the village Orechova Poton, in the district of Dunajska Streda. It was built in 2008-2010, author of the project is the Austrian architect Hans Roth. Track features: Track...
www.racedepartment.com
Cams for Bahrain | Chas1723
Patreon is empowering a new generation of creators. Support and engage with artists and creators as they live out their passions!
www.patreon.com
- 249
- Norway
The 240 looks nice and drives nice (drives very much like the old ATCC one...). But it should have a proper live rear axle, which is one of its most recognisable quirks.WTCC 1987 (Tribute Race07)
Includes :
-Alfa Romeo 75 turbo Evoluzione (3D From Race07)
-BMW M3 E30 (3D Base Kunos)
-Volvo 240 Turbo (3D From Race07)
Animation Wipers.
Extension for extra shaders, turn signal, light
Skins
Lods B - C
Downloads:
WTCC 1987 (Tribute Race07) v1.25 | ModdersSquadraCorse
Get more from ModdersSquadraCorse on Patreon
I'm gonna look into making a couple more skins for it, as well as making a higher resolution dash texture if possible. Probably going to tinker with the rear axle as well (but of course not publish anything without asking for approval).
All in all - very good work.
Holy macaroni, this is one of my favourite cars ever, along with the Volvo 240 Turbo. (I have owned both irl.)Release from ABB (Aussie Big Banger and ATCC 1960 To 1985 Assetto Corsa)
Big Bathurst 12 Hour Release
Mazda RX7 Series 2
Left and Right Hand Drive Versions
Please Delete Old Version of Series 2
Massive amount of work has gone into this car from both Chris and Bruce to help get this Rotary Beast
Completely new car
Mazda RX7 Series 2
LHD and RHD
New Release (Completed)
209.59 MB file on MEGA
Edit: Attention one car is a bit heavy on the texture size (2,7gb), can be reduced.
- 1,027
- Belgium
open Pure config in-game, and dial it down (called emmisive light I believe... just play around w some of the light sliders - and turn back to default the ones that don't do what you wanna do)
you should be getting 75 fps (and only that ) ... your GPU can do alot more , but no sense in making it do so , as your monitor only shows you 75fps... So use VSYNC and/or set a max fps of 76 in CM video settings and/or in NVIDIA Settings (I recommend the latter).
there's a stock one here but that 's no GTI race version either... and interior is not pretty (and alot of other things not right )
I quickly made it into a semi-race car ,
DOWNLOAD
far from even being called a good mod... I warned you, but maybe it can scratch an itch until there is a better one ....
- 1,190
- Fiji
Sweet, you've gained a follower on Patreon ! Any plans to also remake the 98 cars ?
- 609
- Brazil
One of the problems is that many mates make skins in (8k, 4k, 2k)....as much as possible, I am changing some skins to (1024 x 1024), or at most 2k.The FPS gain is considerable.
Last year I tried to do a race in Daytona (simulate 24 hours), impossible to play (it was at 40 fps and crashing with a maximum of 40 cars).
I hadn't noticed that there were cars with skins in (8k and 4k), I hope to modify (as I mentioned above) to a lower resolution.
And just commenting, my PC isn't the worst (i5-generation 10, RTX 2060, 16GB RAM freq.3000Mhz, SSD 500Gb)
- 1,027
- Belgium
the new F1 2009 mod (found in the garage) is amazing imho, but the rubber is way too reflective , giving a disturbing effect...
add this in each cars extension file to fix:
[SHADER_REPLACEMENT_...]
MATERIALS = gp_2009_TYRES
PROP_... = fresnelMaxLevel, 0.03
much more enjoyable that way!
add this in each cars extension file to fix:
[SHADER_REPLACEMENT_...]
MATERIALS = gp_2009_TYRES
PROP_... = fresnelMaxLevel, 0.03
much more enjoyable that way!
Last edited:
- 422
- Canada
Proton Racing #88 Ford LMGT3 skin ( for < trr_ford_mustang_gt3 > ). Also, a few power.luts for your BOPing. To install the power.lut, unpack the data directory for the car, remove the old power.lut and put your new one in its place, renaming it to remove the ".xxxhp" from the name. Then, you must repack the data directory (and toss the data folder).
Post Qatar race updates done. Wasn't alot of GT3 tv coverage so still couldn't ID one logo... (I'll survive
)
Post Qatar race updates done. Wasn't alot of GT3 tv coverage so still couldn't ID one logo... (I'll survive
)
Last edited:
- 197
- Italy
Are you referring to SSD 2009? Thanksthe new F1 2009 mod (found in the garage) is amazing imho, but the rubber is way too reflective , giving a disturbing effect...
add this in each cars extension file to fix:
[SHADER_REPLACEMENT_...]
MATERIALS = gp_2009_TYRES
PROP_... = fresnelMaxLevel, 0.02
much more enjoyable that way!
- 30
- Italy
in fact I didn't find much data on the Volvo, do you have any photos of the suspension diagram? I've already corrected the AI and I'm putting on the interior lightsThe 240 looks nice and drives nice (drives very much like the old ATCC one...). But it should have a proper live rear axle, which is one of its most recognisable quirks.
I'm gonna look into making a couple more skins for it, as well as making a higher resolution dash texture if possible. Probably going to tinker with the rear axle as well (but of course not publish anything without asking for approval).
All in all - very good work.
Holy macaroni, this is one of my favourite cars ever, along with the Volvo 240 Turbo. (I have owned both irl.)
https://silodrome.com/wp-content/uploads/2020/08/Volvo-240-Turbo-Cutaway.jpg
Last edited by a moderator:
- 6,953
- The Bunker
There must be a better RX7 cockpit that can be teleported in, surely? It badly lets the rest of the car down.Release from ABB (Aussie Big Banger and ATCC 1960 To 1985 Assetto Corsa)
View attachment 1329235
View attachment 1329236
View attachment 1329237
Big Bathurst 12 Hour Release
Mazda RX7 Series 2
Left and Right Hand Drive Versions
Please Delete Old Version of Series 2
Massive amount of work has gone into this car from both Chris and Bruce to help get this Rotary Beast
Completely new car
Mazda RX7 Series 2
LHD and RHD
New Release (Completed)
209.59 MB file on MEGA
Edit: Attention one car is a bit heavy on the texture size (2,7gb), can be reduced.
- 937
- Spain
Who said 3D Trees? 🤨
Spectacular what can be achieved with 2D "Cardboard Style" plants, and this assuming that the tones of the vegetation are not the most realistic... 😙
Spectacular what can be achieved with 2D "Cardboard Style" plants, and this assuming that the tones of the vegetation are not the most realistic... 😙
Last edited:
- 132
- Italy
This is my build:
- MSI B450 Tomahawk Max
- Ryzen 5 3600X
- 32GB RAM 3600 DDR4
- RTX 2070 Super
- Samsung Odyssey G5 34" 3440x1440 165Hz
AC and CSP settings by Jacob Cappello (found on Racedepartment) and PPF C13AEGIS Patreon
Is it possible that I only have 50 fps? Is there anything I can do to increase?
Last edited:
- 249
- Norway
It also had TC, if I'm not mistaken.
And the cutaway picture you sent... I have it framed, hanging over the bed in our guest room. :-D
- 30
- Italy
Update new version:WTCC 1987 (Tribute Race07)
Includes :
-Alfa Romeo 75 turbo Evoluzione (3D From Race07)
View attachment 1328991
-BMW M3 E30 (3D Base Kunos)
View attachment 1328992
-Volvo 240 Turbo (3D From Race07)
View attachment 1328993
Animation Wipers.
Extension for extra shaders, turn signal, light
Skins
Lods B - C
Downloads:
WTCC 1987 (Tribute Race07) v1.25 | ModdersSquadraCorse
Get more from ModdersSquadraCorse on Patreon
Fixed AI Volvo and Alfa Romeo
Interior Light for Alfa Romeo and Volvo
New rear suspension for Volvo
Downloads:
WTCC 1987 (Tribute Race07) v1.25 | ModdersSquadraCorse
Get more from ModdersSquadraCorse on Patreon
www.patreon.com
- 532
- France
Oh boy.
Short answer : there is no easy way (at least, known to me).
Long answer :
create a copy of the car.
Extract car's kn5 into 3Ds or Blender or same, then follow this (for blender only):
- delete all the nulls (keep object transformation for attacheds so nothing moves), as they will most likely be broken in the process
- right click - snap - cursor to world origin
- select ALL meshes at once
- right click - set origin - origin to 3D cursor
- Resize your car
- redo ALL the nulls necessary (remember : always Z forward from the move axis)
- redo ALL the animation necessary (same as above)
- export whole car in FBX (size 0.01, Z forward)
Then, redo the car, car's shaders and animations with ks-Editor.
Change every data's info about size for the correct one (inertia, wheel base, suspension, etc)
You'll probably need to change driver's position in CM, also.
Test the result. There will be bugs. Correct the bugs, re-test until satisfaction.
Then do as above for the 3 other LODs and the collider. The good news is : barely no nulls to recreate this time
Conclusion : If Ilja manage to create an easy "re-size car" fonction in CM, I officially declare him as a god.
- 30
- Italy
Public server: https://acstuff.ru/s/q:race/online/join?ip=80.211.236.235&httpPort=2023Update new version:
Fixed AI Volvo and Alfa Romeo
Interior Light for Alfa Romeo and Volvo
New rear suspension for Volvo
Downloads:
WTCC 1987 (Tribute Race07) v1.25 | ModdersSquadraCorse
Get more from ModdersSquadraCorse on Patreon
SthrnOldskool
(Banned)
- 161
- Australia
- 6,953
- The Bunker
Anyone else finding it impossible sometimes to manipulate the driver in CM Showroom after the recent flurry of CM updates?
Pressing 'T' no longer does anything with certain cars.
Yet another example of something that worked perfectly well for years and then gets randomly broken for no obvious reason.
Pressing 'T' no longer does anything with certain cars.
Yet another example of something that worked perfectly well for years and then gets randomly broken for no obvious reason.
Last edited:
- 232
- Australia
Thanks for the reply 24H, its the one from Tidy.. on this website..
Similar threads
