Assetto Corsa PC Mods General DiscussionPC

[xedos6]

Hey buddies, Page 4500 !!!! I got into this forum on page 96.So many beautiful cars

and tracks since that time, so many useful information and so much fun since then!Thanks to everyone who holds this wonderful simulation in life!

PS: A big thank you at this point to the operators of the page!

 

[Quark67]

Would anyone have any clue why certain tracks like vhe_hockenheim 1.6 would be missing textures like in the picture below?
View attachment 1377452

I'm also having issues with vn_goldcoastakv888 missing nearly all kerbs and walls.
View attachment 1377453

I've tried redownloading and reinstalling them but the same problem has persisted.

EDIT: It looks like it was something to do with a setting called deduplicate textures. Such a headache from a singular tick box.

SAme issue.
I've set "CSP\General Patch Settings\CPU Optimizations\Chunks optimization" to "Basic". With "Advanced" the issue comes back.

 

[Evanstanislas]

hery guys,

i've been trying to make a few vids with the freshly baked Jidé 1600 from @rnoir and i really wish someone could make new ai lines for the Bikernieki High Speed Ring. The oval layout is okay, the others are really cool, but the High speed ring is really something else.

Tracks - Bikernieki Race Track

martinsh submitted a new resource: Biķernieki Race Track - Biķernieki Race Track Public Beta v0.3 release This is a public BETA 0.3 release of Biķernieki. More info of the race track can be found in this thread: http://www.racedepartment.com/threads/biķernieki-race-track.140873 This version...

www.overtake.gg

At the moment with CSP 2.5 the AI is stuck at start, leaving only a bunch of 5 cars out of 25 leaving the grid. they would slow down too much on first corner, which i can deal with, but weirdly they would almost stop randomly when they reach the finish line on each lap. It seems like an ai lane or borders not done correctly, if someone could have a look. I'm gonna ask Parilla in case, but here's what the track looks like :



the Oval works fine for some reason, the other layouts suffer from the same issues.

Martinsh seems to have dropped the project, or at least is on something else, there have been no updates since 2018.

Generally, the AI has some problems in 0.2.4. Even in Kunos track I occasionally saw someone can't get out of the grid because they are doing negative throttle inputs. In some rare instances an AI car just makes 100% throttle all the time

 

[Rainmaker87]

It's release Friday!

This time with a refresh of the old Oulton Park 1967 track.

Oulton Park 1967 release

This 3D-track was ported to AC by Gilles75. It was updated by a unknown author. It was overhauled in 2024 by Rainmaker.

Features:
-competitive AI
-working track map
-support for hot lap mode
-replay cameras
-support for time attack mode
-26 pit boxes with working pit lane
-RainFX, GrassFX, water shader
-track description by Fanapryde
-smoothed road mesh
-night lights

Known issues: the layout is too wide

Download here:

https://www.patreon.com/posts/oulton-park-1967-109314013

Changelog v1.0:
-new and 7.5 sec. faster AI
-fixed pit area
-debug for wrong object keys
-fixed many wrong normals and double sided objects
-fixed a hole in the grass
-added trees from the rF Sixties track pack
-shader adjustments
-smoothed road mesh
-added stuff for time attack mode
-new UI
-added track description by Fanapryde
-purged unused objects and material -> halved the size
-corrected position of time gates, now laps count when entering the pits
-corrected position of hot lap start point
-added loading screens
-made RainFX
-fixed all trees
-removed unnecessary pit cubes
-upscaled textures
-vao patch
-added night lights
etc.

 

[Perico Lospa]

Getting really pee'd with CM when trying to update previews. I keep getting this error... The majority of the time this error comes up with skins that are massive...
Anyone else experience this error?

Yes, to me, very occasionally, especially when I make previews with a large batch of "hd" skins, as you said. The workaround is as easy as turning off/on AC and finish the previews that were pending.

I don't know about those computer programming nerd things, but I guess closing it cleans some buffer, temp folders or something...

 

[jac0]

No issue with the Viper on my side, wipers for the cars you mentioned are indeed going thru windshield and Vertigo all good over here!

which rendering mode ru using? (I'm using the Oculus Rift rendering mode... )

I hope you are not suggesting I switch to pancake as a workaround...


ps: question to all : I remember there was an option to raise/lower the render height of skid marks, but now can't find it (option search in CM is rather bad imho), anyone can tell me where it is?

 

[shi]

TI Circuit Aida - F1 1995 Pacific Grand Prix v1.0

https://www.patreon.com/posts/ti-circuit-aida-109320663

Add-on with billboards and kerbs set up for the F1 1995 Pacific Grand Prix.
Add a new layout.

-CSP required

How to install:
Drag and drop into the folder name: okayama

Okayama International circuit

PAY ATTENTION: DO NOT COPY THIS TRACK TO ANY OTHER WEBSITE, BEFORE ASKING ME FOR APPROVAL. ALSO IS NOT ALLOWED TO CHANGE THE CONTENT OF THE TRACK IN ANY KIND OF WAYS AND REPRODUCING IT FOR OTHER PURPOSES AND GAMES PRIOR MY APPROVAL. THANKS FOR...

www.overtake.gg

Credits & Thanks;
Okayama International Circuit 1.0 by Mitja Bonca
-Thank you for giving me permission

F1 1995 Pacific Grand Prix Add-ons by shin956
Real TV 1994 Pacific GP F1 Replay Cameras by @Gregz0r
marshall texture by kunos

Recommend: Visual Updated by @racinjoe013

Assetto Corsa PC Mods General Discussion

You guys also have ****ed up looking body shadow with the new URD cars or is it just me ? And can't update it as the cars are encrypted... NSX is the most noticeable for me

www.gtplanet.net

Download (MEGA)

Enjoy.
Request by Patreon member Connor - Timonike.

Requests are currently not being accepted.
https://www.patreon.com/posts/important-notice-108110777

 

[Fanapryde]

I'm also having issues with vn_goldcoastakv888 missing nearly all kerbs and walls.
View attachment 1377453

I've tried redownloading and reinstalling them but the same problem has persisted.

EDIT: It looks like it was something to do with a setting called deduplicate textures. Such a headache from a singular tick box.

Never noticed that so I checked again: all seems to be OK here...

 

[nanenab]

More WIP from RSS. Mclaren , GTR , Bentley and latest 911 inbound .
View attachment 1377163

Group C car from RSS will be interesting.

Some updates for the DW gt3 cars dropped. Probably.

 

[alexlockout]

Lotus Type 23 Cosworth skins 16 - 29

https://mega.nz/file/NndiFTbT#i_XIya_bHfkKkj4rMoXpHztN5-CsH8dC7A85R5N2Oak

​

 

[Gregz0r]

More WIP from RSS. Mclaren , GTR , Bentley and latest 911 inbound .
View attachment 1377163

Being entirely selfish for a moment, I would’ve preferred a 1990 Williams or Benetton, instead of the McLaren(as a decent one already exists from ASR), but it’s all good.

 

[GTV]

Since there are a ton of Spa mods out there, I can't provide an ext_config file or it will overwrite one you might already have. So you will have to do a little leg work yourself to get this installed. First, you will need to have an extension folder in your Spa track directory. If you already do, then that means you already have an ext_config file which makes this easier. If you do, copy and paste the code below to the bottom of your current ext_config file. Then download the attached file and extract it to the root assettocorsa folder.

;;;;; CABLES ;;;;;

[MODEL_REPLACEMENT_...]
HIDE=electric
FILE=spa.kn5
INSERT=spa_wires.kn5
INSERT_AFTER=Object799_SUB2

[SHADER_REPLACEMENT_...]
ACTIVE=1
DESCRIPTION= fixing fat and jagged power cables
MESHES = wires01, wires02
BLEND_MODE = ALPHA_BLEND
IS_TRANSPARENT = 1
CAST_SHADOWS= 1
PROP_... = ksAlphaRef, 0.5
PROP_... = extExtraSharpLocalReflections, 0.0

If you don't already have an extension folder, you will have to create one, then copy and paste the code above to a text document and save it as an ext_config.ini file in the extension folder.

Thankyou very much!

 

[JV82]

Hi Forum! I need your help.
How can I solve this problem?
I am on CSP 0.2.4-preview1 with latest Pure.
Kunos Barcelona with Pyyer's extension.
Thanks.

View attachment 1373771

No idea?

 

[Jezza819]

I will change the sound of the Vertigo again. I'm not really happy with the current sound. 🤔

Speaking of sounds. I thought the BMW Z4 GT3 would have more of a Corvette throaty sound.

 

[DaWallace]

We have to follow your updates via discord?

My cars are now in the autoupdater for Content Manager. 😁 👍

also lovin the Viper , but 2 rather big issues for me (using VR) :
1) issue w sunbanner text smearing/ghosting when moving my head (like the windows arrow trail effect if you know what i mean)
2) digital instr texts floating above the panel instead of being part of the panel

@DaWallace please put these 2 on your to fix list , and this will be one of my new favorite mods

EDIT : some more things that can be improved (sorry if it was already reported - I'm not into Discord):
DW Marcos Mantis GT3 : wiper still goes through the windshield
Ultima GTR: there's a transparant gap between the side mirrors and their surrounding encasing (or the inside of the sidemirror body is not rendered in cockpit mode, I dunno - maybe a culling mode thing)

EDIT2:
Z4 : wiper going through the sunvisor and glass
Vertigo: brakelights are not visisble when lights on

1) i dont have this issue and i drive in VR too. Must be a setting on your side.

2) yes, saw this too. will fix this for next update

3) will check the wipers

4) didnt see this with the mirrors on the Ultima, need to check

5) brakelights on the Vertigo were fine. but can check this again

Speaking of sounds. I thought the BMW Z4 GT3 would have more of a Corvette throaty sound.

Think i have already found a good sound. Will be replaced in next update.

 

[cool3865]

Awesome! An under-represented car, as are most from the late-Group C era(1990-1992).
Here's hoping for an eventual XJR-14, Peugeot 905, Mercedes C11, Toyota TS010 & a final Porsche 962 variant.

have like 4 different version of the Peugeot 905 and two version of the evo II, a couple of verisons of the TS010 and C11. only one we dont have is the final 962 but there is a 1994 LeMans Daur skin for the 962

 

[StoffelWaffle]

have like 4 different version of the Peugeot 905 and two version of the evo II, a couple of verisons of the TS010 and C11. only one we dont have is the final 962 but there is a 1994 LeMans Daur skin for the 962

The TS010 model is so old it's eligible for a driving license lmao

We deffo need BETTER models, not F1C ports from eons ago.

 

[maximeerkat]

My cars are now in the autoupdater for Content Manager. 😁 👍


1) i dont have this issue and i drive in VR too. Must be a setting on your side.

2) yes, saw this too. will fix this for next update

3) will check the wipers

4) didnt see this with the mirrors on the Ultima, need to check

5) brakelights on the Vertigo were fine. but can check this again





Think i have already found a good sound. Will be replaced in next update.

Thank-you for doing this car, its a blast

 

[petercrill]

Vauxhall Corsa VXR 2009 Public Release!!
Download:https://sharemods.com/bkjsium3d4m7/corsa_vxr_2009_101creative.zip.html
Converted From FM4
-AO inside and out
-Realistic Dashboard
-Physics By Vr driving
-CSP Settings
-Driver Animation
-Panoramic session Start config Daniel Nogal
-Beta testing and help ,@norms,@Mascot,and others

 

[Jezza819]

Sorry, I should have been clearer in my directions. All my mods are setup to drag them into the root 'assettocorsa' directory. The reason I mentioned it goes in the Spa_2022 folder was so people would know which version of the Pyyer files to download.

Originally, I just had one standalone version named Spa_2022 that had it's own track folder. Then some people asked me if I could make a version that installs into the Kunos Spa folder so I did. Unfortunately that means now I have to do every update twice and things can get a little confusing. The files needed to make the Pyyer extensions work are not the same for both versions so I needed to make two versions of those files as well. I was just trying to make people aware of which version went with what. I should consider dropping the Spa folder version so things are not as confusing moving forward.

To clear things up for you, here's the exact directions you need to follow:

1.) Install the Spa_2022 track by dragging the content folder into the root 'assettocorsa' folder.

2.) Manually install the Pyyer extensions into the newly created spa_2022 folder. And when I say manually, don't just drag his files into the root 'assettocorsa' folder or they won't get placed in the right location. Navigate through his .zip file until you get to where all the files are located. The common, layout, ui folders, etc. Drag all of those into the spa_2022 folder.

3.) Download the appropriate updated Pyyer files I provided and drag the content folder directly into the root 'asettocorsa' folder and overwrite anything it asks.

Getting closer. I got this.

And I thought everything was ok. But when I tried to just start practice I got this.

So where am I still going wrong?

 

[Tetri]

Generally, the AI has some problems in 0.2.4. Even in Kunos track I occasionally saw someone can't get out of the grid because they are doing negative throttle inputs. In some rare instances an AI car just makes 100% throttle all the time

Yeah it's really weird. Haven't been able to play fat alfie's Bremgarten for a while because of this. I cleaned cm, installed everything again, still getting random issues. Dunno what to do about it and can't find any proper clue to fix it.

And now if i try to go back to csp 0.2.2 or previous builds the race gets cancelled every single time. I need to find a fix for this.

 

[jac0]

My cars are now in the autoupdater for Content Manager. 😁 👍


1) i dont have this issue and i drive in VR too. Must be a setting on your side.

2) yes, saw this too. will fix this for next update

3) will check the wipers

4) didnt see this with the mirrors on the Ultima, need to check

5) brakelights on the Vertigo were fine. but can check this again





Think i have already found a good sound. Will be replaced in next update.

thanks! for point 1 , I will try and find the setting that gives the weird effect on the sunbanner

for 5 , I must add I run without PP effects (for massive performance gain) and you are probably depending on PP effects for making the brake lights visible...

 

[Schussnik]

Getting closer. I got this.

View attachment 1377689

And I thought everything was ok. But when I tried to just start practice I got this.

View attachment 1377690

View attachment 1377691

So where am I still going wrong?

Just to make sure, you do have Pyyer's paid extension right? the extension itself is NOT included in RacingJoe's files/package.

The installation logic is:

1/ install the standalone track from RacingJoe
2/ purchase/download Pyyer F1 2024 extension
3/ drop the files from Pyyer in the main track folder
4/ then drop the additional "Pyyer compatibility" files created by RacingJoe in the main track folder and click "Yes" when asked to overwrite files.

 

[Gregz0r]

have like 4 different version of the Peugeot 905 and two version of the evo II, a couple of verisons of the TS010 and C11. only one we dont have is the final 962 but there is a 1994 LeMans Daur skin for the 962

I have a few versions of those too(gtsupreme) but they could be a lot better.

 

[jac0]

Honda Integra Type R Race 2004 Public Release!!
Download:https://sharemods.com/sybmlyhiksah/honda_integra_r_race_2004_101CREATIVE.zip.html
Converted From GT6
-AO inside and out
-Realistic Dashboard
-Physics
-CSP Settings
-Driver Animation
-Panoramic session Start config Daniel Nogal

View attachment 1374810View attachment 1374811View attachment 1374812View attachment 1374813View attachment 1374814View attachment 1374815View attachment 1374816View attachment 1374817

Thanks Peter for this nice addition!

I created some numbers (looks better then the empty squares imho)

...

Download
feel free to incorporate in a next version release

(ps: note the ui_skin.json from each skin folder is best removed, as the name was incorrectly copied to many as "Phoenix Yellow" )

EDIT: I also added the numbers in the Livery icons , delete skins and install anew with this DOWNLOAD (this fixes also the names being wrong)

 

[Jezza819]

Just to make sure, you do have Pyyer's paid extension right? the extension itself is NOT included in RacingJoe's files/package.

The installation logic is:

1/ install the standalone track from RacingJoe
2/ purchase/download Pyyer F1 2024 extension
3/ drop the files from Pyyer in the main track folder
4/ then drop the additional "Pyyer compatibility" files created by RacingJoe in the main track folder and click "Yes" when asked to overwrite files.

Yes I have that.

This is what the spa_2022 folder looks like.

 

[DaWallace]

thanks! for point 1 , I will try and find the setting that gives the weird effect on the sunbanner

for 5 , I must add I run without PP effects (for massive performance gain) and you are probably depending on PP effects for making the brake lights visible...

So, you are not using Content Manager/CSP? 🤔

 

[racinjoe013]

I'm weird in that I like all my versions of the same track to look similar and it bugged me that Spa 2022 used different tree textures than the stock Kunos version of Spa. So I made some trees skins for Spa 2022 using the tree textures from the original Spa track. One of these will end up being the default tree textures I use the next time I update the track, but first I have to decide which one I like the best. Since I can't decide at the moment, i'm releasing all 4 versions as track skins and if you want to use them, you can pick which you prefer. Or you can edit them to make them more to your liking. These will get extracted directly into the track folder and you can delete the ones you don't need to keep.

Spa_2022 tree track skins

Trees:

Trees2:

Trees3:

Trees4:

 

[Nicholas_SX]

why the paint like this?

 

[Elio92]

Being entirely selfish for a moment, I would’ve preferred a 1990 Williams or Benetton, instead of the McLaren(as a decent one already exists from ASR), but it’s all good.

I would prefer a Brabham BT52, by wildness (insane powerful turbo) and by aesthetic.
I concede I’m a fan of Gordon Murray’s works.

Cheers.