Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 152,017 comments
  • 46,481,103 views
I just checked the new RSS Protech P92 (Porsche 911 GT3 R (992) and I don't see ANY safety webbing at all from the cockpit first-person view in VR while out on the track, not even one that renders only in one eye.
In CM Showroom in 2D the webbing is not visible either, in the cockpit or looking in from outside.
However, if I F7 to an external view while out on the track and look through the side windows, I can see the webbing through the glass, but only in the left eye, and only through the glass. Nothing renders at all in the right eye.
Reverb G2, CSP 0.2.6-preview1.
The safety web in this car is sitting very low, maybe that's why you missed it ?
I need to lower my seating position quite a bit to see this:

web.png

Though there must be something wrong because it isn't visible in showroom...
F5 or F7 cams don't show the thing either 👻
(Same CSP version)
 
Last edited:
The safety web in this car is sitting very low, maybe that's why you missed it ?
I need to lower my seating position quite a bit to see this:

View attachment 1416672
Though there must be something wrong because it isn't visible in showroom...
F5 or F7 cams don't show the thing either 👻
(Same CSP version)
No, it definitely doesn't render at all in the cockpit for me.
CSP is such a crapshoot. Seems like every new build bring new problems.
Trackside video screens are all now super-dark for me, almost impossible to see anything on them.
Not sure if that's CSP or Pure though.
sigh
 
No, it definitely doesn't render at all in the cockpit for me.
CSP is such a crapshoot. Seems like every new build bring new problems.
Trackside video screens are all now super-dark for me, almost impossible to see anything on them.
Not sure if that's CSP or Pure though.
sigh
But we have the same CSP and PURE versions installed. I'm on triple screen setup though, could it be a VR thing ?
I don't have the black screens issue either.
 
Last edited:
I think these cars show just how peoples opinions can vary a lot as URD and RSS both claim real driver input and technical details have gone into their mods, URD used Laurin Heinrich who drives Rexy in IMSA, RSS doesn't name who helped them however.
And with the huge amount of setup options, it's obvious that they will drive differently on their default setups.

Different drivers favour different setups, and so do different simracers. So that the cars drive differently doesn't necessarily mean that either one of them is more realistic or better than the other.

As you say, it's probably mostly down to opinions and personal preference.
 
No, it definitely doesn't render at all in the cockpit for me.
CSP is such a crapshoot. Seems like every new build bring new problems.
Trackside video screens are all now super-dark for me, almost impossible to see anything on them.
Not sure if that's CSP or Pure though.
sigh
Same here. Screens are also black or really dark. I have contacted PB to see if it’s CSP or Pure. The screens seem ok on LCS just Gamma has that problem. Not sure what causes the strange rendering on webbing and seat belts.
 
Last edited:
Same here. Screens are also black or really dark. I have contacted PB to see if it’s CSP or Pure. The screens seem ok on LCS just Gamma has that problem. Not sure what causes the strange rendering on webbing and seat belts.
for me since the new CSP the trackside screens are fixed, as before they were always way too bright! :D

have you tried resetting Pure to defaults via the in-game Pure cfg app? Also make sure to use the pure PP filter...
( finally you can also try and reset CSP settings to see if that fixes things.)

I saw the driver seatbelt do a similar thing (being visible only in left eye, when in F7 mode), and if I'm not mistaken that was on a Kunos 33 Stradale...
 
Last edited:
for me since the new CSP the trackside screens are fixed, as before they were always way too bright! :D

have you tried resetting Pure to defaults via the in-game Pure cfg app? Also make sure to use the pure PP filter...
( finally you can also try and reset CSP settings to see if that fixes things.)

I saw the driver seatbelt do a similar thing (being visible only in left eye, when in F7 mode), and if I'm not mistaken that was on a Kunos 33 Stradale...
I have reset Pure in main Pure config and in PP app as per PB advised. Not tried resetting CSP though. Are you using VR or flat screen. I’m on VR so have tried Pure PP and Pure VR filter.


Has this car ever been ported over to AC. Thanks
 

Attachments

  • IMG_0592.jpeg
    IMG_0592.jpeg
    52.2 KB · Views: 16
Last edited by a moderator:
Did anybody see this machinery recently at overtake? fictional or not this thing is absolutely beautiful looking! (Note: I haven't tried it out myself yet.)

The amount of hate under the article is insane. Don't understand why anyone is hating a new car just for being "fictional". Isn't the whole point of modding and AC to create new things?
 
Hey went to use the Kunos Maserati GT2 and it won't load up to track, could any kind soul chuck me the link to it, not sure why its not working but an integrity check a risk.
 
The amount of hate under the article is insane. Don't understand why anyone is hating a new car just for being "fictional". Isn't the whole point of modding and AC to create new things?
Guess the same members who are diehard fans from AMs2 with all those fantasy car brands and look-a-like cars. It’s absolutely not my cup-of-tea this modern stuff, but it is an interesting mod for the modern LM simdrivers. Deserves positive feedback.
 
Last edited:
But we have the same CSP and PURE versions installed. I'm on triple screen setup though, could it be a VR thing ?
I don't have the black screens issue either.
I have triples and use Quest 3 for VR. I don’t have netting rendered in my triples at all in cockpit view but in my VR one eye only. 😂 I have the same CSP as you guys. Newest updates from both Ilja and Peter B.
 
for Velo's Noble M600 Carbon Sport found recently in the garage , to make the carbon look nicer add this in extension ini:

;improve carbon
[SHADER_REPLACEMENT_...]
ACTIVE = 1
MATERIALS = carpaint, mirror_carbon
PROP_... = ksAmbient, 0.225
PROP_... = ksDiffuse, 0.25
PROP_... = ksSpecular, 0.5
PROP_... = ksSpecularEXP, 150
PROP_... = fresnelMaxLevel, 0.5
PROP_... = fresnelEXP, 5
PROP_... = fresnelC, 0.067
PROP_... = useDetail, 1
PROP_... = detailUVMultiplier, 55
PROP_... = detailNormalBlend, .05
PROP_... = extColoredSpecular, -0.9
PROP_... = extClearCoatIOR, 1
PROP_... = extClearCoatIntensity, 1
;PROP_... = extClearCoatTint, "0, 0, 0"
PROP_... = extClearCoatThickness, 1.1


For patching some holes I tried this :
;plug some holes in the model
[SHADER_REPLACEMENT_...]
MESHES = BODY, Cabin
CULL_MODE = DOUBLESIDED

But this does not work apparently... anyone able to fix?
 
I have triples and use Quest 3 for VR. I don’t have netting rendered in my triples at all in cockpit view but in my VR one eye only. 😂 I have the same CSP as you guys. Newest updates from both Ilja and Peter B.
Yes it’s mad. Been testing all afternoon trying different versions of CSP and pure but even after choosing older CSP and Pure the problem is still there with webbing and dark trackside screens. I’ve also lost FPS by 5 to 10 frames. It’s like something has changed the overall settings some how. Hopefully it will be fixed soon.
 
Released : DMD P20 LMP1´09
Author:F302
3D Model Car:RRRE,KW Studios
Texture Update : F302 (rework)
Skins: RRRE,KW Studios
Car Logo : F302
3d work: F302
hope u enjoy the Car
ps : send feedback ,bugs ,missing things
tested on 0.2.6-preview1
PP filer _PURELIFEEVO
have fun!

To install, move folders to "...\SteamApps\common\assettocorsa" or simply
drag'n'drop archive to Content Manager


20241229-193101-industrial-f302_dmd_p20_lmp1.jpg
 
Last edited:
I need some help guys!
Any reason the stickers light up??
And how to avoid that??
 

Attachments

  • Screenshot 2024-12-30 165239.png
    Screenshot 2024-12-30 165239.png
    260.6 KB · Views: 16
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.
Back