Assetto Corsa PC Mods General DiscussionPC
- Thread starter daan
- 138,628 comments
- 37,854,960 views
- 1,443
- Sherbrooke, Québec,
- MastrFocus
- 25
- France
good evening
i have not managed to restore my csp settings. and i find myself without the lights at the beginning of my races. How to restore them? thank you
i have not managed to restore my csp settings. and i find myself without the lights at the beginning of my races. How to restore them? thank you
- 538
- Brazil
Trying to recreate the "Mille Miglia 1955" using different routes to represent the variety of the era (with what we have available).
Brescia ( TvCam )
S.Moss / D.Jenkinson - Mercedes 300 SLR
Brescia >> Ravenna ( TvCam )
U.Maglioli /L. Monteferrario - Ferrari 118 LM
Ravenna >> Rimini ( onboard )
S.Moss / D.Jenkinson - Mercedes 300 SLR
Ravenna >> Rimini ( TvCam )
S.Moss / D.Jenkinson - Mercedes 300 SLR
Just for information on how I'm trying to simulate the "Mille Miglia 1955".
I'm using 20 different cars (most of them are available for download on websites, some I adapted and others I invented).
-Ferrari 118/121 LM / Ferrari 750 Monza
-Mercedes 300 SLR / Mercedes 300 SL
-AM DB3s / AM DB2.4
-Jaguar D-Type
-Maserati A6GCS / A6GCS Coupe / 300s
-Lancia D24 / Aurelia B20
-Triumph TR2
-Austin-Healey 100s
-Gordini T24s
-Porsche 550 Spyder / 356
-Alfa Giulietta Sprint / Alfa 1900SS Zagato
-Fiat 8V
In total (62 participants).
1. Stage 1: for this route (I recorded the times of all the cars, as it was done individually), but I only recorded the main ones.
2. Stage 2: according to the numbering (starting order), I grouped them into groups of 5, 6 or 7 cars (I chose one to drive) and kept a note of the times of the "AI cars".
3. Stage 3: I did another shuffle (divided into 15 groups of 4 or 5)..still according to the starting order (the last 30 were separated into pairs).
As in the first part of the route (in the real race), the slowest cars arrived as time went by, that's how I did it.
In the other stages (routes), I will change a little more.
Brescia ( TvCam )
S.Moss / D.Jenkinson - Mercedes 300 SLR
Brescia >> Ravenna ( TvCam )
U.Maglioli /L. Monteferrario - Ferrari 118 LM
Ravenna >> Rimini ( onboard )
S.Moss / D.Jenkinson - Mercedes 300 SLR
Ravenna >> Rimini ( TvCam )
S.Moss / D.Jenkinson - Mercedes 300 SLR
Just for information on how I'm trying to simulate the "Mille Miglia 1955".
I'm using 20 different cars (most of them are available for download on websites, some I adapted and others I invented).
-Ferrari 118/121 LM / Ferrari 750 Monza
-Mercedes 300 SLR / Mercedes 300 SL
-AM DB3s / AM DB2.4
-Jaguar D-Type
-Maserati A6GCS / A6GCS Coupe / 300s
-Lancia D24 / Aurelia B20
-Triumph TR2
-Austin-Healey 100s
-Gordini T24s
-Porsche 550 Spyder / 356
-Alfa Giulietta Sprint / Alfa 1900SS Zagato
-Fiat 8V
In total (62 participants).
1. Stage 1: for this route (I recorded the times of all the cars, as it was done individually), but I only recorded the main ones.
2. Stage 2: according to the numbering (starting order), I grouped them into groups of 5, 6 or 7 cars (I chose one to drive) and kept a note of the times of the "AI cars".
3. Stage 3: I did another shuffle (divided into 15 groups of 4 or 5)..still according to the starting order (the last 30 were separated into pairs).
As in the first part of the route (in the real race), the slowest cars arrived as time went by, that's how I did it.
In the other stages (routes), I will change a little more.
Last edited:
- 1,443
- Sherbrooke, Québec,
- MastrFocus
I also tag each car with my own tag and create all my race grid, "open wheel' is my only non personnal tagInteresting, so these tags like “open wheeler” “F1”, “1923” “RWD” or whatever are also for certain aspects of the car. Just delete a whole bunch and changed it to tags that are for me more usefully.
BTW think @Papifix is talking about the flash view of some floating cars without 4 wheels in the distance. I have the same, was thinking it has to do with bad made LOD’s as not all the cars have that hovering appearance at the distance. Luckily the members here can explain that correctly and even give tips to correct.
Attachments
- 1,244
- United States
Track has been updated to version 3.1. Use the link in the quote to get the new version.
You might want to make a backup of your existing track folder first in case you don't like the changes. I believe it is safe to drag the contents folder to the root 'assettocorsa' directory and overwrite when it asks, but I would suggest disabling and deleting any of my previous track skins first.
-- Grass texture changes. I was never very happy with how the grass looked. This version I like much better. It's the grass texture setup I made for Pittsburgh International and it looks more natural, at least on my end.
- 87
- South Africa
Hi Guys
Wasn't happy with my last update, Liqui Moly concrete texture looked a bit flat with too many shadows. Have created a new one which blends perfectly with track.
Wanted to adjust night lighting a bit but that didn't go so well, am way to ocd to just make a few tweaks. Eventually spent hours completely redoing night lighting, adding missing light textures, adding new lights, adding missing light shadows, adjusting colors and more.
Also fixed fps issue on main straight at night (caused by night lighting), night lighting is now balanced without any performance issues.
Update details v1.2:
- More loading screens added
N.B. Deactivate skins and reactivate new skins in Content Manager for new textures to show
Wasn't happy with my last update, Liqui Moly concrete texture looked a bit flat with too many shadows. Have created a new one which blends perfectly with track.
Wanted to adjust night lighting a bit but that didn't go so well, am way to ocd to just make a few tweaks. Eventually spent hours completely redoing night lighting, adding missing light textures, adding new lights, adding missing light shadows, adjusting colors and more.
Also fixed fps issue on main straight at night (caused by night lighting), night lighting is now balanced without any performance issues.
Update details v1.2:
- Night lighting complete rework with several new settings
- Fixed fps issue on main straight at night (caused by night lighting)
- Adjusted all light colors, ranges, fade, spot, sharpness etc.
- Adjusted all flood lights
- Adjusted all pit building lights
- Adjusted all grandstand lights
- General light settings and colors adjusted, clean, crisp with balanced and good fps performance
- Added missing light shadows around the track and set
- Added missing light tetxures around the track and set
- Added missing light textures and shadows in tunnels, set too
- Illuminated all brake markes and set
- Illuminated all turn signs and set
- Illuminated all pit signs and set
- Illuminated yellow and black corner direction signs and set
- Illuminated camera man towers a bit and set
- Illuminated tunnel entry billboard/map a bit and set
- Illuminated blue bridge textures a bit and set
- Adjusted bridge lighting
- Illuminated all tents a bit and set
- Illuminated Grand Valley Speedway banner and set
- Illuminated all track overhanging banners and set
- Illuminated food trucks a bit and set
- Illuminated pit building windows a bit and set
- New Liqui Moly concrete wall texture
- Several material adjustments added and set
- More loading screens added
N.B. Deactivate skins and reactivate new skins in Content Manager for new textures to show
Last edited:
- 30
- United States
No fix here sadly, but just wanted to chime to say I've been noticing the same thing recently (most recent csp preview). Pretty much have the same settings you have there too. Was working fine previously (adds awesome detail if anyone doesn't have it on)
Don't know how many know about this car pack, I only found them recently because a group I race online with is big into the US Trans Am series, but a pack for the TA Class was released a little bit ago (another car added to the pack last week). They're actively being developed, not by me, but the creator is active on social media / discord. And unless I missed another mod I think it's the first time we get to play around with the top spec in the US Trans Am series in AC.
Only limited time using them (no races yet), but they're a lot of fun to throw around. They're a bit different from the VRC TA2 cars if you've ever driven those, a bit more grip and power to deal with, better braking, less body roll, but still will bite hard you if you're not careful. I believe all the cars in the pack are the same under the hood power and physics wise, but you (currently) have 5 "shells" to choose from. Here is a link if anyone wanted - https://vr506.gumroad.com/l/transam_pack
Had to whip up this quick skin once I saw this livery for the Mustang in online photos
Trans Am 2023 #20 Chris Dyson - TA Ford Mustang
Here is a quick recreation of Chris Dyson's #20 Ford Mustang (image found in an article about his own racing team website launch in 2023). Link to the car (and full pack) can be found in the download (actively being developed VR506 Simulation...
www.overtake.gg
Here's an onboard for a lap around Road Atlanta to give you an idea on how they drive
Last edited by a moderator:
- 64
- Malaysia
If anyone hasn't responded to this, yes there is a way. This is my go to code and format in the ext_config which I kinda toyed around to have that effect.
[BRAKEDISC_FX]
ACTIVE = 1
CERAMIC = 0 ; use ceramic look
CARVED = 1 ; add a bit of carving, radial lines (fast for shader to compute)
CARVED_FREQUENCY = 12 ; increase to make more lines
ALPHA_MASK = 0.0, 0.75
LUMINOCITY_MASK = 1.0, 0.0
NORMAL_MASK = 1.0, 0.0
REFLECTION_F0= 0.44, 0.06
REFLECTION_SHARPNESS=150, 200
[BRAKEDISC_FX_FRONT]
DISC_RADIUS = 0.192
DISC_INTERNAL_RADIUS = 0.123
GLOW_OFFSET= 1.0
[BRAKEDISC_FX_REAR]
DISC_RADIUS = 0.188 ; radius of a brake disc
DISC_INTERNAL_RADIUS = 0.121 ; radius of an inside part of a brake disc
GLOW_OFFSET= 1.0
- 226
- Colombia
Hi everyone, I need help, some of the recent released cars have this problem, the car move the wheels, but the car dont run, Im using CSP0.1.80 prev1, is there eny fix to this bug? thank you in advance
Attachments
- 538
- Brazil
- 65
- Italy
which tracks do you use?
- 427
- United Kingdom
- 58
- Hong Kong
- 316
- Belgium
- Mightylieven
I am building an app for ac. anybody know why the button is not clickable? The button shows but I can't click on it...
import ac
class ButtonTestApp:
def init(self):
# Create the app window
self.app_window = ac.newApp("Button Test")
ac.setSize(self.app_window, 200, 200)
# Label to show button click status
self.label = ac.addLabel(self.app_window, "Press the button")
ac.setPosition(self.label, 10, 50)
# Button to trigger click event
self.button = ac.addButton(self.app_window, "Click Me")
ac.setPosition(self.button, 10, 100)
ac.setSize(self.button, 180, 30)
ac.addOnClickedListener(self.button, self.on_button_click)
def on_button_click(self, *args):
# Update the label when the button is clicked
ac.setText(self.label, "Button Clicked!")
button_test_app = None
def acMain(ac_version):
global button_test_app
button_test_app = ButtonTestApp()
return "Button Test"
def acUpdate(deltaT):
global button_test_app
if button_test_app:
pass
import ac
class ButtonTestApp:
def init(self):
# Create the app window
self.app_window = ac.newApp("Button Test")
ac.setSize(self.app_window, 200, 200)
# Label to show button click status
self.label = ac.addLabel(self.app_window, "Press the button")
ac.setPosition(self.label, 10, 50)
# Button to trigger click event
self.button = ac.addButton(self.app_window, "Click Me")
ac.setPosition(self.button, 10, 100)
ac.setSize(self.button, 180, 30)
ac.addOnClickedListener(self.button, self.on_button_click)
def on_button_click(self, *args):
# Update the label when the button is clicked
ac.setText(self.label, "Button Clicked!")
button_test_app = None
def acMain(ac_version):
global button_test_app
button_test_app = ButtonTestApp()
return "Button Test"
def acUpdate(deltaT):
global button_test_app
if button_test_app:
pass
Last edited:
- 798
- Italy
Is there a real reason why the “open wheeler” tag bs is still on?
- 243
- Franconia
The fix is only for the cockpit view and the value under "Main" (not "Outside main") should be changed from 10 to 16 (not 20 to 16). That works for me as only 6 cars in the middle of the field have no tires. My test car is the stock Kunos Lotus 49. You should check, whether you changed other LOD settings under "GRAPHICS ADJUSTMENTS" and reset it to default.
- 89
- American Samoa
Charging money for Forza models sure is a business strategy these days it seems. Should just start extracting all the Forza models and sell them on gumroad, Would make bank it appears.
- 983
- Montserrat
No fix here sadly, but just wanted to chime to say I've been noticing the same thing recently (most recent csp preview). Pretty much have the same settings you have there too. Was working fine previously (adds awesome detail if anyone doesn't have it on)
Don't know how many know about this car pack, I only found them recently because a group I race online with is big into the US Trans Am series, but a pack for the TA Class was released a little bit ago (another car added to the pack last week). They're actively being developed, not by me, but the creator is active on social media / discord. And unless I missed another mod I think it's the first time we get to play around with the top spec in the US Trans Am series in AC.
View attachment 1391187
Only limited time using them (no races yet), but they're a lot of fun to throw around. They're a bit different from the VRC TA2 cars if you've ever driven those, a bit more grip and power to deal with, better braking, less body roll, but still will bite hard you if you're not careful. I believe all the cars in the pack are the same under the hood power and physics wise, but you (currently) have 5 "shells" to choose from. Here is a link if anyone wanted - https://vr506.gumroad.com/l/transam_pack
Had to whip up this quick skin once I saw this livery for the Mustang in online photos
View attachment 1391186Trans Am 2023 #20 Chris Dyson - TA Ford Mustang
Here is a quick recreation of Chris Dyson's #20 Ford Mustang (image found in an article about his own racing team website launch in 2023). Link to the car (and full pack) can be found in the download (actively being developed VR506 Simulation...
Here's an onboard for a lap around Road Atlanta to give you an idea on how they drive
8 bucks for FM rips man that stings a bit
- 72
- United Kingdom
Thanks Joe.
Just one question, since there are multiple grass skin options which one is the updated one? or are they all updated? or do you mean the skins are not needed as you have updated the original/default grass?
- 1,443
- Sherbrooke, Québec,
- MastrFocus
CSP uses this flag for guessing some parameters if not set explicitly (for example, for how sparks or tyres would look, or even how car is rendered in rendering queue) by default it tries to detect this value from tags in “ui_car.json”Is there a real reason why the “open wheeler” tag bs is still on?
- 538
- Brazil
Trieste
Similar threads
