Post your GT5 set up and man cave
- Thread starter Hurricane43
- 1,536 comments
- 574,658 views
- 5
- fobilemone
finally after 2 months finished my GT5 setup!! 
well worth the wait.. just need to take it up 2 levels in my unit now! will post pics when in the lounge in front of my lcd and in action.. sorry bout the terrible pics!
well worth the wait.. just need to take it up 2 levels in my unit now! will post pics when in the lounge in front of my lcd and in action.. sorry bout the terrible pics!
- 211
finally after 2 months finished my GT5 setup!!
whoa crazy. you actually bought this. It's supposed to be pretty pricey isn't it? how much was it if you don't mind me asking?
- 357
- GTP_Robulus
finally after 2 months finished my GT5 setup!!
A cool setup, but for some reason I can't stop thinking about lady gaga.
- 5
- fobilemone
YiNG_YaNG_6o4:
lol yer the proper converttable's are meant to be like 6000 or something ridiculous.. i made this one from scratch off that idea. cost bout 400 all up!
and thanks ichigo27! im proud of it
and lol robulus wat u mean lady gaga?
lol yer the proper converttable's are meant to be like 6000 or something ridiculous.. i made this one from scratch off that idea. cost bout 400 all up!
and thanks ichigo27! im proud of it
and lol robulus wat u mean lady gaga?
- 211
fobilemone
Holy smokes! I knew it was expensive but didn't know it was THAT expensive. Great job in duplicating it tho, sure fooled me hehe.
- 357
- GTP_Robulus
- 5
- fobilemone
lol! 
- 5
- fobilemone
Sgt_sheep:
It is a great design but not mine! Google racestar convert table
It is a great design but not mine! Google racestar convert table
- 317
- thomasphoenix98
- thomasphoenix98
My Gt5 Rig..
- 211
thomasphoenix
I can't drive bare foot. Gotta have socks on
- 3,509
- Cumberland, BC
- GTP_BlacqueJack
Here is mine:
- 357
- GTP_Robulus
- 47
One day I will find a wrecked 240-280z and cut out the drivers side and transfer tunnel to build a cockpit using the Z's pedals, seat, and maybe even the wheel and shifter.
I'll take pics later but my logitech wheel is mouned on a long coffee table which is on two boxes, I sit in an Ikea chair I've had for years which is stupidly comfy and feels just like a racing seat...
...one of these but mine is the older model...
http://www.ikea.com/gb/en/catalog/products/80112169
...one of these but mine is the older model...
http://www.ikea.com/gb/en/catalog/products/80112169
- 3,509
- Cumberland, BC
- GTP_BlacqueJack
Actually replaced cushion with foam pads and sheepskin; my heels get sore on a long race
I just race in my socks Of course I do wear pants and a shirt 
- 499
- Pontiac/MI/US
- MegamarcX_84
Sorry the pics are crappy, but this my cockpit setup, which cost me exactly $0 to make. Previously I was too embarassed to post this online, but a lot of my non-GT5 playing friends think it's the coolest thing ever, and combined w/ a simple 5.1 surround and a 42' 1080p Vizio, it gets the job done...Besides I saw people using ironing boards and couches as "cockpits"...so I don't feel anywhere as ghetto as I previously did....
A cheap car seat, and some wood/metal contraption will soon follow, cause any more than 3hrs continuous of gameplay w/out a little intoxication is hell on my butt cheeks...
- 74
- dumchidumchi
- dumchidumchi
Apiga AP1 side-by-side with Playseat Evolution
- 95
- Grayfox117
I wanted to get a multiple screen setup but it would take up too much room and would only be used for racing games. So I decided to upgrade my old Sony 60" LCD projection TV to a new Samsung 64" plasma (3D, 600hz, 25,000,000 :1 contrast ratio, anti-burn protection ). It made more sense for the "PATCAVE" since I can enjoy it with other games than just racing ones and play 3D games or 3D movies
- 189
- shaun_ccxr
I wanted to get a multiple screen setup but it would take up too much room and would only be used for racing games. So I decided to upgrade my old Sony 60" LCD projection TV to a new Samsung 64" plasma (3D, 600hz, 25,000,000 :1 contrast ratio, anti-burn protection ). It made more sense for the "PATCAVE" since I can enjoy it with other games than just racing ones and play 3D games or 3D movies
I love your steering mod, how much did u spent on it?
- 95
- Grayfox117
Well... tried not to think of it while making it. The whole process took me about seven months. The longer it took me the more I added lol. I got a used G27 for $180 on Craigslist, $170 for MOMO wheel, $100 for Carbon Fiber sheets, $250 for "The Perfect Pedal," $400 for MOMO N51 seat, $25 for integy cooling fans, plus $100 for buttons, annodized nuts & bolts, wiring, shifter mount and other misc stuff
Not including the frame off my old Sparco racing cockpit I had for about five years.http://s741.photobucket.com/albums/xx60/Grayfox117/GT project/
- 189
- shaun_ccxr
quite costly! caz i've think of doing it buy changing the steering and the gear knob= =but i found that actually i can get a gt3rs already
- 211
Grayfox117Well... tried not to think of it while making it. The whole process took me about seven months. The longer it took me the more I added lol. I got a used G27 for $180 on Craigslist, $170 for MOMO wheel, $100 for Carbon Fiber sheets, $250 for "The Perfect Pedal," $400 for MOMO N51 seat, $25 for integy cooling fans, plus $100 for buttons, annodized nuts & bolts, wiring, shifter mount and other misc stuff
http://s741.photobucket.com/albums/xx60/Grayfox117/GT%20project/
Great mod!
Similar threads
