Chassis Swap List

Hey, does anyone know what chassis i can use on my 240zg '71. i used the ones on the front page, but those dont look good to me. thnx
i used the lotus elise r111. it turns out really really flush. looks alright too. but
mine ways all of 800kg now and because im running 350Z motor it makes for over 500hp and mid mount. im not sure if you tried it or not. but i like it. (i also dont like "poke" very much.
 
Okay Ant, here's a freah face for the list:

IROC Camaro
Xanavi Nismo Z suspension
GT Supra chassis

Camber comes in at perfect drift spec: up to 4 up front, 0 in rear.
The engine that comes in these things are like diesels. I put a stg 2 turbo on this thing and it made 350hp with a lol amount of tq...500

9601643028_926eccf300_b.jpg



Dis aint no stance car, boi!

9601637784_1201dfb62e_b.jpg
 
Last edited:
Hey guys ive been trying to lower and stance 02 silvia s15. I use 98' sl500 chassis but i want to use a suspension that can lower it so the fenders are right on the rim. Any suggestions
 
my first post here , i didnt change the chassis only the numbers to 00 00:

This thread is for listing chassis and bodies that fit well together, it is not for showing off your slammed cars. If you just want to show other people your cars, there's lots of threads for that in the photo-mode section of the forum.
 
Hey guys ive been trying to lower and stance 02 silvia s15. I use 98' sl500 chassis but i want to use a suspension that can lower it so the fenders are right on the rim. Any suggestions

The closest I've got using a fully adjustible suspension was with 5f 4r camber and Xanavi Nismo Z suspension. I was using a supra chassis until I saw Dmax's post, then I swapped chassis' and it was almost tucked. There is very little tire between fender and wheel. You should just use the above camber numbers and manually lower it to 30, that should do it.

Nice car but "Murka" even tough you have Japanese everything inside the car and on a Japaneseanese track... :L

"'Murka" crashes parties all the time :sly:. The only thing japanese is the chassis. I listed that as the suspension for those who use editors. I know the max lowered value for that suspension and I enter it on all my cars after tuning them, but I keep the manufacturers suspension.
 
First post, better late than never ;)

'98 Sileighty, Viper GTS chassis, hemi v8.
707 bhp on stock exhaust (awesome noise, real meaty)

xfoc.jpg


a7ab.jpg


cbma.jpg


mwbi.jpg


'67 2000gt, 240rs chassis I believe, TVR v8.

j7ct.jpg



m3 gtr, m3 race car chassis.

8r72.jpg


TA22 Celica, 240rs chassis.

xre1.jpg



R34, C6 Vette chassis.

vnqe.jpg
 
Last edited:
Subaru Legacy 2.0GT with a Corvette ZR1 (C6) '09 chassis, Subaru Super Touring Car Engine @757hp and a RWD conversion.
London_2_zps317a96c5.jpg

London_1_zps3a70d641.jpg

London_4_zpsbd75d7f6.jpg


Still in progress at the moment. Still playing around with different chassis'.
 
Last edited:
I wonder who has tried finding a good chassis for the '79 Civic 1500 CX because I tried using the RUF BTR's, it gave the car a good amount of wide but the weight skyrocketed from 700 kg to 1200 kg lol
 
Quick update on the legacy. Found a new chassis for it. The Motul Pitwork Z '04 chassis. Its a bit wider than the previous chassis. The only thing i dont really like though is the camber at the front. Its at 10.0 i think, but i guess ill have to live with it. But ill like you guys opinion. This chassis or the Corvette ZR1 chassis above?

CircuitdelaSarthe2009_5_zps8f47f8f6.jpg

CircuitdelaSarthe2009_4_zpse6fe2e15.jpg

CircuitdelaSarthe2009_8_zps54b49177.jpg

CircuitdelaSarthe2009_11_zpsc3d0d455.jpg
 
UPDATED

Might end up moving this thread out of the drifting forum. Thank you for all the submissions and what doesn't work guys:tup:
 
Before I "try" to list all the details I will inform you right now that I forgot which chassis is on a lot of them, so an apology in advance..

PS: I had quite a few more but i messed something up when I copied them to my flas drive apparently..


Go-Kart / Full X1 swap :D
SanGimignano-TownSquare-1.jpg



Hyundai Tiburon / Full Supra SR-Z swap

TsukubaCircuit.jpg

TsukubaCircuit_1.jpg



Scion XB- 180SX chassis / Camaro SS RM '10 Motor / Z33 Suspension / Genkei Hyper Silvia Drivetrain and LSD.
TsukubaCircuit-1.jpg


'66 Beetle- '05 S2000 Chassis R10 TDI Stealth motor / FTO Super Touring Drivetrain / Lexus ISF RM Trans
SanGimignano-TownSquare_7.jpg


'60 corvette- Forgot which Chassis / Tank Car motor / FTO Super Touring Drivetrain
SanGimignano-TownSquare_6.jpg

SanGimignano-TownSquare_5.jpg


Gather Civic- Forgot which chassis , Genkei Hyper Silvia drivetrain and LSD, Re Ameriya FD35 motor
TsukubaCircuit_6.jpg

TsukubaCircuit_5.jpg


Honda CRZ - CRZ TC chassis / Black Edition motor / RE Ameriya Drivetrain/LSD/Suspension..
TsukubaCircuit_2.jpg

TsukubaCircuit_3.jpg

TsukubaCircuit_4.jpg


MotorSport Elise Wingless - MX-5 TC chassis
TrialMountainCircuit_1.jpg

TrialMountainCircuit-2.jpg


Formula Gran Turismo / Samba chassis / X1 Motor / FTO Super Touring Drivetrain **For 🤬 's and giggles**
TwinRingMotegiWestCourse.jpg



With the cars shown without chassis listed, If you really want to know what it is message me on PSN and i'm sure we could figure out something... hint hint.. PSN: jgancherjr
 
Last edited:
What's wrong with showing an example picture, a long with the chassis and car listed?

It's on topic, MOVE ON!

Thanks, and I am updating the chassis's as I figure ou what each one is so they can be added to the list 👍 I have updated two at this moment 👍
 

McLaren MP4-12C
Mercedes Benz CLK-LM Chassis
This one's set up at
Height: 30/30
Camber: 20/20
Could possibly go 25/10, the front is tucked a little and back is just slightly off perfect flush.


And for those wanting something crazier...

Nissan Leaf
Lamborghini Aventador Chassis
Set up at
Height: 25/25
Camber: 180/215.​
 
New to this hybridding so please excuse what may be a dumb question, but whats a good chassis to use for the Ford truck to make it look like its got a realistic lift kit on it? I'm talking about the Ford Larame I think its called. Or even the other Ford truck for that fact. Any help would be appreciated.
 
New to this hybridding so please excuse what may be a dumb question, but whats a good chassis to use for the Ford truck to make it look like its got a realistic lift kit on it? I'm talking about the Ford Larame I think its called. Or even the other Ford truck for that fact. Any help would be appreciated.

The chassis will only change the wheelbase and tyre positions relative to the body (for want of a better term. Also deals with basic handling characteristics, weight, weight distribution etc) For stance and lift you need to change the suspension. I think you're looking for the Sambabus suspension really, as it does this,,,

picture.php


,, to a normal car, EVEN ON THE LOWEST SETTING!
 
Last edited:
Back