Hybrid in GT4 ^_^, save game & code in the 1st post

  • Thread starter sucahyo
  • 1,161 comments
  • 157,367 views
You can change the colours of a car only to the colors it usually comes with - including special liveries, of course - but not to colours which don't usually come on the car. Which prevents an uber-awesome TVR Reflex-coloured Mazda 787B from being created.


Ich war schneller. :sly:
 
Yes..i understand... But how i can do it change with the AR2..On my Laptop no Emulator workes, it´s to slowly..Framerates from 8-9Frames..
... In the List Bodycodes are 3Codes..the last is yz2a588cgkgqn..Is that the Code for the Colors? Or what i must do to chang the Color?

Greeting Stefan
 
I've downloaded the game saves and converted them to x-port as it's all I have but now I get a disc read error on my ps2 (I haven't used it since GT3). Any ideas how to get a copy of the disc that will boot up on my ps2?

Excellent work on the hybrids everyone - I hope I get a chance to drive one or two....
 
I need NTSC U/C Codebreaker codes not PAL.

ME TOOOOO!!!

Sucahyo...any luck in trying to help us.......all I want for now are the codes for: 1) R-Tune NISMO skyline engine, 2)Mitsubishi EVO MR engine, 3) highest % increase Stage 4 Turbo (maybe from the Toyota GT-One) and 4) the wheel/tyre with S/Slick from a Tommy KairaZZII.........remember we got the code fro "all parts unlocked" to work earlier.........HELP!!!!
 
ME TOOOOO!!!

Sucahyo...any luck in trying to help us.......all I want for now are the codes for: 1) R-Tune NISMO skyline engine, 2)Mitsubishi EVO MR engine, 3) highest % increase Stage 4 Turbo (maybe from the Toyota GT-One) and 4) the wheel/tyre with S/Slick from a Tommy KairaZZII.........remember we got the code fro "all parts unlocked" to work earlier.........HELP!!!!
I need a volunteer to make a save game created after activating "Hybrid try out code". Too bad it seems no one has both NTSC GT4 and NTSC ARMAX.
 
I need a volunteer to make a save game created after activating "Hybrid try out code". Too bad it seems no one has both NTSC GT4 and NTSC ARMAX.

so Sucahyo, can't you work with codes that are on the Gameshark site with the basic codes that work, work for you as a base......in the meantime I will try to get the NTSC ARMAX and I will get back to you
 
so Sucahyo, can't you work with codes that are on the Gameshark site with the basic codes that work, work for you as a base......in the meantime I will try to get the NTSC ARMAX and I will get back to you
Ok.

About gameshark code, unfortunately the area where hybrid code need to changed can not be calculated from available NTSC gameshark code. The address has different offset on different cheat engine.

BTW, Thank to guys at gtrp.de most of the body code car name can be identified.

I have update my site with this info.
 
I need a volunteer to make a save game created after activating "Hybrid try out code". Too bad it seems no one has both NTSC GT4 and NTSC ARMAX.


Ibelieve that I have both. I just need to know, very explicitly, what to do. I don't speak code btu I can probably do what it is that you need once it is explained(read as "dumbed down") to me.
 
Ok.

BTW, Thank to guys at gtrp.de most of the body code car name can be identified.

I have update my site with this info.

Wow...what crazy People do that?
The Peoples they have encoded the List are Enno1 , moses , Mike R32 and me StefanD. We´ve now all Cars but only Nissan are in work. I think, next Weekend it is ready!

Greeting from the Germancrew from gtrp.de:)

And big Thanx to Sucahyo for do this all for us!👍
 
Ibelieve that I have both. I just need to know, very explicitly, what to do. I don't speak code btu I can probably do what it is that you need once it is explained(read as "dumbed down") to me.
Ok. What I need is a gamesave with activated code.

So the step is:
- activate this code:
VNKE-QJYP-QTWEG
0YB8-G0VJ-H4R1N
9MC5-9JX3-E6HPY


- if the game not freeze, create a gamesave.

I will see at what address the code actually overwrite and make correction to make a working code.


The Peoples they have encoded the List are Enno1 , moses , Mike R32 and me StefanD. We´ve now all Cars but only Nissan are in work. I think, next Weekend it is ready!
Big thanks to you all too :).
 
you see, I don't know where to install this code, nor do I understand how to get the emulator to work on my PC.

Ok , see if this helps.......enter the first thread by Playguy.... the one the "The Complete Guide to Hybrids...." and follow exactly what he says to do step by step
 
you see, I don't know where to install this code, nor do I understand how to get the emulator to work on my PC.
I don't mean to run it on pc. Run it on PS2 like usual. Do you know how to add code in ARMAX?

What I mean is, on your PS2:
insert ARMAX disc

add this code to your ARMAX, GT4 section:
VNKE-QJYP-QTWEG
0YB8-G0VJ-H4R1N
9MC5-9JX3-E6HPY

enable master code and this code

insert GT4 disc

run your GT4.
wait until loaded
go to garage, save.

after save completed, reset

insert ARMAX disc

copy the gamesave to USB drive

and then from computer copy the gamesave from usb drive to one of free file hosting like:
http://s14.turboupload.com/
 
Well I figured out why this doesn't make sense. I don't have AR Max, I just have a Max Drive...I will get the AR Max and we will start this over again. I have to wait until the fifteenth though...pay day et al...sorry lads, I goofed again
 
I thought I'd give this a try. I have a codelist that contains GT4 codes, so I added your code under it. ARMAX started to launch the game, the first screen with all of the Copyright or Trademark info or whatever displays, it clears, and then nothing else happens.

I double-checked my code with yours.

VNKE-QJYP-QTWEG
0YB8-G0VJ-H4R1N
9MC5-9JX3-E6HPY

I re-entered it, just in case I made a mistake the first time. I even confirmed that your second line uses zeros and not letter "O"'s using Notepad.

This code doesn't appear to work. I tried to create a new game entry using the master code defined on Codejunkies, but, as expected, it claimed the entry already existed.

I did see a few, other master codes on the internet for GT4, but I haven't tested them. Codejunkies should be accurate. Also, I didn't see your code under the Codejunkies list of cheats. What does your code do?

I can try new codes if you have them. I can already get game saves, as I want to play around with them myself.

Edit: Bah...realized that game saves likely won't have the mileage data. No 0.0 mileage Supra RZ on the PS2, as I don't plan to run an altered PS2 and game disc just for that. :rolleyes:
 
hey buddy, are you helping with the PAL version or the NTSC version?

currently I've got only the pal version but I believe i could get the ntsc version too.. I've just got so little free time these days I can't say anything about how long it will take or something
 
I thought I'd give this a try. I have a codelist that contains GT4 codes, so I added your code under it. ARMAX started to launch the game, the first screen with all of the Copyright or Trademark info or whatever displays, it clears, and then nothing else happens.

I double-checked my code with yours.

VNKE-QJYP-QTWEG
0YB8-G0VJ-H4R1N
9MC5-9JX3-E6HPY

I re-entered it, just in case I made a mistake the first time. I even confirmed that your second line uses zeros and not letter "O"'s using Notepad.
Sorry, I don't recognize that code.

What we do in this thread is to make car with other car engine, or something like that.

check this site too for more code:
http://gt.cellphonespec.com


currently I've got only the pal version but I believe i could get the ntsc version too.. I've just got so little free time these days I can't say anything about how long it will take or something
Nice :).
 
Ok, so .. I just started learn hybriding last night (at last) and got pcxs2 working really nice and fast.
I haven't done anything yet because the corruption problem is distracting me.

First I transferred my own gt4 save to the pcsx memory card with the boot.elf / cd image method and got it working, or so i thought.
The current car works like it should but only some of the others work as well. It seems to be totally random which cars work and which doesn't.

One car with zero mileage and no upgrades works but another similar one doesn't which has been upgraded and driven. Still there are other cars which work regardless of upgrades or mileage.

Then I loaded a hybrid garage with the V6 Honda Beat and Lexus which I've been playing a lot.
I had bought the save a couple new cars with PS2 earlier and none of them works, only the cars which had been originally saved in the emulator worked when playing in pcsx.

Is there any new info about this bug what causes it or anything how to get around it?
I've been thinking my own way but it's pretty slow one:
* First, hybrid a car you want and save it, then extract and transfer the save to PS2.
* On PS2, buy a new car and enter into it, you should get now a working hybrid to your garage that's not your current car (if this works).
* Then transfer the save back to your computer, start pcsx and hybrid the new car you bought or buy a new one.

It looks possible that the encryption key used to save your garage is calculated from the platform (hardware) you're running GT4 with or, something like this..
So, until the pcsx2 team releases a new version with emulates the hardware 100% we won't get easy way to build garages full of hybrids :(


Edit: I'd like to have the all parts purchased and 1.000.000.000 credits codes for PAL, in phaste format (couldn't find them anywhere) :)
 
That Problem caused by bug in PCSX2 that corrupted memody card read or write. In GT4 this make garage file corrupted, so any file not currently used that has data in garage file will be broken. Unfortunately this bug won't be fix soon.

For PAL Phaste?
Try this for max money:
20A2AAA8 44B14400
20A2AAAC 44B14400

And this for equip all:
20A2AA5C FFFFFFFF
20A2AA60 FFFFFFFF
20A2AA64 FFFFFFFF
 
<object width="425" height="350"><param name="movie" value="http://www.youtube.com/v/Bjf7zKK7Tw0"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/Bjf7zKK7Tw0" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"></embed></object>

Anyone care to make a hybrid LS1 Skyline :sly:
 
Back