What is your real drag car?

  • Thread starter xagt393
  • 138 comments
  • 11,445 views
eightlives
Ahh the mighty Fox Stang. Nice. Too bad your not closer I have a 5lug conversion I could sell you.
Click to expand...

Well he's supposedly already got 35 spline axles in it.

Which means he either gets to redrill them or stick with 4-lugs. Considering the car is supposed to make "900hp", well, erm, ah, you see, well, yeah.
 
Rotary Junkie
Well he's supposedly already got 35 spline axles in it.

Which means he either gets to redrill them or stick with 4-lugs. Considering the car is supposed to make "900hp", well, erm, ah, you see, well, yeah.
Click to expand...

No Moser sells 35 spline axles for the 8.8 rear end that are 4 lug if i went with 5 lug i would have too buy another set of centerline rims a $ 1000.00 and why would i want to do that when i have a set of 4 lug centerline rims on it So i got new moser axles and full spool and new ford racing 4.11 gears 2 years ago put centerline caps on so people think it's stock but far from stock C-Clip Eliminators ready to roll got a set of wheelie bars to put on this year since from the word go I hit a 150 shot of nitrous then once in 3 gear i hit the BIG BOY 250 shot of nitrous here's where u hold on at
 
crashthebash
No Moser sells 35 spline axles for the 8.8 rear end that are 4 lug if i went with 5 lug i would have too buy another set of centerline rims a $ 1000.00 and why would i want to do that when i have a set of 4 lug centerline rims on it So i got new moser axles and full spool and new ford racing 4.11 gears 2 years ago put centerline caps on so people think it's stock but far from stock C-Clip Eliminators ready to roll got a set of wheelie bars to put on this year since from the word go I hit a 150 shot of nitrous then once in 3 gear i hit the BIG BOY 250 shot of nitrous here's where u hold on at
Click to expand...

Nice man. I just have 31spline mosers with an eaton diff 3:73 ford gears. just got a custom alum drive-shaft back in the fall. I'm going to be rebuilding the 347 soon, losing oil pressure hoping I didn't spin a bearing :(

you should go post about this on the "other" site a lot of people are there and not here anymore.
 
Nice Mustang crash. What block is that? 351 punched out, or a 302? I'm thinking built 302. Also, try bypassing the AC and air compressor. Will give you a bit more power, and you will get more room with your alternator dropped 6 inches.

@xagt393

Wow nice classic Ford. Got a lot of those parts on my truck.
 
Slashfan
Nice Mustang crash. What block is that? 351 punched out, or a 302? I'm thinking built 302. Also, try bypassing the AC and air compressor. Will give you a bit more power, and you will get more room with your alternator dropped 6 inches.

@xagt393

Wow nice classic Ford. Got a lot of those parts on my truck.
Click to expand...

Slash the one in picture is a stock block 302 the new block is a ford racing r302 block which i bored .130 over going from a 302 too a 364 AC i got 2 windows if u need air I got rid of all that crap computer gone also Got a 1967 stang i'll build a 347 again and put a 101mm turbo

here's how she ran

The picture is after i got back from paint and had not done rear end in picture but it's done now Just working on New Motor Can't wait for SPRING Raced the wagon built 406 on 250 nitrous LiLNasty on Motor only and eat him by 4 cars OOO no and only got too 3 gear still had 2 more to go oyeah power

[

hear them gears:tup:
 
Last edited:
crashthebash
Slash the one in picture is a stock block 302 the new block is a ford racing r302 block which i bored .130 over going from a 302 too a 364 AC i got 2 windows if u need air I got rid of all that crap computer gone also Got a 1967 stang i'll build a 347 again and put a 101mm turbo

here's how she ran

http://www.youtube.com/watch?v=eZ6lmIjFezM&list=UUbeTyAug76ZNA8FdJxNdDtA&index=31&feature=plcp

hear them gears:tup:
Click to expand...

Nice man, I went with a Lincoln Mark VII , wanted something different yeah know.
 
Anything ford is the way too go it cost too run a ford i could have built 3 chevy motor's for what i have spent on this new motor But when she is done i'll have video That's me eight i was told the King demon would never work on my 347 this carb goes on a built Big block they said too much fuel well the brodix heads flowed just fine with that monster carb Raced alot of built stuff and won till she spilt but i have everything still for the 347 just need BIGGGGGER more power Never have enough power that's why it setup for 2 shots of nitrous
 
crashthebash
Anything ford is the way too go it cost too run a ford i could have built 3 chevy motor's for what i have spent on this new motor But when she is done i'll have video That's me eight i was told the King demon would never work on my 347 this carb goes on a built Big block they said too much fuel well the brodix heads flowed just fine with that monster carb Raced alot of built stuff and won till she spilt but i have everything still for the 347 just need BIGGGGGER more power Never have enough power that's why it setup for 2 shots of nitrous
Click to expand...

So true, my 347 is in need of a rebuild, I'm thinking of going 331 with a kenne bell :)
 
swara96
My dad has a 620 bhp Infiniti G37s Coupe. It's modded. Does 0-60 in 3.4 seconds and does the 1/4 in 11.3 seconds at 140 mph. It isn't for drag lol but it has potential to go over 200 mph. I call it the GTR for less lol

My mom has a 2008 BMW 328i E92 with 400 hp. Does 0-60 in 4.5 seconds and does the 1/4 in 12.4 seconds at 129 mph.
Click to expand...
So you're telling me your mom modified a 328i Coupe to perform in the exact same figures as a 414Bhp M3 Coupe? That an additional 170hp took a mid-high 14 second car to a low-mid 12?

Why do I find that hard to believe as a 328i Coupe owner myself....
swara96
Here's a link...http://media.photobucket.com/image/modded infiniti g37s coupe/blackg37/DSC01035.jpg
Click to expand...
That is not your dad's car. That car also does not produce 620hp. It has an exhaust & intake as far as performance mods go & the owner is selling them. What transmission does that car have if it is your dad's car & G37 model is it?
 
Last edited:
Its obvious that some guys on here know cars inside out and when i mean inside out i mean they hear a car driving past behind them and they can pick what engine/car it is... Why the need for stories about how much power your mummy's and daddy's cars have?
 
xagt393
Its obvious that some guys on here know cars inside out and when i mean inside out i mean they hear a car driving past behind them and they can pick what engine/car it is... Why the need for stories about how much power your mummy's and daddy's cars have?
Click to expand...

Lol I can name cars from their headlights and taillights...I've had that skill ever since I was 5.
 
I'm not GREAT at it, but can for example tell you what year chevelle it is by looking at the back of it from 1967-71 and that is just an example.
 
McLaren
So you're telling me your mom modified a 328i Coupe to perform in the exact same figures as a 414Bhp M3 Coupe? That an additional 170hp took a mid-high 14 second car to a low-mid 12?

Why do I find that hard to believe as a 328i Coupe owner myself....

That is not your dad's car. That car also does not produce 620hp. It has an exhaust & intake as far as performance mods go & the owner is selling them. What transmission does that car have if it is your dad's car & G37 model is it?
Click to expand...

That pic isn't exactly my dad's car. It looks similar, except for the wheels. It has a 7-speed automatic transmission...
 
swara96
That pic isn't exactly my dad's car. It looks similar, except for the wheels. It has a 7-speed automatic transmission...
Click to expand...
Sorry, I think you're just back-peddling now.

Dooglers asked for proof & that's the picture you provided in the link.
I questioned it & you said again that you provided proof.

Now that you actually saw my post from before, it's all of the sudden not your dad's car? Play the "I don't care" line as you wish, but your 2 posts from before say that is the car & now you say "well, not exactly"....
swara96
And I said it was a 328i Sedan...
Click to expand...
1) Doesn't matter. Figures don't add up.
2) You didn't. You said:
My mom has a 2008 BMW 328i E92
Click to expand...
E92s are Coupes.
 
McLaren
Sorry, I think you're just back-peddling now.

Dooglers asked for proof & that's the picture you provided in the link.
I questioned it & you said again that you provided proof.

Now that you actually saw my post from before, it's all of the sudden not your dad's car? Play the "I don't care" line as you wish, but your 2 posts from before say that is the car & now you say "well, not exactly"....

1) Doesn't matter. Figures don't add up.
2) You didn't. You said:

E92s are Coupes.
Click to expand...

Alright HERE IS A PICTURE I ACTUALLY TOOK FROM MY GARAGE... but it's having an upload error...what is your email id? I will email the pics to you, or try to upload it on here...
 
swara96
Alright HERE IS A PICTURE I ACTUALLY TOOK FROM MY GARAGE... but it's having an upload error...what is your email id? I will email the pics to you, or try to upload it on here...
Click to expand...

Hey nobody cares about your stupid argument, take it somewhere else. This thread is to discuss users' real-world drag cars.
 
K24Boosted
Hey swara. Do you know which mods the 328i has on it? 400+HP is an impressive number.

By the way the sedans are E90 not E92.
Click to expand...

I'm not sure of the fully listed mods, I know it sounds fishy but you have to trust me on this one. It has a Procede with PWM Meth and has a KN-Drop in filter
 
Fastphil96
Hey nobody cares about your stupid argument, take it somewhere else. This thread is to discuss users' real-world drag cars.
Click to expand...

Sorry about that...but he replied to my statement so technically it meant that he cared...:)
 
LOL you guys got me...my dad doesn't have any mods on his car, nor does my mom. My mom only has a cold air intake on the BMW, but the Infiniti is stock because it was leased. The link that I just posted is real though, I took that from my ipod touch
 
swara96
I'm not sure of the fully listed mods, I know it sounds fishy but you have to trust me on this one. It has a Procede with PWM Meth and has a KN-Drop in filter
Click to expand...
Wait, how did you get a Procede PWM Meth kit on a 328i, when Procede says the kit only fits
2007-2010 135/335/535/Z4/X6
2011 Z4
2011 335is
2012 1M
Click to expand...

http://procedetuning.com/index.html

swara96
https://mail.google.com/mail/?ui=2&...&th=134df925533fc48f&attid=0.2&disp=inline&zw

Sign in to your GMAIL account to see it...

this is my mom's BMW.
Click to expand...
Server error. Just upload it on Imageshack....

Edit* Of course it's all a joke now. Why lie in the first place....
 
McLaren
Wait, how did you get a Procede PWM Meth kit on a 328i, when Procede says the kit only fits

[/COLOR]http://procedetuning.com/index.html


Server error. Just upload it on Imageshack....
Click to expand...

Yeah lol I was kidding about the mods, but my dad really owns a 2009 Infiniti G37s Coupe (obsidian black) and my mom really owns a 2008 BMW 328i E90 (alpine white) with xenons and those Corona headlights

Edit* Just to troll people lol
 

Similar threads

SnakeEyes427
Building a TC or Drag car from a body available in the dealerships.
Replies
0
Views
813
SnakeEyes427
SnakeEyes427
M
  • Locked
Peugeot 806 Pro Car Skin Correction............read the description.... [Deleted]
Replies
1
Views
204
maximeerkat
M
CotillionRope
Side drafting - How effective is it with GT7 aerodynamics?
Replies
3
Views
1K
hermtownhomy
H
M
  • Locked
Peugeot 106 procar 1998 replica 2k/4k/6k + car [Deleted]
Replies
1
Views
818
maximeerkat
M
yGodzila
100hp challenge
Replies
2
Views
1K
Andre Nishi
Andre Nishi

Latest Posts

Back