Assetto Corsa PC Mods General DiscussionPC

[Cote Dazur]

CM > analyse > should give option to fix driver parameters or something

Edit: just checked, driver's heads should already be hidden in VR.
Have you done a clean installation of v1.11?
Maybe you are clipping through his neck if the view is too low?

@Cote Dazur is it a particular car and/or skin that gives the issue?

The helmet is still there, the .ini file show 3 hidden helmet 80’s lines have been used, but not working.
It is the same in 2 cars with different skins.
Will redownload tomorrow.
Your 1.11 cars do not have helmets?

 

[alfredwayne]

i saw a few days ago someone analysing a mod in cm, i wanna do it aswell but how?

1. Cant remember if you have to enable dev mode, but if you do, click on "About", then click on the version number of CM until you get a message - Youtube Guide
2. Then if you want to see "full info" while analyzing, go to "Settings > Content Manager > Dev > and you have to tick 'While analyzing, check some extra cars' details'" - reddit
   
3. Then while viewing content, click on the analyze button on the bottom menu. Then you'll see the image that @MasterFocus shared (sometimes with more info if the car shares any parts with kunos mods)
   

 

[Rodger Davies]

Sorry! Changed it

10 points, much nicer thanks

In the AC Legends GTC 60s v1.2 mod, the ferrari_250gt_swb car's windows are not displayed from a distance (visually) of 10 meters, how can this be fixed?

Spoiler: screen

View attachment 1419833

Noted, will look into it

 

[RMi_wood]

The helmet is still there, the .ini file show 3 hidden helmet 80’s lines have been used, but not working.
It is the same in 2 cars with different skins.
Will redownload tomorrow.
Your 1.11 cars do not have helmets?

it is possible a skin or two was missed for definitions, but all 3 cars (should) have a proper driver3d.ini with "driver" and not "driver_80" (just re-checked)
As said, be sure to delete previous version and install v1.11 fresh.

 

[Masscot]

1. Cant remember if you have to enable dev mode, but if you do, click on "About", then click on the version number of CM until you get a message - Youtube Guide
2. Then if you want to see "full info" while analyzing, go to "Settings > Content Manager > Dev > and you have to tick 'While analyzing, check some extra cars' details'" - reddit View attachment 1419882
3. Then while viewing content, click on the analyze button on the bottom menu. Then you'll see the image that @MasterFocus shared (sometimes with more info if the car shares any parts with kunos mods)View attachment 1419881

Was just about to post the same.

No idea why Ilja still has this useful option locked behind a SNES-era cheat code and an obscure tick box hidden in a submenu. Why not just make it all openly available from the start? It's not as if it's a dangerous feature in the wrong hands, especially when there are a million other ways a user can bork their experience via ill-judged but well-intentioned combinations of vague or misleading tick boxes.

 

[StoffelWaffle]

Who knew EV Pickups could drift...

View attachment 1419856

FH5 port ? The Rivians would be cool as well. I started working on 'em but can't be arse anymore lol

 

[Rainmaker87]

After Grindelwald and Red Rock Valley, Frank Rway is working on the next masterpiece: Rome night

 

[Perico Lospa]

Who knew EV Pickups could drift...

Yes, a couple of times in a row. Then you have to wait eight hours to recharge the batteries for the next two minutes of fun... 🤣

 

[Masscot]

Yes, a couple of times in a row. Then you have to wait eight hours to recharge your batteries for the next two minutes of fun... 🤣

EVs and drifting, my two most favourite things in sim racing. Truly, I am blessed.

 

[Vintagedriver]

With Pyyer extensions the flickering is usually z-fighting because he sometimes just plonks new meshes on top of exiting ones, so you can try hiding the underlying mesh:

;useful for hiding stuff
[MESH_ADJUSTMENT_...]
MESHES =
IS_RENDERABLE=0

For shimmering armco barriers, this can sometimes work:

[SHADER_REPLACEMENT_...]
DESCRIPTION=possibly reduce moire banding on armco barriers, depends on texture complexity
ACTIVE = 1
MATERIALS =
MESHES =
PROP_...=ksAmbient, 0.7
PROP_...=ksDiffuse, 0.0

Get mesh or material names in Object Inspector.
It's all a bit experimental/hit & miss, but sometimes the results are worth the effort.

As I experienced a lot of aliasing problems with these steel profiles in VR mode, thanks for this tip.

 

[chris-k]

Hi, ive been trying out sim dreams 1998 mod but for some reason on nearly all tracks i try with all 22 cars on, theres always 1 ai car in the pit lane stuck on full throttle

Anyone know what causes this?

Thanks

 

[Perico Lospa]

Hi, ive been trying out sim dreams 1998 mod but for some reason on nearly all tracks i try with all 22 cars on, theres always 1 ai car in the pit lane stuck on full throttle

Anyone know what causes this?

Thanks

If always is the same car, you can try this... https://www.overtake.gg/threads/ai-gets-stuck-on-grid-at-race-start.186744/post-3232554

 

[Frank25]

Hi, ive been trying out sim dreams 1998 mod but for some reason on nearly all tracks i try with all 22 cars on, theres always 1 ai car in the pit lane stuck on full throttle

Anyone know what causes this?

Thanks

If you still use CSP 0.2.4/0.2.5-preview1 it could be the AI bug in this version. Then you should switch to the latest CSP 0.2.6/0.2.7-preview1.

 

[Triplexbee]

Hi, ive been trying out sim dreams 1998 mod but for some reason on nearly all tracks i try with all 22 cars on, theres always 1 ai car in the pit lane stuck on full throttle

Anyone know what causes this?

Thanks

Are your jabs up to date?

 

[Tetri]

Hi Tetri, that would be great. Maybe you could show me how you would make the BMW (https://www.overtake.gg/threads/1998-bmw-320i-stw-btcc.182492/) a couple of seconds faster and then I can try messing around with values myself. I like the idea of the occassional AI engine blow up.

Sure, i'll do it. Thinking of any track with already good ai lines for this car?

I never drove the car so i just wanna make sure i stick to your pace😂, go for a track you already have some kind of "hotlap".

I need your best lap time as well for reference😉

 

[chris-k]

If you still use CSP 0.2.4/0.2.5-preview1 it could be the AI bug in this version. Then you should switch to the latest CSP 0.2.6/0.2.7-preview1.

Thanks, i realised i was on the older version so now updated, hopefully that might solve it

Thanks alot

 

[petercrill]

Mazda Atenza CUP Public Release!!
Download:https://www.mediafire.com/file/l9ikiw1p9wayi8m/mazda_atenza_cup101creative.zip/file
Converted From GT7
-AO inside and out
-Realistic Dashboard
-Physics
-CSP Settings
-Driver Animation
-Panoramic session Start config Daniel Nogal
Garage ACTK help:
-COCKPIT_HR updated
-Add LODs
-Update collider.kn5

 

[Lracer]

Sure, i'll do it. Thinking of any track with already good ai lines for this car?

I never drove the car so i just wanna make sure i stick to your pace😂, go for a track you already have some kind of "hotlap".

I need your best lap time as well for reference😉

And the Alfa a lot more than a few tenths please...

 

[Tetri]

And the Alfa a lot more than a few tenths please...

I'm absolutly out of the loop for this class, what's the mod you're reffering to please?

 

[TURBOMATIZ]

After Grindelwald and Red Rock Valley, Frank Rway is working on the next masterpiece: Rome night

Is this the rome track from Gran Turismo?