GT Sport SVG request thread (Please read 1st post)

[Maninashed]

Hello all. I have a (kinda) difficult request to make if I may.

I'd love if someone could replicate the white square on the Mazda 787B, that says "がんばろう日本", and "NEVER GIVE UP" in Mazda's font. Unfortunately, I'm not a very good photographer, so this image isn't the sharpest. I apologise for the slipshod nature of my request but I can't seem to dig up any better on Google myself.

I'd love it if anyone attempting this could also include a version where the opaque white background is replaced with transparency instead. Many thanks!

Found a closer pic

my "never give up" font wasn't spot on but came up with the following.

 

[daan]

I'm working on a new Indycar livery and I'm missing a few logos to complete it.

What I'm looking for:
Petro-Canada Lubricants (I'd like the Lubricants text white rather than red as well as transparent background)
View attachment 726496
Otterbox Universe (I'd like transparent background and color changeable please)
View attachment 726497
Copper Moon World Coffees
View attachment 726498
Go Puck (Transparent Background)
View attachment 726499

Omologato (Transparent background and color changeable please)
View attachment 726500

If anyone is willing to help me out with these, it would be most appreciated.

I have omologato and petro Canada, but I'm not near my PS4 to share them.

 

[Maninashed]

I'm working on a new Indycar livery and I'm missing a few logos to complete it.

What I'm looking for:

If anyone is willing to help me out with these, it would be most appreciated.

Looks like @daan has some for you. Have managed to get the copper coffee down to size for you.

 

[H1s6n]

anyone help ? i want a decal for this

 

[daan]

I'm down for the BGT race at Oulton Park tomorrow but I'll be back home Tuesday and I'll share them then.

 

[PinKPanther]

Hey lads, anyone could do these two for me?

1) DIV badge (the red circle with CV in it)
http://www.traxio.be/media/772801/plaque_recht.jpg

2)96Club
https://i.vimeocdn.com/video/447416857_780x439.jpg
I need a few versions of this one. One as it is, one fully white and one with the line and the international removed (without the black background ofc)

Thanks a lot!

 

[nemu_05]

I'm working on a new Indycar livery and I'm missing a few logos to complete it.

What I'm looking for:
Petro-Canada Lubricants (I'd like the Lubricants text white rather than red as well as transparent background)
View attachment 726496
Otterbox Universe (I'd like transparent background and color changeable please)
View attachment 726497
Copper Moon World Coffees
View attachment 726498
Go Puck (Transparent Background)
View attachment 726499

Omologato (Transparent background and color changeable please)


If anyone is willing to help me out with these, it would be most appreciated.

try these.

I've uploaded them all and shared them so grab them off my library (https://www.gran-turismo.com/gb/gtsport/user/profile/2132113/activities)
or download the zip which has them all in.

 

[XSquareStickIt]

my "never give up" font wasn't spot on but came up with the following.

Many thanks! This is brilliant!

 

[syntex123]

anyone help ? i want a decal for thisView attachment 726520

What exactly are you looking for? A decal that looks like the R34 taillight assembly or just a plain solid color decal to fit perfectly within it?

 

[Leytonhouse]

Can anyone help me to create this decal?

 

[MatskiMonk]

Can anyone help me to create this decal?

The following file is in the attached Zip.

 

[Leytonhouse]

The following file is in the attached Zip.

View attachment 726734

Thank you very much!

 

[Arcflyer]

Would someone be able to create a decal for the following please.
Many thanks in advance

 

[syntex123]

Would someone be able to create a decal for the following please.
Many thanks in advance

I have a headache right now so it might not be 100% perfect, but it should be fine

 

[Arcflyer]

I have a headache right now so it might not be 100% perfect, but it should be fine

That's superb - many thanks - now I just have to come up with a new livery. Thanks again

 

[Clean Racer]

Would someone be so kind and upload the Haas script/logo to the decal section? I found the individual "H" logo and one that says "Haas F1 Team" but not the one that has the full "HAAS" script like on the F1 car. Many thanks in advance.

 

[Red_Bull_Pro]

Anyone able to make the Google search box “how do I become a racing driver?” decal like what’s on the Nissan GTR NISMO GT3 Nissan GT Academy Team RJN ‘13? Thanks!

 

[Clean Racer]

I just looked and fiund the HAAS logo I was looking for in the game. Thanks to whoever put it in there!

 

[ScotteDawg]

I'm just gonna leave this here...

If someone wants to convert it, go your hardest... I actually don't even want it for anything, it just seems appropriate for this forum.

 

[Nuschel01]

I got another request to the svg god's. I already feel bad for all the asking

View attachment 726208

View attachment 726210

View attachment 726211

View attachment 726212

I couldn't find any better images where the decals were decently flat. This is a sticker sheet of a scale model car

Thank you very much in advance!

Nobody?

 

[daan]

I'm working on a new Indycar livery and I'm missing a few logos to complete it.

What I'm looking for:
Petro-Canada Lubricants (I'd like the Lubricants text white rather than red as well as transparent background)
View attachment 726496
Otterbox Universe (I'd like transparent background and color changeable please)
View attachment 726497
Copper Moon World Coffees
View attachment 726498
Go Puck (Transparent Background)
View attachment 726499

Omologato (Transparent background and color changeable please)
View attachment 726500

If anyone is willing to help me out with these, it would be most appreciated.

This is my Petro Canada logo

And my Omologto logo was shared already.

 

[Maninashed]

Nobody?

I did make a start on it had only done the SOK and eventually got a scan that wasn't too awful of the first. But the low resolution of pictures is making the eagle a nightmare to try and do (even zooming in to try a hand trace it just becomes a blurry mess) The Takurus is doable but I can't make out the smaller lettering below it.
Have you tried doing a google image search and upload the decal kit you have? as sometimes you can get lucky and find a higher res version.

 

[MatskiMonk]

Nobody?

If you know what the top one says it would be a lot easier. Three and Four should be easy enough, but that second one... nope and nope - too complex to accurately redraw, to poor an image to trace.

 

[Nuschel01]

I did make a start on it had only done the SOK and eventually got a scan that wasn't too awful of the first. But the low resolution of pictures is making the eagle a nightmare to try and do (even zooming in to try a hand trace it just becomes a blurry mess) The Takurus is doable but I can't make out the smaller lettering below it.
Have you tried doing a google image search and upload the decal kit you have? as sometimes you can get lucky and find a higher res version.

PM'd you

If you know what the top one says it would be a lot easier. Three and Four should be easy enough, but that second one... nope and nope - too complex to accurately redraw, to poor an image to trace.

I know these are way to small, it doesn't need to be 100% accurate tho.
Zero idea what the text means tho, I might look into it.

EDIT: Google says it means "integrated security". I'll try to find the kanji letters

EDIT²: 綜合警備

 

[SpecMiata-JSW]

Good morning gentlemen, I have two logos that I would love to be uploaded if possible. I'm using GT Sport to design a livery for our new Spec Miata and this is one of my sponsors. Thanks to anyone who can help out!!

<a href="http://s285.photobucket.com/user/johnwilding/media/5xr-h-logo-full-color_zps2td63utf.gif.html" target="_blank"><img src="http://i285.photobucket.com/albums/ll78/johnwilding/5xr-h-logo-full-color_zps2td63utf.gif" border="0" alt=" photo 5xr-h-logo-full-color_zps2td63utf.gif"/></a>

<a href="http://s285.photobucket.com/user/johnwilding/media/5xr-v-logo-full-color_zpsevydh2s8.gif.html" target="_blank"><img src="http://i285.photobucket.com/albums/ll78/johnwilding/5xr-v-logo-full-color_zpsevydh2s8.gif" border="0" alt="5XR-V photo 5xr-v-logo-full-color_zpsevydh2s8.gif"/></a>



Also, sorry for the funky looking hyperlinks it's been a long time since I linked to my Photobucket account, not sure how to clean those up. I did check the links and they do work. If the person who wants to try and upload these to GTS needs a different file in a different format please let me know, I have ai and eps files too. I just wasn't sure what was preferred since this is my first request in this thread.

Thanks everyone, very cool thread you all have going here!

 

[syntex123]

I'm just gonna leave this here...

If someone wants to convert it, go your hardest... I actually don't even want it for anything, it just seems appropriate for this forum.

View attachment 726916

I can't believe I actually made this one. I must be bored out of my mind. Half way through I was like.. why am I doing this?

 

[Nuschel01]

I can't believe I actually made this one. I must be bored out of my mind. Half way through I was like.. why am I doing this?

View attachment 727022

Meme font is Impact btw

 

[syntex123]

Meme font is Impact btw

Pfffff does it really matter. Haha. Fine, I'll edit it

 

[syntex123]

There

Whoops. Technically speaking a double-post. Forgot to edit my last post.

 

[Maninashed]

PM'd you

That new one was traceable 👍 so here is what it looks like and zip includes a background which you can use to change internal color if needed. and the Takurus.