The Old GT4 Drift Settings Depot - Permanently Closed

Status
Not open for further replies.
nightkids4ever
he wants some settings for the BMW M5
yeah, well, I figured that out like I figure out french texts at school, I just read the FEW words I DO understand, and make something up out of that.

But please, read this (AGAIN!!), AND this just to make sure I don't need any school knowledge to read what you say.
 
tedaconda
yo quiero 2004 BMW M5 settings.


??? Por Favor ???

Pefectly fine request. But please keep it in english. Thanks.
 
AmuseS2K
Anybody have some settings for the Infinity G35? I've seen it race but I dont know its a Infinty for sure..

double check and confirm if it's the Infiniti G35 you want, or the Nissan Skyline 350GT. check the dealers. :)
 
Car Name: '99 Silvia Spec R Aero (S15) (Bought Used) (380 HP)
Manufacturer: Nissan

Upgrades:
Racing Exhaust
N1/N2 Tires
Original HKS Turbo
Racing Brakes/Controller
Racing Suspension
Twin Plate Clutch
Semi-Racing Flywheel
2-way Limited Slip
All Weight Reductions
Increase Rigidity
Rigidity Refreser Plan
Oil Change
Wing
Some Nice Looking Wheels

Settings:
Tire Type: Front N2/ Rear N1
Spring Rate: Front 4.0/ Rear 4.5
Ride Height: Front/ Rear 95
Shock Bound/Rebound: Front/ Rear 8
Camber: Front 3.5/ Rear 2.5
Toe: Front/ Rear 0
Stabilizers: Front/ Rear 4
Driving Aids: None
Downforce: Front 0/ Rear 15

The car should just float into a drift. Works really well for me. Just turn in and the rear end should come loose. Enjoi 👍
 
what up
how bout some drift settings on a RUF BTR '86. i own a 1978 911 SC and USE TO love driving it. now it has blown 915 tranny with linkage damage
 
'96 Nissan 240SX (S13)

PARTS:
semi-racing exhaust
sports racing ship
N2 tires front & back
stage 1 turbo
sports intercooler
racing brakes
racign suspension
twin-plate clutch
semi-racing flywheel
2-way limited slip
port & polish
engine balancing
stage 1 & 2 weight reduction
rigidity refresher

SETTINGS:
racing suspension:
spring rate --- 9.0 / 7.0
ride height --- 98 / 98
shocks (bound) --- 6 / 8
shocks (rebound) --- 6 / 8
camber --- 2.5 / 0.5
toe --- 0 / 0
stabilizer --- 1 / 4

ASM, TCS off

my first settings post. not too much power (276hp), very easy to control (DFP900).
i started this setup trying to make a realistic handling drift car. enjoy :dunce:
 
Mojo D1 Dr1F70r
ER34 D1GP skyline



buy the following ,

weight reduction level 1
fully customisable suspension
fully customisable gearbox ( cant remember if the car comes with it )


Suspension


spring rate : F 6.5 R MAX
ride height : F 5 from bottom R 10 from bottom
damper settings : ALL DAMPER SETTINGS TO 1
camber angle : F 0.5 R 0.0
stabelisers : F 2 R 2


Tyres

F sports medium R sports medium


Driving Aids

Over ASM : 0
Under ASM : 5
TCS : 2-3


thats it i think , i'll chack it again and change is if im wrong .

its a pretty good setting , but when i counter steer i shoot out the opposite direction and spin out :irked: , if anyone can help with that it would be cool .
ive yet toy around t with the settings more , but if a get some better settings i'll throw them in .

:bowdown: Ken Nomura !

-Mojo-



Dude you have the best setup for this CAR THAT I HAVE FOUND BUT I HAVE ALMOST FIXED THE BUGS AND THE CHANGES I DID TO SETUP INCLUDE: STAGE 4 TURBO, LEVEL 60 LIMITED SLIP ACCELERATION, OIL CHANGE, THEN SET THE LIMITED SLIP DECELERATION TO 10 OR LOWER WHAT EVER WORKS BEST FOR YOU!
i HAVE HAD LOT'S OF FUN WITH THIS SETUP! 👍 :sly: :)
 
Hi everyone. I was just wondering if anyone here loves the Tommy Kaira ZZII? Well, I certainly do. Damn nice car... (my favorite... :mischievous: ) Well. I've been trying to drift with it, and it's pretty hard. Not sure what to do with the settings, so I've come here seeking guidance.

For the car, I've maxed out all upgrades. Bought everything. Even tires, bought them all... I just love this car too much... >_> I want to get around corners fast! the straight away has already been handled with this baby. :cool: But I need ultra fast cornering... But I am lost on this matter...

Anyway... Could anyone help me out with setting the car? Or maybe modifications and critic on my current settings? I really appreciate it. Thanks a lot. Show me the light!

My current settings:

Brake Controller:
7 / 20

Suspension:
Front Rear
SR 9.3 / 11.5
RH 78mm / 84mm
SB 5 / 4
SR 7 / 7
CAM 2.5 / 1.5
TOE -1 / 1
STAB 2 / 3

Transmission:
Auto 11
Sixth 0.760
Final 3.125

Limited Slip Diff:
Front Rear
LImited Slip 11 / 28
Int Torq. (ACC) 36 / 57
Int Torq. (DEC) 11 / 35

Weight Balance:
Balast Weight 39
Front/Rear Bal. 44

ASM(Oversteer) 2
ASM(Understeer) 19
TCS 3

Downforce:
25 / 35

VCD 13


Thanks a lot! :D
 
Does anyone have settings for the Option Z33? I just remembered that I won that car......haven't even used it yet. Thanks! :crazy:
 
here is are my Mazda RX7 Infini III FC settings, it drifts quite well.

what to buy:
Racing Exhaust
Sports Racing Chip
N1 tires
Racing Brakes
Brake Controller
Racing Suspension
Close Transmission
Triple Plate Clutch
Racing Flywheel
Carbon Driveshaft
2 way lsd
Stage 3 weight reduction
Roll cage
Chasis Refresh

settings:
F/R = Front/Rear
Tires N1/N1
Brake Balance F:3 R:17
Spring Rate: 6.2/3.8
Ride Height 102/102
Shock Bound 8/3
Shock Rebound 9/4
Camber Angle 3.5/1.0
Toe Angle 1/-2
Stablilizers 3/2
All aids off
should be around 243hp after oil change
 
Nawk
*your message*


My advice to you:

Brake Controller:
7 / 20

Suspension:
Front Rear
SR 4.5/ 6.5
RH 84mm / 84
SB 7 / 7
SR 7 / 7
CAM 3.0 / 2.0
TOE 0/ 0
STAB 1 / 1 (or 2)

Transmission:
Auto 11
Sixth 0.760
Final 3.125
(don't know really)

Limited Slip Diff:
Front Rear
LImited Slip 20 / 35
Int Torq. (ACC) 36 / 57
Int Torq. (DEC) 20 / 35

Weight Balance: }
Balast Weight 39 } I think this is ALL optional
Front/Rear Bal. 44}

ASM(Oversteer) 0
ASM(Understeer) 19
TCS 0 (I'd say, but maybe you need 1 or something)

Just check it out and see what happens, otherwise come back again and say what your problem is then:tup:

Succes:tup:

Downforce:
25 / 35

VCD 13
 
Can anyone get the drift settings for the RX-7 Spirit R. I have every mod possible on it but i just can't get the suspension right.
 
Youngsta
Can anyone get the drift settings for the RX-7 Spirit R. I have every mod possible on it but i just can't get the suspension right.
hmm ill try it soon
 
So I've been testing settings for the Tommy kaira ZZII, but I dunno. the wheels are always slipping, is it supposed to do that? It drifts extremely easily... just not how I want it. I mean, how does one usually drift with an AWD car? When I do it with those modified settings from G-T-4-Fan, I pretty much get the same results. My car doesn't really seem to grip well. :indiff: More help on this please? Anyone? Thanks.
 
Nawk
So I've been testing settings for the Tommy kaira ZZII, but I dunno. the wheels are always slipping, is it supposed to do that? It drifts extremely easily... just not how I want it. I mean, how does one usually drift with an AWD car? When I do it with those modified settings from G-T-4-Fan, I pretty much get the same results. My car doesn't really seem to grip well. :indiff: More help on this please? Anyone? Thanks.

Oooohhooooo, then I think I can't do anything for you:indiff: I can now imagine what you mean: low angle, high speed, long corner, drifts or am I wrong. I think you might just wanna set stabilizers VERY high, and if that's too much, just get something in between it more:tup:
 
street-drifter
315 bhp
stage 3 weight reduction
economy tyres
engine chip
triple plate clutch
racing flywheel..


have fun

Welcome street-drifter to GTP:)
Can you post a car name with this? Did you mean these settings to be for the ZZII??
 
scuer_one
eny one has a good settings for nissan 240sx? the one that is display there aint that good

if you dont like them, modify them for your own preference. They worked for the member that submitted them.

Or, try out some sileighty settings, they should be comparable.

and List is Updated
 
Now I'm drifting FR too, I've still got a problem that it STILL feels like AWD,
I just need to steer INTO the corner for keeping me spinning, and only countersteering to exit the drift, I think it's because of the settings, but I've put brake balance up to 1/24 and LSD in the back pretty high. What else could cause this to happen to me?
 
Nissan Silvia K's Aero S14 (1993)
as seen in my Practice Highlights 1 Video - Hosted by Vinsion
available often in the used car lots
DS2 Settings

Upgrades (243 hp)
Racing Exhaust
Engine Chip
Engine Balancing
N1 Tires
Full Customize Transmission
Triple Plate Clutch
Racing Flywheel
Carbon Driveshaft
Fully Adjustable LSD
Brake Balance Controller
All Weight Reduction and Chassis Stiffening items

Settings
Brake Balance Controller (F/R) - 10/6
LSD Setting - Default (10/40/20)
No Weight Balancing
All Assists Off
Suspension
Spring Rate - 4.6/5.4
Ride Height - 98/98
Shock Bound - 3/4
Shock Rebound - 7/8
Camber - 3.0/1.0
Toe - 0/0
Stabilizers - 2/1
Trans Autoset 11 (or tune as neccesary depending on the track)
 
Amuse S2000 Street Version

Upgrades:
N1 Tires

Settings:
Suspension:
Ride Height: 80/80
Shock Absorbers: 5/3
Camber Angle: 1.3/2.2

Driving Aids: Off
 
Status
Not open for further replies.
Back