Hybrid in GT4 ^_^, save game & code in the 1st post

  • Thread starter sucahyo
  • 1,161 comments
  • 156,647 views
Say, Sucahyo... Could you do some more research on the subject of rims? The codes you gave out always crash the game...
Even common rims code like BBS or Falken ? Ok. I will research it.

And on that matter - the turbo/NA stuff still doesn't work in all cases. I managed to attach NA engines to Turbo cars using "1D09" as the turbo, but attaching Turbo/Race engines to NA cars still won't work in many cases. As an example, I tried installing a 787B engine in a Mazda Cosmo Sports - but it keeps crashing, regardless of the turbo/NA code I use. Any help?
I also tried that and fail. I think we should change the value of A2A700 too. Or we just can't use racing engine. I think I will try to copy the entire race car equipment code.

Hey Mr. Sucahyo, I have some good news….. the last code you gave me (above) for “All Parts Purchased” worked!!!…..
That's a good news :). This means the NTSC code works :).

I converted it to Gameshark format with my MaxConvert converter and with the cheat on , the first car in the garage shows that all the parts are chosen, but only the parts that you can normally buy are the ones that you can actually put on the car and work.
Yes, that is how it works.

Also with the cheat still on, any other car you get into gets the “all parts purchased” set up (until you switch off to game/cheat)………….BUT, the disadvantage is that if you did nothing to the car before you got into it, the weight of the car remains the same as original, and you can’t get it any lighter after the cheat is put on because with the cheat all the Weight Reductions are already purchased and you can’t do it anymore, so the car has to remain with the full weight.
I can remove the weight modification or any ireversible upgrade from all equipped code, but I still don't have time to find it one by one.

Also, (I’m not sure if this affects the car negatively yet) when you go to purchase rims for the car, the highlighted type are “Snow Tyres” and the whitish highlight doesn’t shift to any of the other types, but in the settings area you can choose other tyres ( like S.S. Slicks), but even if you save the game there, when you go into the Rim choosing section the “Snow Tyres” are still highlighted. (I only fear the this may affect tyre grip on asphalt and the visual tyre/rim size diameter increase you normally get when Racing Slicks are
I see. Maybe we should research this more.

Sucahyo, does this mean that I'm any closer to using codes like those from your PAL hybrid Database with codes for all codes for all cars on my NTSC PS 2 version of GT4?
Yes. If you use gameshark code then you can do this:
Raw NTSC gameshark code = PAL PHaste code - $AE00

Try this:
change your car id to Bentley Speed 8 Race Car `03

PAL PHaste code = 20A2A5D0 000003B0

Raw NTSC gameshark code = 20A2A5D0 - AE00
Raw NTSC gameshark code = 20A1F7D0

Raw NTSC gameshark code = 20A1F7D0 000003B0

NTSC gameshark code = 25901B7C 3EB483CC
 
Hi everybody.
I m watching your hybrid progress since long time.you done well.
Thank you .
Lots of things can be made by this way.i consider if we can use more than two cabrios/convertibles in a race.i know this can make game unstable but i want to give it a try :)
Thank you again for your affords.👍
 
Yes. If you use gameshark code then you can do this:
Raw NTSC gameshark code = PAL PHaste code - $AE00

Try this:
change your car id to Bentley Speed 8 Race Car `03

PAL PHaste code = 20A2A5D0 000003B0

Raw NTSC gameshark code = 20A2A5D0 - AE00
Raw NTSC gameshark code = 20A1F7D0

Raw NTSC gameshark code = 20A1F7D0 000003B0

NTSC gameshark code = 25901B7C 3EB483CC


So, does that mean the code you're telling me to use is :
20A1F7D0 000003B0
25901B7C 3EB483CC
 
I also tried that and fail. I think we should change the value of A2A700 too. Or we just can't use racing engine. I think I will try to copy the entire race car equipment code.

I tried (on the Mazda Cosmo-Sports):

  • Attaching 787B engine, stock ("Ford Ka") turbo, regular A2A700: Crash
  • 787B engine, 787B turbo, regular A2A700: Crash
  • 787B engine, stock ("Ka") turbo, 787B A2A700: Crash
  • 787B engine, 787B turbo, 787B A2A700: Crash

So I guess they won't work on cars which cannot receive Turbos.
 
i consider if we can use more than two cabrios/convertibles in a race.i know this can make game unstable but i want to give it a try :)
Thanks :). What do you mean by two convertible in a race?


So, does that mean the code you're telling me to use is :
20A1F7D0 000003B0
25901B7C 3EB483CC
Only the last one:
25901B7C 3EB483CC



I tried (on the Mazda Cosmo-Sports):

  • Attaching 787B engine, stock ("Ford Ka") turbo, regular A2A700: Crash
  • 787B engine, 787B turbo, regular A2A700: Crash
  • 787B engine, stock ("Ka") turbo, 787B A2A700: Crash
  • 787B engine, 787B turbo, 787B A2A700: Crash

So I guess they won't work on cars which cannot receive Turbos.
Mazda cosmo, is that Mazda 110s? don't Mazda 110S have turbo upgrade?

I try this:
proto spirra:
using minolta 88c-v drivetrain, engine, exhaust, race mod, turbo = works
using minolta 88c-v engine, exhaust, race mod, turbo = works
using minolta 88c-v engine, exhaust, turbo = works
using minolta 88c-v engine, turbo = works

TVR Tamora:
using Mazda 787B engine, exhaust, race mod, turbo = works

BMW M3 CSL:
using Mazda 787B engine, turbo = crash
using Mazda 787B engine, race mod, turbo = crash
using Mazda 787B engine, exhaust, race mod, turbo = works
using Mazda 787B engine, exhaust, turbo = works


about the rim code, my mistake, I forgot to add the second line of the code. I will fix rim code in my website today.
 
Thanks :). What do you mean by two convertible in a race

i mean is it possible to race with 6 open top cars(cabrios) at the same time on a track.
in single races if you open the top you can race only with one oppenent.is there a code or something to race full grid with convertibles?
:D Thanks.
 
i mean is it possible to race with 6 open top cars(cabrios) at the same time on a track.
in single races if you open the top you can race only with one oppenent.is there a code or something to race full grid with convertibles?
:D Thanks.
I think it's possible, what race permit us to choose to open the top?

how do you open the convertible?when i race with a cabrio,it automatically closes,and i never say an option to open it.
I read somewhere that when we enter certain race, we have the option to close or open the top. Unfortunately I forgot where I read it.
 
Thanks :). Only the last one:
25901B7C 3EB483CC

That did not work as a Gameshark code, if that is what you intended. the game froze when I tried to enter the garage.
I should point out to you that when I converted the Codebreaker code that worked earlier, the results after the conversion to a gameshark code was:

254FCBD6 EB8F9EF7
254FC9D6 EB8F9E47
254FC9D6 EB8F9E67

That is the code that worked on my NTSC GT4 on my PS2
 
I see. I get the wrong code to compare before, sorry, can you try this:

Raw NTSC gameshark code = PAL PHaste code - 1CB80

Try this:
change your car id to Bentley Speed 8 Race Car `03
PAL PHaste code = 20A2A5D0 000003B0

Raw NTSC gameshark code = 20A2A5D0 - 1CB80
Raw NTSC gameshark code = 20A0DA50
Raw NTSC gameshark code = 20A0DA50 000003B0

NTSC gameshark code = 25D09B7C 3E3495CC


Try this code:
25D09B7C 3E3495CC
 
I see. I get the wrong code to compare before, sorry, can you try this:

Raw NTSC gameshark code = PAL PHaste code - 1CB80

Try this:
change your car id to Bentley Speed 8 Race Car `03
PAL PHaste code = 20A2A5D0 000003B0

Raw NTSC gameshark code = 20A2A5D0 - 1CB80
Raw NTSC gameshark code = 20A0DA50
Raw NTSC gameshark code = 20A0DA50 000003B0

NTSC gameshark code = 25D09B7C 3E3495CC


Try this code:
25D09B7C 3E3495CC

no... it didn't work
 
?
Do you use special setting when converting from codebreaker to gameshark?

Try this, this should not crash the game:
Car ride height is 255 for set C
2547994E FA25D7FE


If not working right, this should change anything else on the suspension, try to drive the car to the track and notice anything unusual, set the car setting to "C" setup first.

If working try this too:


Car ride height is 255 for set A
25079A4E FAA5D57E

Car ride height is 255 for set B
2507BA4E FA25D76E

Hope it works.....
 
I think it's possible, what race permit us to choose to open the top?

I read somewhere that when we enter certain race, we have the option to close or open the top. Unfortunately I forgot where I read it.
how do you open the convertible?when i race with a cabrio,it automatically closes,and i never say an option to open it.

You can switch between open and closed-top racing when doing an Arcade-Mode race. Picking "Closed" top means there'll be 6 cars in the field. Picking "Open" means only two cars will race.

I assume what the requestor meant was the ability to race 6 open-top cars - probably through some ARMax code.

Thanks :). What do you mean by two convertible in a race?


Only the last one:
25901B7C 3EB483CC



Mazda cosmo, is that Mazda 110s? don't Mazda 110S have turbo upgrade?

I try this:
proto spirra:
using minolta 88c-v drivetrain, engine, exhaust, race mod, turbo = works
using minolta 88c-v engine, exhaust, race mod, turbo = works
using minolta 88c-v engine, exhaust, turbo = works
using minolta 88c-v engine, turbo = works

TVR Tamora:
using Mazda 787B engine, exhaust, race mod, turbo = works

BMW M3 CSL:
using Mazda 787B engine, turbo = crash
using Mazda 787B engine, race mod, turbo = crash
using Mazda 787B engine, exhaust, race mod, turbo = works
using Mazda 787B engine, exhaust, turbo = works


about the rim code, my mistake, I forgot to add the second line of the code. I will fix rim code in my website today.

I see a pattern here - the exhaust and racemod seems very substantial to the success. I'll do more experimenting.

However, even the RX-7, which is obviously a Turbo-car, didn't work with the 787B engine.
 
I see. I guess we have to keep experimenting.

about all convertible have open top, I think I can't help finding the code since the game crash when entering arcade race.
 
Thanks.
yes i meant open-top in arcade races.sorry for poor explanation.:)
i wish we can race spiders and roadster race with open top cars forexample.
Thanks for your effords.i like the exitement of this forum.
gt4 will be much more fun with hybrids.👍
 
Thanks.
yes i meant open-top in arcade races.sorry for poor explanation.:)
i wish we can race spiders and roadster race with open top cars forexample.
Thanks for your effords.i like the exitement of this forum.
gt4 will be much more fun with hybrids.👍
I think it's cool if we can do more with GT4, with so many car available, there is so many things to do :).
 
?
Do you use special setting when converting from codebreaker to gameshark?

Try this, this should not crash the game:
Car ride height is 255 for set C
2547994E FA25D7FE


If not working right, this should change anything else on the suspension, try to drive the car to the track and notice anything unusual, set the car setting to "C" setup first.

If working try this too:


Car ride height is 255 for set A
25079A4E FAA5D57E

Car ride height is 255 for set B
2507BA4E FA25D76E

Hope it works.....

put the code on with a totally stock car at the top of the garage and nothing happened............ Am I supposed to buy suspension for the car first?
 
Hi
I can´t download the Files in the 1.Post. If the Window "d.turboupload.com" let me save the File, i look at my Desktop. The downloaded Files are only 0 KB...it´s not enough for a .max...So, where is the Problem.:-(

Sorry for da bad English..I´m a German. ;-)
 
I have the same problem, though I did successfully download the Motor Carriage save earlier in the day. I see some of the saves toward the bottom are not even available for download any more.
 
suchayo, ive tried the raise ride height to 255 for setup a on my GT4 and it dont work, i'll try a few more tonight.
PS i have the north american version
 
suchayo, ive tried the raise ride height to 255 for setup a on my GT4 and it dont work, i'll try a few more tonight.
PS i have the north american version

Hey, what's up? I have the North American Version too, did you try the "all parts unlocked" code?, I tried it and it worked (see a few pgaes earlier), but nothing else so far yet
 
well that didn't work....... do you have another code that I could try....like a wheel size code
That's bad. I don't have other code right now, but I try to convert big wheel code later.

I can´t download the Files in the 1.
I see some of the saves toward the bottom are not even available for download any more.
Thanks for the info, I will try to host it on more reliable site, but it could take a couple of day to upload it all.

suchayo, ive tried the raise ride height to 255 for setup a on my GT4 and it dont work, i'll try a few more tonight.
PS i have the north american version
gameshark code?

I think all equipped code for NTSC gameshark is:
254FCBD6 EB8F9EF7
254FC9D6 EB8F9E47
254FC9D6 EB8F9E67
 
Hey, what's up? I have the North American Version too, did you try the "all parts unlocked" code?, I tried it and it worked (see a few pgaes earlier)
no not yet
gameshark code?

I think all equipped code for NTSC gameshark is:
254FCBD6 EB8F9EF7
254FC9D6 EB8F9E47
254FC9D6 EB8F9E67

yes i forgot to mention it was the code, ill try the above here in a few
 
That's bad. I don't have other code right now, but I try to convert big wheel code later.

thanks Sucahyo

sucahyo
Gameshark code?

I think all equipped code for NTSC gameshark is:
254FCBD6 EB8F9EF7
254FC9D6 EB8F9E47
254FC9D6 EB8F9E67

Yes, that's the Gameshark code GT40 MkII......... but check out my post earlier on either pg 36 of pg37 about the weight thing
 
Back