Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 151,566 comments
  • 46,267,497 views
Step by step!!

now 90s pop GIF by NOW That's Music's Music
I was about to make the joke, but I held back... although since we are, here goes: we were kids until suddenly you realize that NKOTB they already look like this... 😄

fairport-convention-2.jpg
 
Last edited:
Hey all,

A league I'm in is running an MX-5 Cup season this fall, and are attempting to run Macau Guia. I just have a question or two for those who are perhaps more plugged into Reboot Team and the version history of this track, so we can get squared away which version is the best/most recent.

So the first proper version of the Guia Circuit is titled "macau" under Breathe's list - last version update in 2018. This version was made by Jim Lloyd, who from my understanding is/was part of Reboot Team, and also was a large part of the "rt_macau" that was released two years later. From my understanding, this earlier version was the R3E laser scan rip - and it has quite a nice retexture by ClimaxF1 on RD.

Now, from what I understand, though, despite "rt_macau" having Jim Lloyd heavily involved as well, "rt_macau" is an entirely different track to "macau". Is that right? Is there some deviation of the track mesh from the R3E rip of the previous version, or is the track itself the exact same?

Thanks to anyone who may know the history of this - we plan on using vanilla "rt_macau" v.1.01 at the moment.

Cheers.
 
I was about to make the joke, but I held back... although since we are, here goes: We were kids until suddenly you realize that
NKOTB they already look like this... 😄

View attachment 1288401
While i was writing the post, i was thinking about who will be the first one bringing this joke.šŸ˜†

Hi,

What about Gillet and Marcos updates ?

Thanks
Yes, I wanted to bring the update with the initial Ultima release, but the Ultima is taking longer than expected. So I think I'll release the update for Mantis, Vertigo and Z4 before Ultima.
 
Last edited:
Its actually not a fix. It depends on the tracks, what you need to set there. The main thinking behind the landscape shader is, to expand the track geometry to the horizon line. But if the track has many variations in height, the landscape shader would be visible within the track. But there are also tracks, with a benefit from this option, like mugello. Mugello has flat mountain billboards, which are floating in the empty space around the track. Activating the option will give them a flat ground and so the sit on the landscape now:

View attachment 1287996

active:
View attachment 1287997

on other tracks, this option would overdraw inside track geometry:
View attachment 1287998

active:
View attachment 1287999

The goal with the landscape shader is, to adjust its height to the height of the outer track geometry. So you don't see that the track is floating, if you move over the track.
You are right the Negative does not fully fix the issue as it seems to interfere somehow with treewalls etc.

However, I hope this leads you to find the bug as to why I only get a PURE landscape to render only if I check the Negative box
 
shi
Barbagallo 2006 v1.01

View attachment 1257688
Wanneroo Raceway, currently known as CARCO.com.au Raceway for naming rights reasons, is a 2.411 km (1.498 mi) motorsport circuit located in Neerabup, approximately 50 km (31 mi) north of Perth in Western Australia. It was built by the WA Sporting Car Club. (Wikipedia)

-CSP recommended
-30 pit/start
-AI, cam

NOTE; If you are using Sol and the track screen is dark, rename ext_config_for_sol.ini to ext_config.ini in the extension folder.

Credits & Thanks;
Original AC Track by Darren Blythe
-Thank you for giving me permission

2006 Update by @shi (shin956)
The pit building was taken from the rFactor1 track (Include readme_rfactor.txt), Original by Stuart Griffiths, Converted by The Lonely
logo.png and sections.ini by @Fanapryde
Test and Feedback by @slider666 , @Fanapryde , @Breathe , @Masscot

Download (mediafire)

Enjoy.
Converted upon request by Patreon member Gavin Stewart.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
v1.01 changelog;

-Fixed problem with pit meshes not being named properly. (Thanks TITI for the report.)
-Smoothed the white line at the entrance to the pit.
-Re-created pit_lane.ai.

Barbagallo 2006 v1.01
The link is in the quote.

v1.01 changelog;
-Fixed problem with pit meshes not being named properly. (Thanks TITI for the report.)
-Smoothed the white line at the entrance to the pit.
-Re-created pit_lane.ai.

Screenshot_bmw_m3_e30_barbagallo_2006_6-8-123-17-48-49.jpg
 
You are right the Negative does not fully fix the issue as it seems to interfere somehow with treewalls etc.

However, I hope this leads you to find the bug as to why I only get a PURE landscape to render only if I check the Negative box
which track do you use? could you post a picture?
What are your far plane settings?
1695208992032.png
 
Last edited:
So quick question for those with more knowledge than me!
How can I make the white sidelines less jagged on a track, I've tried subdividing the visible surface but no good, the track I'm messing with doesn't have a spline, I seen on lilski tutorial that increasing the resolution of the spline makes things smooth but how to do it when there is no spline.
Thanks to anyone that may help or even take the time to read this!

P.S. this image is not mine, it was posted by dms on page 4045 of this thread but it works to show what I'm asking about.
View attachment 1288371
There are two ways to do this.
 
UPDATE Modern Day Racing Series
First of all, thank you very much for the gigantic work you have done with this championship series. I spent almost the entire weekend downloading and installing the mods I was missing so I could use them (I couldn't believe the amount of missing content I had, but I don't regret anything XD). And now, the question. The TRR discord that contains the ARX 06 for the IMSA championship does not have the download link at the moment. Is there a car with similar characteristics that I can use as a substitute for that one? I ask this because I don't want to ruin the championship by adding a car that is either far superior or far inferior to TRR's. Again, thank you very much for this.
 
shi
There are two ways to do this.
Brilliant, I'll have a look through those, thank you very much for the help..
 
First of all, thank you very much for the gigantic work you have done with this championship series. I spent almost the entire weekend downloading and installing the mods I was missing so I could use them (I couldn't believe the amount of missing content I had, but I don't regret anything XD). And now, the question. The TRR discord that contains the ARX 06 for the IMSA championship does not have the download link at the moment. Is there a car with similar characteristics that I can use as a substitute for that one? I ask this because I don't want to ruin the championship by adding a car that is either far superior or far inferior to TRR's. Again, thank you very much for this.
Got PM.
 
interior skin for Seat Toledo "24hr" 2k/4k/6k

a quick interior skin for this car, the outside is bad the inside is a bit worse so i have had to make do with what i can here, its far from ideal or perfect but its a bit better than just a plain interior, just upscaling the og textures helped although the "generic.dds" only upsclaes to a certain point i cannnot push it beyond that. No pics from real life or anything just done of my head.

in the updates section or here: https://sharemods.com/d3t28px7hrka/interior_skins.7z.html

installation instruction s in the update section if needed

thanks
Screenshot_bem_seat_toledo_gt_rj_doningtonpark2023_20-8-123-0-2-17.jpg


thanks
 
interior skin for Seat Toledo "24hr" 2k/4k/6k

a quick interior skin for this car, the outside is bad the inside is a bit worse so i have had to make do with what i can here, its far from ideal or perfect but its a bit better than just a plain interior, just upscaling the og textures helped although the "generic.dds" only upsclaes to a certain point i cannnot push it beyond that. No pics from real life or anything just done of my head.

in the updates section or here: https://sharemods.com/d3t28px7hrka/interior_skins.7z.html

installation instruction s in the update section if needed

thanks
View attachment 1288536

thanks
please put the car folder in the archive as well... (ex path car\skins\anewskin ) that way it's easier for ppl downloading all and installing in the evening... and/or for using drag & drop in CM.

Thx!

Audi R18 E-Tron Quattro release on my patreon !

Free release, 23 september 2023 !
View attachment 1288561
Link here !
nope, it's locked...
 
Today I'm out of work so I decided to learn something about CSP to improve a track.
This is what I manage to do with Waterford Hills Road Racing

Grass textures are taken from fln_long beach.
You have to copy the files inside "tracks\fln_long beach\skins\cm_skins\red curbs" (with the exeption of curb_new2.dds) to the "waterford_hills\extension" folder.

I used an existing ext_config.ini which I used as a template, but I don't remember the autor :guilty::bowdown: ... I'm quite sure he was Rainmaker

Before and after
before.jpg
after.jpg
 

Attachments

Last edited:
please put the car folder in the archive as well... (ex path car\skins\anewskin ) that way it's easier for ppl downloading all and installing in the evening... and/or for using drag & drop in CM.

Thx!
oh would people prefer that if i did the file structure so you can just drag and drop into CM? i stayed away from that as i have had issues with CM installing skins that's why i "advise" people to do it manually but i can keep that in mind for the next release and do a proper file structure, the ones i had issues with probably didn't have the correct file structure which is why i had issues . Thanks for the feedback :)
 
Last edited:
UPDATE Modern Day Racing Series

v1.03
Improvements for GT3 class:
-added faster AI for the Honda NSX GT3 https://www.mediafire.com/file/6e1d0eedwq7qdd6/
-further improved AI for the Audi R8 GT3 https://www.mediafire.com/file/tdid6xs1al5201r/

-added extra links for TRR mods (IMSA and WEC 2023)

 
Last edited:
oh would people prefer that if i did the file structure so you can just drag and drop into CM? i stayed away from that as i have had issues with CM installing skins that's why i "advise" people to do it manually but i can keep that in mind for the next release and do a proper file structure, the ones i had issues with probably didn't have the correct file structure which is why i had issues . Thanks for the feedback :)
Even if not using CM it would just make life easier. Im always renaming the download so I know that its for the Toledo.

Bugs me when I go on a skin downloading binge on RD and dont get around to installing them straight away and the downloads are just named after the car number and team name or sponsor. Have to go back through my history to figure out which car they belong to.
 
Even if not using CM it would just make life easier. Im always renaming the download so I know that its for the Toledo.

Bugs me when I go on a skin downloading binge on RD and dont get around to installing them straight away and the downloads are just named after the car number and team name or sponsor. Have to go back through my history to figure out which car they belong to.
i did not even think of the "what if i download it and not install it straight away" angle. i will make sure all my future releases are named properly with the right file structure e.t.c. I understand why it can be confusing without it. Thanks for the feedback :)
 
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.
Back