Hybrid in GT4 ^_^, save game & code in the 1st post

[Speed Drifter]

A: I have AR Max EVO. I don't know if it's PAL, NTSC or if it matters. It won't take the code for all parts purchased, because I assume my ARMAX EVO has an NTSC master code?

B: Have we found an easy way to convert PAL codes to NTSC or do they have to done from scratch?

A:
I don't think it matters which region your cheat device is made for.
I believe the code you've tried is made for PAL game and that's why it doesn't work

B:
Yes it's possible, the layout is exactly the same between different regions of the game and you don't need any dirty tricks to get codes working.
It's as easy as using calculator, if the codes I posted earlier work like I think they should. Try them out if you want to help us

Speed Drifter, thank you for the efforts! I asked you to simply plug in some values and drivetrain and call it a day, but you actually went through it and tried--very elaborately, it seems--to actually make it, well, work. Thank you very, very much. I've never entered a hybrid via AR Max, though, so I'm a bit confused as to how I enter the codes. Do I just enter them and it is automatically applied to my Prius (and only my Prius), or do I need to do something fancy like apply a button-activation thing to them?

Yep, you enter the codes and switch them on. After that they're automatically applied to whichever car you're currently in, so you need to get into the Prius beforehand and save your game
It's not very convenient but it's the only way to make hybrids with cheat devices. I'll post the proper savegame later so you'll get all three setups with little effort, it must be time-consuming to enter hundreds of codes for each different hybrid you want to make

Either way, though, I won't be able to test the car very soon because the parental units just discovered that I'm pretty far behind on my (10th grade, if you must know) homework, and decided to rob me of my Playstation until it's all recovered, so I'll only have it back in a week or two.

I'm sorry to hear that, let's hope you get your PS2 back soon
In the meanwhile you can give me more ideas of hybrids I could realize, my goal is to build a big hybrid garage which has only working cars in it

Yeh. I noticed that. Not sure how I would subtract "0x11C80" from a code formatted for AR Max or GS. Let's hope sucahyo can help us out

EDIT: Good news is I just got GT4 runnign on PCSX2. So maybe I'll be able to figure this out.

EDIT 2: 20A2A608 000005A1
+
0X11C80
=
20A18988 000005A1?

Yep, you're on the right track
If you want to convert encoded codes (AR Max, Gameshark, etc) you need to decode them first with maxconvert (http://www.codemasters-project.net/portal-english/apportal/download.php?view.6)

I'm just uncertain about 0x11C80, The AR max codes (money related, NTSC ver) I got from the official site are using the same addresses as pcsx2, so the conversion factor should be to subtract 0xAE00 from PAL raw codes.
I'll convert the codes with your factor if it seems that the ones I made earlier don't work after all

But today i have something for you guys to test.You know,from the beginning of the GT4 hybriding times,i was always bugged because we could only hybrid one car per save.
I always tried to find methods to overcome that glitch,and today i found this little tool.
http://www.csclub.uwaterloo.ca:11068/mymc/

pretty cool, huh? I just discovered this same little program last night when I couldn't get any sleep, just forgot to test it out. It will save me a lot of time because I need frequently transfer saves from the PS2 to the emulator

 

[Death Scythe]

Yeh. I noticed that. Not sure how I would subtract "0x11C80" from a code formatted for AR Max or GS. Let's hope sucahyo can help us out

EDIT: Good news is I just got GT4 runnign on PCSX2. So maybe I'll be able to figure this out.

EDIT 2: 20A2A608 000005A1
+
0X11C80
=
20A18988 000005A1?

Actually, I thought chaotica was talking about the PHASTE codes (for hybridding on the pc). It looked like he was refering to RAW codes in the post, maybe if he can chime in we can work together to hybrid NTSC. I remember that old savegame I tested, with the GSX/R hybrid and it worked (I reuploaded a "tuned" version of it a while back. I'm trying to get another ARMAX Disc because mine's is shot (reads when it wants to), however I have a Codebreaker disc that works (I can test saves, I have a tool for converting the .max to codebreaker format). I'd like to try out some PHASTE codes since I can play gt4 on my pc as well, if anyone has any NTSC codes. I'm going to try the ones I put up earlier (dunno if they work since I can't figure out if I did the 0x11C80 math properly between NTSC/PAL for raw codes). Hopefully, I'll have some positive results! As far as that offset goes, from what I gathered on chaotica's post, the math was PAL Address - 0x11C80 = NTSC address? Any thoughts on that?

-l8r

 

[Speed Drifter]

I believe he's talking about the codes that work on real PS2, since "Phaste" codes (actually the memory locations) are the ones you use with emulator and they're what I'm familiar with

Here are some example Phaste codes for the U.S. ver of the game that work with pcsx2
(the same Prius codes I converted to AR Max format)

10A1F92E 00001000 Multiply power by 4x
00A1F932 00000054 Weight down by ~200kg
20A1FC64 FFFFFF03 Have all tires
10A1F810 00000A6E R34 V-spec II Nur '02 drivetrain with VCD
10A1F828 00001C08 R34 V-spec II Nur '02 LSD Full customize
20A1F90C 02000200 Ride height 512 f/r
10A1F912 00000101 Spring rate 0,1 f/r

They apply for the current car you're in because that's the only car you can edit at a time


Edit:
Playguy, looks like that Mymc tool works, at least PS2 save builder is able to read them ... I mean read the .max files it creates out of pcsx2 memory cards

 

[teknogeek]

Actually, I thought chaotica was talking about the PHASTE codes (for hybridding on the pc). It looked like he was refering to RAW codes in the post, maybe if he can chime in we can work together to hybrid NTSC. I remember that old savegame I tested, with the GSX/R hybrid and it worked (I reuploaded a "tuned" version of it a while back. I'm trying to get another ARMAX Disc because mine's is shot (reads when it wants to), however I have a Codebreaker disc that works (I can test saves, I have a tool for converting the .max to codebreaker format). I'd like to try out some PHASTE codes since I can play gt4 on my pc as well, if anyone has any NTSC codes. I'm going to try the ones I put up earlier (dunno if they work since I can't figure out if I did the 0x11C80 math properly between NTSC/PAL for raw codes). Hopefully, I'll have some positive results! As far as that offset goes, from what I gathered on chaotica's post, the math was PAL Address - 0x11C80 = NTSC address? Any thoughts on that?

-l8r

I can test the PHAST codes on the NTSC version if you feel like giving the code conversion another shot . But from what Speed Drifter mentioned I'm not sure how we would do that. Can we modify the PHAST codes with the -0x11C80? Or is it a different layout?

 

[Death Scythe]

I believe he's talking about the codes that work on real PS2, since "Phaste" codes (actually the memory locations) are the ones you use with emulator and they're what I'm familiar with

Here are some example Phaste codes for the U.S. ver of the game that work with pcsx2
(the same Prius codes I converted to AR Max format)

10A1F92E 00001000 Multiply power by 4x
00A1F932 00000054 Weight down by ~200kg
20A1FC64 FFFFFF03 Have all tires
10A1F810 00000A6E R34 V-spec II Nur '02 drivetrain with VCD
10A1F828 00001C08 R34 V-spec II Nur '02 LSD Full customize
20A1F90C 02000200 Ride height 512 f/r
10A1F912 00000101 Spring rate 0,1 f/r

They apply for the current car you're in because that's the only car you can edit at a time


Edit:
Playguy, looks like that Mymc tool works, at least PS2 save converter is able to read them

Ok, I just got in so I'll try those out. I got my pcsx2 up w/ a garage w/ some cash n cars (figured a .pnatch to make every purchase ADD money not subtract it)

add this to your .pnatch file
//BUYING INCREASES credits
patch=1,EE,2043AFD0,word,0051282F

I'm interested in trying the NTSC PCSX2/Phaste Hybrid method, since my ARMAX disc pooped itself, I can get the save on the emulator, and export it to codebreaker format and put it on my ps2 that way.

EDIT:

I'm trying phaste, now I enter the codes in the Xploder code check? Or Write Address, and if I Write It, do I hit the addcode (S,M,L) checkbox? Adding it to the Xploder code check and updating it doesn't seem to work?

 

[teknogeek]

Ok, I just got in so I'll try those out. I got my pcsx2 up w/ a garage w/ some cash n cars (figured a .pnatch to make every purchase ADD money not subtract it)

add this to your .pnatch file
//BUYING INCREASES credits
patch=1,EE,2043AFD0,word,0051282F

I'm interested in trying the NTSC PCSX2/Phaste Hybrid method, since my ARMAX disc pooped itself, I can get the save on the emulator, and export it to codebreaker format and put it on my ps2 that way.

Awesome. I have next to NO knowledge when it comes to locating or changing variables in PHAST. Let me know if you need anything.

 

[Speed Drifter]

I'm trying phaste, now I enter the codes in the Xploder code check? Or Write Address, and if I Write It, do I hit the addcode (S,M,L) checkbox? Adding it to the Xploder code check and updating it doesn't seem to work?

I'm so confused now, they should work right away when you click on update code. Maybe the PHaste isn't that straightforward to use after all

try removing the leading zeroes from the code values, I don't remember anymore how the Phaste handles the values .. or maybe it's easier if I do it for you:

10A1F92E 1000
00A1F932 54
20A1FC64 FFFFFF03
10A1F810 06FC
10A1F810 0A6E
10A1F828 10CC
10A1F828 1C08
20A1F90C 02000200
10A1F912 0101

if you're just starting to learn:
select only one code at first, click on "moveaddress" and input the code address there to find the right location faster.
(for example 10A1F810 06FC has address A1F810)

then input the code you selected into the xploder box and click on "update cheat code"
the memory address of your code should now read the value you just input, in reversed byte form = 06FC should read FC06

I'll post tomorrow an empty NTSC save and the save I've been working on, if anyone has use for them

 

[teknogeek]

I'll post tomorrow an empty NTSC save and the save I've been working on, if anyone has use for them

Cool cool. Looking forward to it. I like surprises

 

[Playguy]

Ok,speed drifter,try the save in the ps2 and see if it still gives the glitch,please.

 

[Speed Drifter]

Trust me, I know what I'm doing
I found a workaround how to get multiple hybrids that work on the ps2, which sadly means they're not working on the emulator

Every time you want to switch cars you have to do it on your ps2, then save the game and transfer the save to the pcsx2. It's slow and sometimes even irritating but it's the only way until pcsx2 team fixes the bug on their emulator

 

[teknogeek]

Ok. I've just acquired the PAL version. I plan on making a contribution. Probably not tooooooo innovative(hex = ugggg, lol). But a quality helping

EDIT: WELL. IT turn out my "PAL" version isn't PAL... Everything time I apply a PHAST code it doesn't work. The on;y thing my version is good for is loading game saves. This is ridiculous.

I'm snapping in PHAST, Updating Cheat-code. It changes the address value. But nothing happends. Terrible!

 

[teknogeek]

Ok, I just got in so I'll try those out. I got my pcsx2 up w/ a garage w/ some cash n cars (figured a .pnatch to make every purchase ADD money not subtract it)

add this to your .pnatch file
//BUYING INCREASES credits
patch=1,EE,2043AFD0,word,0051282F

I'm interested in trying the NTSC PCSX2/Phaste Hybrid method, since my ARMAX disc pooped itself, I can get the save on the emulator, and export it to codebreaker format and put it on my ps2 that way.

EDIT:

I'm trying phaste, now I enter the codes in the Xploder code check? Or Write Address, and if I Write It, do I hit the addcode (S,M,L) checkbox? Adding it to the Xploder code check and updating it doesn't seem to work?

Yeh. None will work for me either. Thoes look like Xploder codes.



I've got a question. I'm trying to find out where the turbo code is located for the Civic R, EK9. the 97' model. How do I "snap" or find the difference in code after I purchase a turbo?

 

[Speed Drifter]

Yeh. None will work for me either. Thoes look like Xploder codes.

I've got a question. I'm trying to find out where the turbo code is located for the Civic R, EK9. the 97' model. How do I "snap" or find the difference in code after I purchase a turbo?

Maybe they look like Xploder codes if Phaste actually uses the same format as Xploder?

Installed "turbo kit" values for Setup A are in these locations:
BESCES-51719 PAL = A2A680 & A2A681
BASCUS-97328 NTSC = A1F880 & A2A681

if your game has different ID you need to find out the correct location for the settings yourself
I'm having hard time helping you because I don't know yet what's the exact reason you can't get the codes working

here's a partial memory dump from the pal version which had Carina ED '89 as the current car:

+ 0 1 2 3 4 5 6 7 8 9 A B C D E F
00A2A5D0 29 03 00 00 00 00 00 00 FF FF FF FF FF FF FF FF Setup A car id
00A2A5E0 5D 00 00 00 2A 00 00 00 01 00 00 00 00 00 00 00 body & color
00A2A5F0 F6 0A 00 00 01 00 00 00 A5 04 00 00 02 00 00 00
00A2A600 7A 08 00 00 06 00 00 00 5C 08 00 00 0C 00 00 00
00A2A610 1F 09 00 00 0A 00 00 00 C5 10 00 00 0B 00 00 00
00A2A620 7B 11 00 00 03 00 00 00 EF 12 00 00 18 00 00 00
00A2A630 90 9C 00 00 19 00 00 00 8A 9C 00 00 1A 00 00 00
00A2A640 0A 00 00 00 09 00 00 00 FF FF FF FF FF FF FF FF
00A2A650 78 08 00 00 07 00 00 00 FF FF FF FF FF FF FF FF
00A2A660 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A2A670 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A2A680 1D 09 00 00 0E 00 00 00 FF FF FF FF FF FF FF FF Turbo & Flywheel
00A2A690 B8 0C 00 00 15 00 00 00 FF FF FF FF FF FF FF FF Clutch & Driveshaft
00A2A6A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A2A6B0 2C 00 00 00 04 00 00 00 0E 00 00 00 05 00 00 00
00A2A6C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A2A6D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A2A6E0 51 0C D5 0C F9 07 2A 05 B1 03 DB 02 00 00 00 00 gear ratios
00A2A6F0 00 00 00 00 00 00 00 00 68 0F 00 00 68 0F 00 01
00A2A700 01 00 00 00 00 00 00 00 00 00 00 00 A0 00 A0 00
00A2A710 80 80 18 16 5A 5A 01 01 01 01 01 01 01 01 01 01 toe, ,dampers
00A2A720 00 00 00 00 00 00 04 0B 0B 0B 0B 00 00 00 00 00 TCS/ASM
00A2A730 FF FF 64 64 64 00 00 00 00 00 00 00 00 00 00 00 multipliers
00A2A740 00 00 00 00 00 00 00 00 29 03 00 00 00 00 00 00 Setup B id
00A2A750 FF FF FF FF FF FF FF FF 5D 00 00 00 2A 00 00 00 body
00A2A760 01 00 00 00 00 00 00 00 F6 0A 00 00 01 00 00 00 color & brakes

00A2AA20 FF FF 64 64 64 00 00 00 00 00 00 00 00 00 00 00 Setup C multipliers
00A2AA30 00 00 00 00 00 00 00 00 FF FF FF FF FF FF FF FF
00A2AA40 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A2AA50 FF FF FF FF FF FF FF FF 00 00 00 00 15 0A 0A 08
00A2AA60 00 00 01 04 10 00 02 00 60 7C 9F 03 C0 D8 27 4B
00A2AA70 00 1B B7 4A 00 00 00 00 00 1B 37 4A 00 00 00 00 oil, dirtyness, rigidity
00A2AA80 00 00 00 00 00 00 00 00 0A 00 00 00 CC EC 04 9F
00A2AA90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A2AAA0 17 00 00 00 00 00 00 00 15 62 70 6C 70 6F 72 7A money "bplporz"
00A2AAB0 A9 48 23 65 00 00 00 00 20 7A 68 00 F0 FF 00 00

NTSC version, Prius '03 touring:

00A1F7D0 59 00 00 00 00 00 00 00 FF FF FF FF FF FF FF FF Setup A car id
00A1F7E0 4A 00 00 00 2A 00 00 00 06 00 00 00 00 00 00 00
00A1F7F0 5B 08 00 00 01 00 00 00 A5 04 00 00 02 00 00 00
00A1F800 BF 05 00 00 06 00 00 00 BF 05 00 00 0C 00 00 00
00A1F810 FC 06 00 00 0A 00 00 00 28 0E 00 00 0B 00 00 00
00A1F820 C3 0E 00 00 03 00 00 00 08 1C 00 00 18 00 00 00
00A1F830 73 8F 00 00 19 00 00 00 6D 8F 00 00 1A 00 00 00
00A1F840 0A 00 00 00 09 00 00 00 FF FF FF FF FF FF FF FF
00A1F850 BF 05 00 00 07 00 00 00 FF FF FF FF FF FF FF FF
00A1F860 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A1F870 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A1F880 1D 09 00 00 0E 00 00 00 FF FF FF FF FF FF FF FF Turbo
00A1F890 B8 0C 00 00 15 00 00 00 FF FF FF FF FF FF FF FF
00A1F8A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A1F8B0 2C 00 00 00 04 00 00 00 0E 00 00 00 05 00 00 00
00A1F8C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A1F8D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A1F8E0 E8 03 E8 03 00 00 00 00 00 00 00 00 00 00 00 00
00A1F8F0 00 00 00 00 00 00 00 00 11 10 00 00 11 10 00 01
00A1F900 01 00 00 00 00 00 00 00 00 04 0D 00 00 02 00 02
00A1F910 80 86 01 01 62 4F 01 01 01 01 01 01 01 01 01 01
00A1F920 05 05 05 05 05 05 00 00 00 00 00 00 00 00 00 10
00A1F930 FF FF 5C 64 64 00 00 00 00 00 00 00 00 00 00 00 Setup A multipliers
00A1F940 00 00 00 00 00 00 00 00 59 00 00 00 00 00 00 00 A1F9408 Setup B car id


00A1FC50 FF FF FF FF FF FF FF FF 00 00 00 00 15 0A 0A 08
00A1FC60 00 00 01 04 FF FF FF 03 00 00 00 00 00 00 00 00
00A1FC70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A1FC80 00 00 00 00 00 00 00 00 01 00 00 00 80 73 0A 12
00A1FC90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A1FCA0 0E 00 00 00 00 00 00 00 44 2B 62 6C 70 6F 72 7A Money
00A1FCB0 1D 4E 35 22 00 00 00 00 20 7A 68 00 F0 FF 00 00

 

[teknogeek]

Maybe they look like Xploder codes if Phaste actually uses the same format as Xploder?

Installed "turbo kit" values for Setup A are in these locations:
BESCES-51719 PAL = A2A680 & A2A681
BASCUS-97328 NTSC = A1F880 & A2A681

if your game has different ID you need to find out the correct location for the settings yourself
I'm having hard time helping you because I don't know yet what's the exact reason you can't get the codes working

here's a partial memory dump from the pal version which had Carina ED '89 as the current car:



NTSC version, Prius '03 touring:

Ok. I'll try some of that. Apparently I do have the correct PAL and NTSC version.

Is that a direct dump from PHAST? If so. How did you do it? I've tried copying and pasting but it never seems to get the whole thing

I figured I'd try dumping a stock car. Then adding a turbo. Then dumping again and comparing.


EDIT:

NTSC
Befor Turbo:

00A1F880  FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15

After Turbo:

00A1F880  FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15

No difference

I snapped PHAST, copied the "00A1F880" adress to notepad, then bought and installed a turbo. Then snapped PHAST again. And there was no difference in code. Am I doing this rite?

 

[Speed Drifter]

Is that a direct dump from PHAST? If so. How did you do it? I've tried copying and pasting but it never seems to get the whole thing

NTSC
Befor Turbo:

00A1F880  FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15

After Turbo:

00A1F880  FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15

No difference

I snapped PHAST, copied the "00A1F880" adress to notepad, then bought and installed a turbo. Then snapped PHAST again. And there was no difference in code. Am I doing this rite?

I just copypasted those lines straight from the PHaste, not perfect but enough for me

I don't recognize those data patterns, are you sure you're using the TLB (non VM) version of the pcsx2?
Phaste doesn't work with the virtual memory version of the program, that's the one which doesn't say "TLB non VM" and has the filename pcsx2.exe

 

[Death Scythe]

Here's mine, NTSC, Prius Touring as the top car

00A2A680  1D 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A1F880  BF 05 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15

car still shows 80hp... I applied the codes, both ways, updated and then snapped pcsx2 again to see make sure it applied. It shows like it did, but nogo. My game ud, NTSC SCUS-97328, dunno if thats any usefull. I'ma try playing with phaste, to see if it can catch what changed when I equip/unequip parts, maybe we have a different version of the game? (got mines when it first came out, wayyyy back).

-l8r

 

[teknogeek]

I just copypasted those lines straight from the PHaste, not perfect but enough for me

I don't recognize those data patterns, are you sure you're using the TLB (non VM) version of the pcsx2?
Phaste doesn't work with the virtual memory version of the program, that's the one which doesn't say "TLB non VM" and has the filename pcsx2.exe

Your prius.

00A1F7D0 59 00 00 00 00 00 00 00 FF FF FF FF FF FF FF FF Setup A car id
00A1F7E0 4A 00 00 00 2A 00 00 00 06 00 00 00 00 00 00 00
00A1F7F0 5B 08 00 00 01 00 00 00 A5 04 00 00 02 00 00 00
00A1F800 BF 05 00 00 06 00 00 00 BF 05 00 00 0C 00 00 00
00A1F810 FC 06 00 00 0A 00 00 00 28 0E 00 00 0B 00 00 00
00A1F820 C3 0E 00 00 03 00 00 00 08 1C 00 00 18 00 00 00
00A1F830 73 8F 00 00 19 00 00 00 6D 8F 00 00 1A 00 00 00
00A1F840 0A 00 00 00 09 00 00 00 FF FF FF FF FF FF FF FF
00A1F850 BF 05 00 00 07 00 00 00 FF FF FF FF FF FF FF FF
00A1F860 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A1F870 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A1F880 1D 09 00 00 0E 00 00 00 FF FF FF FF FF FF FF FF Turbo
00A1F890 B8 0C 00 00 15 00 00 00 FF FF FF FF FF FF FF FF
00A1F8A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A1F8B0 2C 00 00 00 04 00 00 00 0E 00 00 00 05 00 00 00
00A1F8C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A1F8D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A1F8E0 E8 03 E8 03 00 00 00 00 00 00 00 00 00 00 00 00
00A1F8F0 00 00 00 00 00 00 00 00 11 10 00 00 11 10 00 01
00A1F900 01 00 00 00 00 00 00 00 00 04 0D 00 00 02 00 02
00A1F910 80 86 01 01 62 4F 01 01 01 01 01 01 01 01 01 01
00A1F920 05 05 05 05 05 05 00 00 00 00 00 00 00 00 00 10

My prius.

00A1F7D0 00 00 00 00 00 00 00 00 FF 29 75 15 00 00 00 00
00A1F7E0 FF FF FF FF FF FF FF FF 2D 2D 2D 2D 2D 2D 2D 2D
00A1F7F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A1F800 00 00 00 00 00 00 00 00 FF 29 75 15 00 00 00 00
00A1F810 FF FF FF FF FF FF FF FF 2D 2D 2D 2D 2D 2D 2D 2D
00A1F820 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A1F830 00 00 00 00 00 00 00 00 FF 29 75 15 00 00 00 00
00A1F840 FF FF FF FF FF FF FF FF 2D 2D 2D 2D 2D 2D 2D 2D
00A1F850 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A1F860 00 00 00 00 00 00 00 00 FF 29 75 15 FF 29 75 15
00A1F870 FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15
00A1F880 FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15
00A1F890 FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15
00A1F8A0 FF 29 75 15 FF 29 75 15 00 00 00 00 00 00 00 00
00A1F8B0 00 00 00 00 00 00 00 00 75 00 00 00 22 00 00 00
00A1F8C0 FF 29 75 15 00 00 00 00 FF FF FF FF FF FF FF FF
00A1F8D0 2D 2D 2D 2D 2D 2D 2D 2D 00 00 00 00 00 00 00 00
00A1F8E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A1F8F0 FF 29 75 15 00 00 00 00 FF FF FF FF FF FF FF FF
00A1F900 2D 2D 2D 2D 2D 2D 2D 2D 00 00 00 00 00 00 00 00
00A1F910 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A1F920 FF 29 75 15 00 00 00 00 FF FF FF FF FF FF FF FF

Totaly different

I'm using pcsx2t.exe. That the wrong EXE? V 0.9.1.

EDIT: Says non-vm at the top.

 

[Death Scythe]

I just copypasted those lines straight from the PHaste, not perfect but enough for me

I don't recognize those data patterns, are you sure you're using the TLB (non VM) version of the pcsx2?
Phaste doesn't work with the virtual memory version of the program, that's the one which doesn't say "TLB non VM" and has the filename pcsx2.exe

edit, just looked at yours, matches mine's perfectly. I'm running pcsxt.exe, not the vm one, I tried running it in XP 32, no luck, I was running it under Vista Ultimate, no go (even w/ compatability on), must be something trivial?

 

[teknogeek]

Would a "patched" version of GT4_NTSC make a difference? I have the original that's been patched for a DVD5 that I'm running. I'm re-ripping hte game to my HDD as the full dual-layer.

 

[Death Scythe]

Would a "patched" version of GT4_NTSC make a difference? I have the original that's been patched for a DVD5 that I'm running. I'm re-ripping hte game to my HDD as the full dual-layer.

I dunno, mines is definitely unpatched original gt4 and I got the same output as you. I'm thinking its something we're misisng, because, id's match n everything just our output = fubar. I just tried 2 different os' Vista, Vista w/ XP Compatability, XP Pro, nothing (ran slower in true XP, kinda funny). maybe I should try 0.9.1 not 0.9.2 of pcsx2, gonna find and d/l it now (maybe thats the issue lol).

 

[teknogeek]

I dunno, mines is definitely unpatched original gt4 and I got the same output as you. I'm thinking its something we're misisng, because, id's match n everything just our output = fubar. I just tried 2 different os' Vista, Vista w/ XP Compatability, XP Pro, nothing (ran slower in true XP, kinda funny). maybe I should try 0.9.1 not 0.9.2 of pcsx2, gonna find and d/l it now (maybe thats the issue lol).

Yours matches Speed's, or mine?

EDIT: Just updated to 0.9.2, and am using a full dvd9 rip. Still the same code

I wouldn't have a problem if I could dump/export the whole PHAST code snap. Then I would just compare the 2 and find the code myself. Unless this code looks totally messed?

 

[Speed Drifter]

I found the difference in offset between our versions

yours:

00A1F7D0 00 00 00 00 00 00 00 00 FF 29 75 15 00 00 00 00
00A1F7E0 FF FF FF FF FF FF FF FF 2D 2D 2D 2D 2D 2D 2D 2D
00A1F7F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A1F800 00 00 00 00 00 00 00 00 FF 29 75 15 00 00 00 00
00A1F810 FF FF FF FF FF FF FF FF 2D 2D 2D 2D 2D 2D 2D 2D
00A1F820 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A1F830 00 00 00 00 00 00 00 00 FF 29 75 15 00 00 00 00
00A1F840 FF FF FF FF FF FF FF FF 2D 2D 2D 2D 2D 2D 2D 2D
00A1F850 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A1F860 00 00 00 00 00 00 00 00 FF 29 75 15 FF 29 75 15
00A1F870 FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15
00A1F880 FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15
00A1F890 FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15
00A1F8A0 FF 29 75 15 FF 29 75 15 00 00 00 00 00 00 00 00
00A1F8B0 00 00 00 00 00 00 00 00 75 00 00 00 22 00 00 00
00A1F8C0 FF 29 75 15 00 00 00 00 FF FF FF FF FF FF FF FF
00A1F8D0 2D 2D 2D 2D 2D 2D 2D 2D 00 00 00 00 00 00 00 00
00A1F8E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A1F8F0 FF 29 75 15 00 00 00 00 FF FF FF FF FF FF FF FF
00A1F900 2D 2D 2D 2D 2D 2D 2D 2D 00 00 00 00 00 00 00 00
00A1F910 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A1F920 FF 29 75 15 00 00 00 00 FF FF FF FF FF FF FF FF

mine:

0098A220  00 00 00 00 00 00 00 00 FF 29 75 15 00 00 00 00
0098A230  FF FF FF FF FF FF FF FF 2D 2D 2D 2D 2D 2D 2D 2D
0098A240  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0098A250  00 00 00 00 00 00 00 00 FF 29 75 15 00 00 00 00
0098A260  FF FF FF FF FF FF FF FF 2D 2D 2D 2D 2D 2D 2D 2D
0098A270  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0098A280  00 00 00 00 00 00 00 00 FF 29 75 15 00 00 00 00
0098A290  FF FF FF FF FF FF FF FF 2D 2D 2D 2D 2D 2D 2D 2D
0098A2A0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0098A2B0  00 00 00 00 00 00 00 00 FF 29 75 15 FF 29 75 15
0098A2C0  FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15
0098A2D0  FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15
0098A2E0  FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15
0098A2F0  FF 29 75 15 FF 29 75 15 00 00 00 00 00 00 00 00
0098A300  00 00 00 00 00 00 00 00 75 00 00 00 22 00 00 00
0098A310  FF 29 75 15 00 00 00 00 FF FF FF FF FF FF FF FF
0098A320  2D 2D 2D 2D 2D 2D 2D 2D 00 00 00 00 00 00 00 00
0098A330  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0098A340  FF 29 75 15 00 00 00 00 FF FF FF FF FF FF FF FF
0098A350  2D 2D 2D 2D 2D 2D 2D 2D 00 00 00 00 00 00 00 00
0098A360  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0098A370  FF 29 75 15 00 00 00 00 FF FF FF FF FF FF FF FF

I'm using 0.9.2 non VM version, but I don't think the emulator version matters that much.
It looks like my copy of the NTSC version is a DVD5 patched one
Oh well, so much for my AR max codes then

 

[Death Scythe]

Yours matches Speed's, or mine?

EDIT: Just updated to 0.9.2, and am using a full dvd9 rip. Still the same code

I wouldn't have a problem if I could dump/export the whole PHAST code snap. Then I would just compare the 2 and find the code myself. Unless this code looks totally messed?

mine's matches yours, I was running 0.9.2, both in vista and xp, now I'm trying 0.9.1 lol seems like we're having the same issue. Now I'm back in vista and testing 0.9.1, maybe I got a bad version of phaste? I'm going to re/dl it again. I'll try the original (non-english ver) since the button layout should be the same [snap][move][write], etc... the hex output should be the same aswell

EDIT: I wonder how suchayo did the gsx/r hybrid I played with before???

 

[teknogeek]

I found the difference in offset between our versions

yours:

00A1F7D0 00 00 00 00 00 00 00 00 FF 29 75 15 00 00 00 00
00A1F7E0 FF FF FF FF FF FF FF FF 2D 2D 2D 2D 2D 2D 2D 2D
00A1F7F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A1F800 00 00 00 00 00 00 00 00 FF 29 75 15 00 00 00 00
00A1F810 FF FF FF FF FF FF FF FF 2D 2D 2D 2D 2D 2D 2D 2D
00A1F820 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A1F830 00 00 00 00 00 00 00 00 FF 29 75 15 00 00 00 00
00A1F840 FF FF FF FF FF FF FF FF 2D 2D 2D 2D 2D 2D 2D 2D
00A1F850 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A1F860 00 00 00 00 00 00 00 00 FF 29 75 15 FF 29 75 15
00A1F870 FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15
00A1F880 FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15
00A1F890 FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15
00A1F8A0 FF 29 75 15 FF 29 75 15 00 00 00 00 00 00 00 00
00A1F8B0 00 00 00 00 00 00 00 00 75 00 00 00 22 00 00 00
00A1F8C0 FF 29 75 15 00 00 00 00 FF FF FF FF FF FF FF FF
00A1F8D0 2D 2D 2D 2D 2D 2D 2D 2D 00 00 00 00 00 00 00 00
00A1F8E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A1F8F0 FF 29 75 15 00 00 00 00 FF FF FF FF FF FF FF FF
00A1F900 2D 2D 2D 2D 2D 2D 2D 2D 00 00 00 00 00 00 00 00
00A1F910 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00A1F920 FF 29 75 15 00 00 00 00 FF FF FF FF FF FF FF FF

mine:

0098A220  00 00 00 00 00 00 00 00 FF 29 75 15 00 00 00 00
0098A230  FF FF FF FF FF FF FF FF 2D 2D 2D 2D 2D 2D 2D 2D
0098A240  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0098A250  00 00 00 00 00 00 00 00 FF 29 75 15 00 00 00 00
0098A260  FF FF FF FF FF FF FF FF 2D 2D 2D 2D 2D 2D 2D 2D
0098A270  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0098A280  00 00 00 00 00 00 00 00 FF 29 75 15 00 00 00 00
0098A290  FF FF FF FF FF FF FF FF 2D 2D 2D 2D 2D 2D 2D 2D
0098A2A0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0098A2B0  00 00 00 00 00 00 00 00 FF 29 75 15 FF 29 75 15
0098A2C0  FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15
0098A2D0  FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15
0098A2E0  FF 29 75 15 FF 29 75 15 FF 29 75 15 FF 29 75 15
0098A2F0  FF 29 75 15 FF 29 75 15 00 00 00 00 00 00 00 00
0098A300  00 00 00 00 00 00 00 00 75 00 00 00 22 00 00 00
0098A310  FF 29 75 15 00 00 00 00 FF FF FF FF FF FF FF FF
0098A320  2D 2D 2D 2D 2D 2D 2D 2D 00 00 00 00 00 00 00 00
0098A330  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0098A340  FF 29 75 15 00 00 00 00 FF FF FF FF FF FF FF FF
0098A350  2D 2D 2D 2D 2D 2D 2D 2D 00 00 00 00 00 00 00 00
0098A360  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0098A370  FF 29 75 15 00 00 00 00 FF FF FF FF FF FF FF FF

I'm using 0.9.2 non VM version, but I don't think the emulator version matters that much.
It looks like my copy of the NTSC version is a DVD5 patched one
Oh well, so much for my AR max codes then

You are awesome! May I ask how you found this out? And how would I get to the correct code?

BTW, no difference between DVD5 and DVD9 for me.

 

[Speed Drifter]

You are awesome! May I ask how you found this out? And how would I get to the correct code?

BTW, no difference between DVD5 and DVD9 for me.

I copied the line that looked the most unique from your memory dump, input it to the Phaste's param search field and let it do the work, I was a bit lucky though

No difference between DVD5 and DVD9? this is getting even more complicated

I can't think anything clever and innovative right now but try these codes first, I converted them with the number chaotica gave us

10A18AAE 00001000 Multiply power by 4x
00A18AB2 00000054 Weight down by ~200kg
20A18DE4 FFFFFF03 Have all tires
10A18990 00000A6E R34 V-spec II Nur '02 drivetrain with VCD
10A189A8 00001C08 R34 V-spec II Nur '02 LSD Full customize
20A18A8C 02000200 Ride height 512 f/r
10A18A92 00000101 Spring rate 0,1 f/r

 

[teknogeek]

Hrmmm... I've got it....


My Prius starting adress: 00A18850
Yours Prius starting adress: 00A1F7D0



Quick question. Can I use a calculator to figure what
"59 00 00 00 00 00 00 00 FF FF FF FF FF FF FF FF" = ?

So I can easily change the data using Write Adress?

 

[teknogeek]

Ok. Now we have a problem... All those addresses and data line up... But they don't modify if I change a part or buy one....

Those codes don't work either.

 

[Speed Drifter]

You already found your starting address? nice job

I don't get what are you trying to do but you don't need to convert the values, they should be the same between different versions.
You've got the starting location now so it should be pretty easy.
sucahyo's site has the values for all different parts, just write them into the right locations.

Are you able to open microsoft excel files? I've been making a spreadsheet table of the locations I know, makes it easier to understand how this whole thing works

 

[Death Scythe]

Speed Drifter, do you think, just for haha's maybe we can use the offset between your version and our version? The codes work on yours, so if we do the math on the offsets, then it should work no? I'll try the math between the offsets and maybe come up with something (I sux @ hex lol)

 

[teknogeek]

I can get one. I have office around here somewhere. That would be cool.

When ever I snap PHAST after applying/buying a part, the variables don't change

Am I in the wrong setup?

EDIT: Haha. NVM. Got it

Wasn't doing enough "loading"? I went into the setting and changed the parts. Then it showed up as modified in PHAST.

If you need any help Death Scythe. I might be able to get ya started if you haven't gottin it already.

As far as versions go. I pre-oredered mine. So it's the first gen I assume. ISO is a total of 4.94 GB (5,314,478,080 bytes)