Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter daan
  • 141,951 comments
  • 39,380,210 views
Released : Sigma P1
Author:F302
3D Model: AMS2
Texture Update : F302 (rework)
Skins: AMS2
3d work:F302
tweaks and Lod´s ACTK
hope u enjoy the Carps : send feedback ,bugs ,missing things
tested on 0.2.5-preview1
PP filer PURELIFE EVO

mega.nz

102.28 MB file on MEGA

mega.nz mega.nz
20241120-211027-monza-f302_sigma_p1_lmp2.jpg
 
kakauiyt
You are part of the few that makes our motherland proud, be we don't outnumber these guys.
Click to expand...
Weeell, dun'no don'care, to be honest. I care for my stuff, and that's it.

My gif was actually aiming towards you hiding behind Barbados's flag, rejecting our Baguette du fromage heritage. You coward.
I was picturing an exotic pirate of the caribbean, But turn's out it's just a common chad from Mulhouse, so disappointing.

My deepest apologies if you're really from Mulhouse...
 
racinjoe013
Link to my Sergio Loro Watkins Glen skin\ext_config update. Tried to make more realistic colors because my previous version was too blue\faded\vintage looking. Also a small grassfx tweak. I will eventually update my RD resource with this once I hear any feedback or suggestions for improvements.

Sergio Loro's Watkins Glen skin\ext_config

Couple of notes:
-- Backup extension and skin folders to be safe.
-- I couldn't decide on a saturation level I preferred so there is an LS version for each skin. Obviously LS stands for low saturation.
-- The reversed skins simply flip the green and brown grass. I find the reversed to be good for a burnt out summer look.
-- To keep the download file size down, I put redundant textures in their own skin. You can copy and paste those into each skin folder to avoid the need to enable more than one skin.
-- If you prefer a slightly darker\deeper look to the grass, enable the GlenMask skin.
-- I made one tree texture replacement, but can make a case for the old one. If you are familiar with previous versions of this skin, you'll pick out the tree right away. If you prefer the old tree, simply delete the popnegro file and rename popnegro_original to popnegro.
-- If you want the pa announcer back, open up the ext_config file and set ACTIVE = 1 for the ext_config-pa-announcer.ini section.
-- As always, all color choices were made using my own personal ppfilters so I don't know how this will look on other systems. For all I know, it could suck royally. :)

View attachment 1188394
Click to expand...

Sorry for grave digging here. 🫣

The link does not work anymore, is it the same version 0.99 as on Overtake or could you please upload it again?

Thanks in advance.
 
Last edited:
ClimaxF1
Maybe I'm wrong but Las Vegas

I see a Nukedrop now and Pyyer coming
Click to expand...
Pyyer's "made" a version of Ricardo Tormo circuit, dont know if he's ever finished it tho...
Regarding Las Vegas, there is currently no one else offering it, so anyone cant talk isht about it but still the best ever (yet) :lol:

Edit: I think Pyeer also made a convert of Nordschleife?? :confused:

Edit2: @Fall Guy I've seen a skin on RD (Overtake)
 
Last edited:
ClimaxF1
Maybe I'm wrong but Las Vegas

I see a Nukedrop now and Pyyer coming
Click to expand...
They are not working together as far as i know. Nukedrop did a massive update to Las Vegas thanks to my feedback and help (and from his Patreon community). I think he saw me doing it then he went to work. That's what I like when there's some competence. We'll join efforts next year to improve Las Vegas with LiDAR data

The version I never released (and I won't develop further)

 
Fall Guy
Guys, is there a driver3d model as The Stig available?
Click to expand...
Look here, version 1.1 was update in 2020

STIG

Initial release Big thanks goes to A3DR, who help me figure out what was my issue with skinned meshes. This was more for fun, to have bit more variety Model is based on an old model I made many years ago, very low poly. Wasn't made directly...
www.overtake.gg www.overtake.gg
 
JK1977
Released : Sigma P1
Author:F302
3D Model: AMS2
Texture Update : F302 (rework)
Skins: AMS2
3d work:F302
tweaks and Lod´s ACTK
hope u enjoy the Carps : send feedback ,bugs ,missing things
tested on 0.2.5-preview1
PP filer PURELIFE EVO

mega.nz

102.28 MB file on MEGA

mega.nz mega.nz
View attachment 1407343
Click to expand...
hi, I usually expect jagged none-rounded side mirrors when you release a mod , but this time it's not the case. (yippie for me because that really bugs me when there are round things which are not rounded - seems like I'm playing a 80s game then to me 😆) This mod looks and drives superbly.
Esp. Kudos also on the duct tape! Never seen such realistic duct tape in AC that I can remember. These little details add to the immersion.

Few things that can be improved on this one imho:
1. brake lights are barely distinguishable when lights are on
1732356626313.jpeg
1732356658505.jpeg

(as you can see you can hardly tell which pic is the one with the brakes)
maybe only use bottom led rows for lights on, and brake keep also top rows

2. the sun visor banners should rather be semi-transparent (the front one is even carbon from the inside which should not be imho)
it gives a claustrophobic feeling (esp in VR)
1732356557641.jpeg
1732356753136.png


3. some skin issue which is very noticeable from cockpit view:
1732356503129.png



Overall already a 4 star in my collection! Great job and thanks for sharing.
 
Alguecool
Weeell, dun'no don'care, to be honest. I care for my stuff, and that's it.

My gif was actually aiming towards you hiding behind Barbados's flag, rejecting our Baguette du fromage heritage. You coward.
I was picturing an exotic pirate of the caribbean, But turn's out it's just a common chad from Mulhouse, so disappointing.

My deepest apologies if you're really from Mulhouse...
Click to expand...
Weeeeeeeeell, there was a futur where i could have been in mulhouse, but instead i thought that the border france luxembourg germany was better than germany switzerland france.

I guess I will use the Bleu Blanc Rouge flag, just tilted a little :lol:
 
Greg_ST
Yes half Greek and half Abkhazian, near Russia and Georgia
Paris has also created many models for the "Chivas AutoArt mods"
Click to expand...
I'm well aware of Chivas Autoart, so possibly I have seen and appreciated Paris' work through the years. If I remember correctly, they've made the R34 JGTC which was an excellent job, among some others that were really well done mods.

Although I have to admit that I have many blank spots on this part of Greek history about Abkhazians, so you gave me enough food for thought and reasons to read by just making the reference. Do you also have any relation to Pontic Greeks?
 
Kominos
I'm well aware of Chivas Autoart, so possibly I have seen and appreciated Paris' work through the years. If I remember correctly, they've made the R34 JGTC which was an excellent job, among some others that were really well done mods.

Although I have to admit that I have many blank spots on this part of Greek history about Abkhazians, so you gave me enough food for thought and reasons to read by just making the reference. Do you also have any relation to Pontic Greeks?
Click to expand...
I think we should talk about this in private because we are going on a different subject
 
jac0
hi, I usually expect jagged none-rounded side mirrors when you release a mod , but this time it's not the case. (yippie for me because that really bugs me when there are round things which are not rounded - seems like I'm playing a 80s game then to me 😆) This mod looks and drives superbly.
Esp. Kudos also on the duct tape! Never seen such realistic duct tape in AC that I can remember. These little details add to the immersion.

Few things that can be improved on this one imho:
1. brake lights are barely distinguishable when lights are on
View attachment 1407547View attachment 1407548
(as you can see you can hardly tell which pic is the one with the brakes)
maybe only use bottom led rows for lights on, and brake keep also top rows

2. the sun visor banners should rather be semi-transparent (the front one is even carbon from the inside which should not be imho)
it gives a claustrophobic feeling (esp in VR)
View attachment 1407546View attachment 1407549

3. some skin issue which is very noticeable from cockpit view:
View attachment 1407545


Overall already a 4 star in my collection! Great job and thanks for sharing.
Click to expand...
About the banner, here's an actual interior view from the real thing:

1732373973432.png
 
petercrill
BMW Z4 M Coupe 2008 Public Release!!
Download:https://sharemods.com/glqmly2w37mi/bmw_z4mcoupe_08_101creative.zip.html
Converted From GT6
-AO inside and out
-Realistic Dashboard
-Physics By VRDRIVING AI
-CSP Settings
-Driver Animation
-Panoramic session Start config Daniel Nogal
Garage ACTK help:
-COCKPIT_HR updated
-Add LODs
-Update collider.kn5

View attachment 1407344View attachment 1407345View attachment 1407346View attachment 1407347View attachment 1407348View attachment 1407349View attachment 1407350View attachment 1407351
Click to expand...
Not an ideal solution but in case the car doesn't get updated, this goes some way to stopping some sunlight ingress and to patch some missing surfaces around the windows, A-pillar and door cills (from cockpit view):
Code: 
 ;stop sun getting places it shouldn't
[SHADER_REPLACEMENT_...]
ACTIVE = 1
MATERIALS = Material #27FD, Material #36HG, Material #89VVVS, Material #79VVSD, Material #32DRW, Material #28NG
CAST_SHADOWS = 1
DOUBLE_FACE_SHADOW_BIASED = 1

;doubleside mesh, eg fix bad wiper arms, window gaps, sun ingress etc
[SHADER_REPLACEMENT_...]
ACTIVE = 1
MATERIALS = Material #27FD, Material #32DRW
MESHES = 
CULL_MODE = DOUBLESIDED
DOUBLE_FACE_SHADOW = 0
CAST_SHADOWS = 1
DOUBLE_FACE_SHADOW_BIASED = 1
 
Mitsubishi GT0-LM skin

To install: Choose 6k or 4k and drag that folder over to CM

I decided to do a fantasy skin for this car as there arent that many to choose from

There is no AO for the inside windows so they cannot be skinned, the AO for the outside is not great but useable.

Yet another car which cannot have an AO i seem to pick these everytime at the moment.

car: https://modsfire.com/rX9HI74W0f3kmU6

Mitsubishi GTO-LM Fantasy skin 6k/4k

Mitsubishi GT0-LM skin To install: Choose 6k or 4k and drag that folder over to CM I decided to do a fantasy skin for this car as there arent that many to choose from There is no AO for the inside windows so they cannot be skinned, the AO for...
www.gtplanet.net www.gtplanet.net

Screenshot (804).png
 
maximeerkat
Mitsubishi GT0-LM skin

To install: Choose 6k or 4k and drag that folder over to CM

I decided to do a fantasy skin for this car as there arent that many to choose from

There is no AO for the inside windows so they cannot be skinned, the AO for the outside is not great but useable.

Yet another car which cannot have an AO i seem to pick these everytime at the moment.

car: https://modsfire.com/rX9HI74W0f3kmU6

Mitsubishi GTO-LM Fantasy skin 6k/4k

Mitsubishi GT0-LM skin To install: Choose 6k or 4k and drag that folder over to CM I decided to do a fantasy skin for this car as there arent that many to choose from There is no AO for the inside windows so they cannot be skinned, the AO for...
www.gtplanet.net www.gtplanet.net

View attachment 1407662
Click to expand...
I think you have the old one or it is from "rtm" or something like this

__custom_showroom_1732439153.jpg
 
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.

Similar threads

Famine
Assetto Corsa EVO Early Access Discussion Thread
11 12 13
Replies
386
Views
44K
Ande3200
Ande3200
OH1955
  • Question
Anybody got Oakes Field (Nassau) for Assetto Corsa?
Replies
5
Views
6K
OH1955
OH1955
S
Logitech G Pro wheel settings Assetto Corsa
Replies
0
Views
1K
Shah1
S
GTPNewsWire
Assetto Corsa Modder Creates Real Road Circuit Using Photogrammetry
Replies
16
Views
14K
Perico Lospa
Perico Lospa
Famine
Assetto Corsa Competizione Ultimate Edition Now Available on Steam
Replies
8
Views
4K
Apocalypse211
Apocalypse211

Latest Posts

Back