Assetto Corsa PC Mods General DiscussionPC

[kimiraik]

Hello JK, i'm not 100% sure what has been changed but the 1.2 version to me at least is pretty much un-driveable.

It acts like it has waaaaaaaay to much aero at the rear and as a result the back end just wants to go around at all times with absolutely no throttle at all. The first version you released does not do this at all and feels correct.

i have tried a few things:

raising the strength of the tc
lowering the ARB at the rear/higher at front
lowering the spring rate at the rear
aero at "0" in setup on the rear


none of these changes made a difference


is there anything you can think of?

i can replicate this issue on other cars if i raise the aero at the rear way to high or if i raise the spring rate and/or the anti roll bar at the rear to high, none of these things seems to make a difference on your car for some reason though.


thank-you

Same here!

 

[maximeerkat]

Same here!

thanks for the confirmation, i was thinking it was just me .

 

[sab001]

Update to my RSS Lexus RCF GT3 skins:

• updated logos/graphics (not perfect) for 2024 WEC, and for 2024 LM (only the numberplate change)
• couldn't find good pics of the hoods, so updates for that may be done later.
• includes the previous versions, listed as wec 2023 skins.

RSS Lexus RC F SKINS - WEC&LM #78&#87

Skins for rss_gtm_lux_v8 (Lexus RC F GT3) updated the logos to 2024 LM spec (same for WEC, just different numberplates) not perfect, life's too short. I'll post some power.luts for this car over in the forum. (dang those "T" edit thangs...)

www.gtplanet.net

Link for power.luts (593hp, 622hp, 660hp, 672hp) below...

 

[Fanapryde]

Hello JK, i'm not 100% sure what has been changed but the 1.2 version to me at least is pretty much un-driveable.

It acts like it has waaaaaaaay to much aero at the rear and as a result the back end just wants to go around at all times with absolutely no throttle at all. The first version you released does not do this at all and feels correct.

i have tried a few things:

raising the strength of the tc
lowering the ARB at the rear/higher at front
lowering the spring rate at the rear
aero at "0" in setup on the rear


none of these changes made a difference


is there anything you can think of?

i can replicate this issue on other cars if i raise the aero at the rear way to high or if i raise the spring rate and/or the anti roll bar at the rear to high, none of these things seems to make a difference on your car for some reason though.


thank-you

Same here!

Strange, I have no issues with v1.2, even with stock settings...

 

[Teddie]

Guys, where / what ini settings make certain cars 'head-movement' really loose compare to other cars using the same NeckFX settings. Just curious if there is an ini setting(s) that are specific to each car. I've got my NeckFX right where I want them, but I'm currently bouncing back and forth between championships and a couple of the cars have really loose/dramatic head-movement. Like my head is on a broken bobble. In this instance in particular, it's the F1 1989 cars that came out recently. Just very extreme level of head tilting compared to the rest of the cars I race.

EDIT: Nevermind guys. I figured it out. It's the SHAKE_MUL=n in the car.ini. My memory sucks; I remember one of our friends here actually answered a similar question of mine about a month ago and told me about the SHAKE_MUL setting.

My remark: I do see a lot of floating trees and I do prefer a massif tree wall more then looking at pixels.

Roger that, my friend. I'm the opposite when it comes to tree walls. Thanks for trying it out and for the feedback.

 

[maximeerkat]

Strange, I have no issues with v1.2, even with stock settings...

i can't even get around the 1st corner before the start/finish straight on the redbull ring the rear just seems to dig in and push the rear around, like it has way to much aero or the spring rate is to high. Its a weird 1 for me as i can usually get around this issue with a few tweaks but not this car for whatever reason.

 

[ItsHords]

Hey guys, I'm using the TAV Moderna Dynamic preview and for some reason this keeps happening (The Momo liveried one is how the preview should turn out). Even when updating an entire batch it sometimes just decides to change the background to these two shades of gray and moves the camera. Also when I try to then just update the one ****ed up preview it still sometime does, sometime doesn't turn out correctly.
I've already turned down the preview quality to see if that fixes it, but to no avail.
Anyone know how to fix this issue? (Btw I have changed the angle of the camera slightly, but also with the stock angle I had the same issue)

Thanks!

Not an fix to your problem, It seems to be an active thing happening for me on random mods and skins here as well, But any chance you could link the CSP showroom that you are using there? Tried searching for it comes as an full on map which idk if that is right.

 

[Peugeot905]

Update to my RSS Lexus RCF GT3 skins:

• updated logos/graphics (not perfect) for 2024 WEC, and for 2024 LM (only the numberplate change)
• couldn't find good pics of the hoods, so updates for that may be done later.
• includes the previous versions, listed as wec 2023 skins.

View attachment 1366751View attachment 1366752

RSS Lexus RC F SKINS - WEC&LM #78&#87

Skins for rss_gtm_lux_v8 (Lexus RC F GT3) updated the logos to 2024 LM spec (same for WEC, just different numberplates) not perfect, life's too short. I'll post some power.luts for this car over in the forum. (dang those "T" edit thangs...)

www.gtplanet.net

Link for power.luts (593hp, 622hp, 660hp, 672hp) below...

Very Nice also thank you for the extra Power.lut's. I feel like the RSS GT3s are pretty underpowered. Granted there are a ton of GT3-based series across the world with their own BOP systems.

 

[MS6Driver]

i can't even get around the 1st corner before the start/finish straight on the redbull ring the rear just seems to dig in and push the rear around, like it has way to much aero or the spring rate is to high. Its a weird 1 for me as i can usually get around this issue with a few tweaks but not this car for whatever reason.

Same here, downgraded to the old version

 

[deepred]

I'm new to posting on GTPlanet, and if anyone hasn't already asked, did anything further come of this?

I've looked around the Web and so far all the Alfa Romeo 164 models I've come across so far don't have a detailed interior. And none of the major car racing game franchises have any plans yet for including the 164.

To elaborate, there are are number of existing AR 164 game mods out there, but all of them are low-poly GTA models dating back to San Andreas - 2-decade old technology. Commercial 3D models of the 164 have well-detailed exteriors, but all the interiors are basic placeholders. Personally I'm attempting to kitbash and refine some existing 164 models, but it can be time consuming.

Are TonySSS et al able to get in touch with the model makers on FB?

 

[Vintagedriver]

One of the worst culprits was DDM's Tsukuba, which was one of the first that @leBluem, @slider666 and I looked at (along with RT Fuji).
For DDM's Tsukuba, swap in this extension folder to go from this:

to this:

Download extension

Download File extension

sharemods.com

(note: this one has a different DDS because the cables are made slightly differently).

@Masscot a request, could you please modify the power/telephone wires from Kunos own Laguna Seca track, I was surprised how great this track was to drive and by the availability texture improvements mods 4k, 8k and the ones from Overtake, but in all those packs the wires are always pixelated.
Maybe you could implement this as a upgrade part of your existing Laguna Seca mod
https://www.overtake.gg/threads/lush-green-laguna-seca-skin.178240/

 

[gtrNL]

Update to my RSS Lexus RCF GT3 skins:

• 
  View attachment 1366751View attachment 1366752
  
  
  

  RSS Lexus RC F SKINS - WEC&LM #78&#87

  Skins for rss_gtm_lux_v8 (Lexus RC F GT3) updated the logos to 2024 LM spec (same for WEC, just different numberplates) not perfect, life's too short. I'll post some power.luts for this car over in the forum. (dang those "T" edit thangs...)

  www.gtplanet.net
  ...

Why didn't I check the GTP downloads section before starting on this livery myself... Nicely done!

 

[Masscot]

@Masscot a request, could you please modify the power/telephone wires from Kunos own Laguna Seca track, I was surprised how great this track was to drive and by the availability texture improvements mods 4k, 8k and the ones from Overtake, but in all those packs the wires are always pixelated.
Maybe you could implement this as a upgrade part of your existing Laguna Seca mod
https://www.overtake.gg/threads/lush-green-laguna-seca-skin.178240/

Ordinarily not a problem but I'm unlikely to be anywhere near my gaming PC anytime soon. Didn't I already provide instructions so that anyone can do this? I thought I had. @Breathe is an expert now

 

[seminole17jr]

I think the mod is probably this one
Modders Squadra Corse Fiat Abarth 695 minicar
Only the skin seems to be in overtake (RD)

Yeah, just found the pic also, just for reference, thanks

 

[sDmD13]

@lorelord found something for ur tt rework. i watched this review of the 03 season and aiello crashed at lausitzring and then got the car of some junior but they changed the number to aiellos. so maybe u can do that skin aswell^^

 

[Breathe]

@Masscot a request, could you please modify the power/telephone wires from Kunos own Laguna Seca track, I was surprised how great this track was to drive and by the availability texture improvements mods 4k, 8k and the ones from Overtake, but in all those packs the wires are always pixelated.
Maybe you could implement this as a upgrade part of your existing Laguna Seca mod
https://www.overtake.gg/threads/lush-green-laguna-seca-skin.178240/

Ordinarily not a problem but I'm unlikely to be anywhere near my gaming PC anytime soon. Didn't I already provide instructions so that anyone can do this? I thought I had. @Breathe is an expert now

Remove the .txt extension

 

[SthrnOldskool]

Remove the .txt extension

View attachment 1366893

View attachment 1366894

thanks for doing this, but my brain is fried, where do we extract that to?

 

[Breathe]

thanks for doing this, but my brain is fried, where do we extract that to?

Sorry, I forget the folders. Fixed so, please redownload

 

[SthrnOldskool]

Sorry, I forget the folders. Fixed so, please redownload

thank you kind sir

Took a little break from doing Ralt RT3 skins based on real southern raced RT4's, to give myself something to drive.

 

[alexfre]

Good morning everyone!!
Would anyone be kind to help me?
Lately I don't understand why with the VRC "Touring Cars" I notice the FFB with my G29 too strong. I can't adjust it properly. This didn't happen with the first versions. I use the CSP version.
If I lower the force too much, the steering wheel has no resistance in turns.
A thousand thanks!!

 

[Fanapryde]

Good morning everyone!!
Would anyone be kind to help me?
Lately I don't understand why with the VRC "Touring Cars" I notice the FFB with my G29 too strong. I can't adjust it properly. This didn't happen with the first versions. I use the CSP version.
If I lower the force too much, the steering wheel has no resistance in turns.
A thousand thanks!!

are you using the FFB clip app ?

 

[lorelord]

@lorelord found something for ur tt rework. i watched this review of the 03 season and aiello crashed at lausitzring and then got the car of some junior but they changed the number to aiellos. so maybe u can do that skin aswell^^

If you can find some good quality photos I can look into it

 

[jac0]

Suzuki Swift Sport 2007 TRACK Public Release!!
Download:https://sharemods.com/gehe61ygd4gi/2007_suzuki_swift_track_101creative.zip.html
Converted From GT7
-AO inside and out
-Realistic Dashboard
-Physics
-CSP Settings
-Driver Animation
-Panoramic session Start config Daniel Nogal

View attachment 1366720View attachment 1366721View attachment 1366722View attachment 1366723View attachment 1366724View attachment 1366725

hi Peter, thanks for this wonderful addition! It's a beauty and sounds and feels amazing.
1 thing disturbing me thoug , is the side mirrors seem to have a "second" mirror which is the edge of the mirror...

So car Mirror 2 is the edge of the left side mirror (Mirror 1) , and Mirror 5 is the edge of the right side mirror (Mirror 4)

Don't know if this is done on purpose and if so for what reason, but it gives a pretty weird look,
and prob also takes away quite some GPU needlessly to have those extra "mirrors" rendered.
Any chance this can be turned off easily?

Also good luck with the health issues, hoping everything will end up fine for you both.
Take care!

 

[alexfre]

are you using the FFB clip app ?

No, i dont use the app

 

[24H]

Ferrari 641 by MNBA released

https://www.patreon.com/posts/release-ferrari-106669628

 

[Fall Guy]

Ferrari 641 by MNBA released

https://www.patreon.com/posts/release-ferrari-106669628

View attachment 1366920

ASR one is way better.

 

[alexfre]

ASR one is way better.

well, you should try it thoroughly, ACR physics is among the best!!

 

[MisterWaffles]

Ferrari 641 by MNBA released

https://www.patreon.com/posts/release-ferrari-106669628

View attachment 1366920

ASR one is way better.

well, you should try it thoroughly, ACR physics is among the best!!

The RSS Formula 1990 blows both of those mods clean out of the water. It's the 641 without logos pretty much.

 

[Gregz0r]

Comparing all three cars, the MNBA definitely has the most accurate-looking model, but ASR’s model is many years old by now.
The RSS cockpit has some things I’m not a fan of - shift lights & bulbous steering wheel.

The ASR has the best driver helmets and skins.

I wouldn’t blindly say the RSS drives best either, as the ASR is at least on a par, as are the sounds, imo.

I need to drive this MNBA to find out how also it drives and how it sounds.

 

[andrevr]

Good morning everyone!!
Would anyone be kind to help me?
Lately I don't understand why with the VRC "Touring Cars" I notice the FFB with my G29 too strong. I can't adjust it properly. This didn't happen with the first versions. I use the CSP version.
If I lower the force too much, the steering wheel has no resistance in turns.
A thousand thanks!!

Can I suggest you take a look at this, fellow Logi-User
Made a huge diffeference for me. And it makes the more/less FFB key-bind (default +/- I think) even better, as well.

Don't know if this is done on purpose and if so for what reason, but it gives a pretty weird look,
and prob also takes away quite some GPU needlessly to have those extra "mirrors" rendered.

Many road-cars have two-stage mirrors these days. The narrower outer part is very wide-angle and literally allows you to see beside you (so, at 90 degrees). No more blind-spot. This might be an attempt to emulate that?