Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter daan
  • 138,567 comments
  • 37,828,287 views
@Jodurson re: pacenotes, there is a readme.txt in the archive.

1726760175476.png


You need to use the co-driver app (not the one from CSP).
 
Last edited:
New Parts folder is included in the skin pack. But despite I dragged all the content into extension folder, it doesn't work for me. Maybe I should do something appart
the "new parts" goes into the extension folder and you need to rename the skins that zin5ki made as none of them worked without renaming them or at leasat they did not for me.


when you check the car are you checking it in "showroom"? dont check it in CM showroom as it wont show all the ext_config stuff and it will appear borked when on track it is not
 
Last edited:
Here's a challenge for the braves, i've been tweaking the AI a bit lately and recreating some vintage races and i'm quite proud of this one. If you guys could have a look and give me feedbacks, i need to know if it's challenging enough.

We're going to reproduce this event : https://www.racingsportscars.com/entry/Oulton_Park-1962-03-17-27789.html



The track, Oulton Park by Reboot team : https://www.mediafire.com/file/hpdqaosz52nwvv9/rt_oulton_park_1.7.7z/file

The 60s track skin by shock_ : https://www.overtake.gg/threads/rt-oulton-park-early-1960s-skin.265867/

I'll be driving the Lotus 23 Cosworth Tuned by Alexlockout/Tuned AL : https://mega.nz/file/12cyEBDA#PHuzE7A5p4j-hr9WpzvV5141ezPPAxCmvgXvKCz61YI

The NeckFX for the Lotus and the graphic mods are available here ( i'm using "Cdimagined"'s ppfilter and "Tetri camera Tricks Fish Eye" Reshade preset for the vid, but i had excellent results with my ppfilters as well).


Now, here's the opponents selection :
-Austin Healey Sprite Sprint, Healey Sprite 3000mk1 and Healey Sprite KANSA from Velo/ACTK garage : https://www.assetto-fr.com/garage/austin_healey/

-TVR Griffith Series 200 : https://www.overtake.gg/downloads/tvr-griffith-200.25994/

-AC Ace from Simdream (should be replaced by a Shelby Cobra but the AI is driving very nicely with those) : https://www.assettoworld.com/car/ac-ace

-Triumph TR3B Race by Velo/Paul Williams : https://www.assetto-fr.com/garage/resultats.php?search=TR3B

-TCL MG-MGA(Race and Sprint) by Bazza's team : https://thracing.de/touring-car-legends/

-MG MGA Sprint from Velo : https://velosmodsworkshop.com/mg


Here's a modified version of the MGA that the AI will use : https://www.mediafire.com/file/q1hnj5fh26f06zq/content.7z/file

(that's part of the little experiment i've been running to get boosted AI cars, i'll soon go straight thru this solution as it allows you to engage proper setups for AI cars).

Got them all? Now here's the weekend and Quick race direct link : https://acstuff.club/s/13xt

Just in case something is not working properly on your side, here's my CSP AI New Behaviour settings : https://acstuff.club/s/PIqB

So far here's a video fighting for 14th position on lap 3 :



I'll see as well on youtube if i should aim for harder grids, but i wanted to have you guys feedback as well. With Cartuner and a few easy tweaks there's a real possibility of doing very challenging championships, i think that was needed.

If you have better versions of those cars available, let me know, i've been trying to get everything as curated as possible but there might be a few "cheap" mods in the bunch.

Same goes for my previous video available here that got a folder with new AI cars to download, and the whole quick Drive link to have a hell of a race, as the opponents will come from behind at some point.
 
Last edited:
F1 1998 - ROUND 10 - A1-Ring v1.0
Screenshot_ks_lotus_25_a1ring_1998_20-8-124-0-59-27.jpg

Conversion from rFactor.

-CSP recommended
-28 pit/start
-AI, cam

Credits & Thanks;
rFactor Track by Grand Prix Team (1998 Track Pack)
-Thank you for giving me permission

AC Converted by @shi (shin956)
AI by Viola_seven
Crowds texture by @Kniker97
cameraman, marshall and some textures by kunos
Test and Feedback by Breathe

Download (MEGA)

Enjoy.
 
the "new parts" goes into the extension folder and you need to rename the skins that zin5ki made as none of them worked without renaming them or at leasat they did not for me.


when you check the car are you checking it in "showroom"? dont check it in CM showroom as it wont show all the ext_config stuff and it will appear borked when on track it is not
Then I sholud test it. I changed the skinmap name from body to skin, then from skin to body, from body to body_map, so... I already don't know which is the correct name now :dunce:
 
Last edited:
Then I sholud test it. I changed the skinmap name from body to skin, then from skin to body, from body to body_map, so... I already don't know which is the correct name now :dunce:
looool bit confused? SKIN.dds is what you need to rename the main skin to.

The "body_map.png" i never touched dont even no what it does.....not alot from what i can see

if you still have issues i can just send you the entire car, everything works as it should on mine i have even got Zink5ki stuff to work on the OG skins so they have no passenger seat with working skins

what threw me of was looking in "CM showroom" instead of just "showroom" and wondering why it was always borked
 
Last edited:
It's z-fighting, and the reason it's more prominent with some tracks than others has to do with the precision of the depth buffer. On large tracks, the depth buffer will often be less precise because it has to be larger than on smaller tracks. For objects that are really close, a small change in the depth buffer precision like this can trigger z-fighting on some tracks, while others are just fine. Not really a track problem, and not really a car problem - just a synergy of bad luck. (Someone smarter than me explained it to me some time back.)

There are settings in CM that can aid in this, but I can't come up with any specific advise right now.

For reference, I have no similar problems with the same car on the same track, and I'm just running default settings for everything that should matter. And the Dallas/Cadillac is a really nice car. :)
After some searches, you could solve this issue by enable "double precision physics engine" on CSP settings.

but this setting was in old versions of CSP, but I don't have it in my version (CSP 0.2.3)

does someone know something about this setting right now ? Is there another setting to solve Zfighting on big tracks ?

Thanks
 
Last edited:
looool bit confused? SKIN.dds is what you need to rename the main skin to.

The "body_map.png" i never touched dont even no what it does.....not alot from what i can see

if you still have issues i can just send you the entire car, everything works as it should on mine i have even got Zink5ki stuff to work on the OG skins so they have no passenger seat with working skins

what threw me of was looking in "CM showroom" instead of just "showroom" and wondering why it was always borked
I'd be happy to take it too if you don't mind.
I was tired of changing stuff again and again (ended up wit a car without body work at a certain moment while it was OK in CM showroom etc...)
So I reinstalled the original car from my backup, with only the original skins...
 
FORD GT GT1 MATECH 2010

After a long time, it's finally out too. I would like to thank @Chem_Flummi infinitely for giving me a great help.

Original mod: BEM
3D updates: ChemFlummi, PaddockClubMods
Physics: ChemFlummi
Digital instruments: PaddockClubMods
Shaders/Scripts: PaddockClubMods, ChemFlummi
Animations: PaddockClubMods (this is why they suck LOL)
Sound: ChemFlummi
Skins rework: PaddockClubMods

The rules are always the same, no reuploads with other links and for anything we are here. 😎

Download --> https://mega.nz/file/T0ZGDCrC#osucHWp-fQ3d_psTFKh5hJIr3mZ3L92rmjHioAUDiK8 (updated version)
 

Attachments

  • Screenshot_bem_ford_gt_gt1_monza_10-8-124-14-51-3.jpg
    Screenshot_bem_ford_gt_gt1_monza_10-8-124-14-51-3.jpg
    105.5 KB · Views: 8
  • Screenshot_bem_ford_gt_gt1_monza_10-8-124-14-50-53.jpg
    Screenshot_bem_ford_gt_gt1_monza_10-8-124-14-50-53.jpg
    211.6 KB · Views: 4
  • Screenshot_bem_ford_gt_gt1_monza_10-8-124-14-50-42.jpg
    Screenshot_bem_ford_gt_gt1_monza_10-8-124-14-50-42.jpg
    215.4 KB · Views: 3
  • Screenshot_bem_ford_gt_gt1_imola_19-8-124-22-3-59.jpg
    Screenshot_bem_ford_gt_gt1_imola_19-8-124-22-3-59.jpg
    52 KB · Views: 5
  • Screenshot_bem_ford_gt_gt1_imola_19-8-124-22-2-30.jpg
    Screenshot_bem_ford_gt_gt1_imola_19-8-124-22-2-30.jpg
    85.7 KB · Views: 4
  • Screenshot_bem_ford_gt_gt1_imola_19-8-124-22-2-19.jpg
    Screenshot_bem_ford_gt_gt1_imola_19-8-124-22-2-19.jpg
    126.9 KB · Views: 3
  • Screenshot_bem_ford_gt_gt1_imola_19-8-124-22-1-8.jpg
    Screenshot_bem_ford_gt_gt1_imola_19-8-124-22-1-8.jpg
    85.5 KB · Views: 3
  • Screenshot_bem_ford_gt_gt1_imola_19-8-124-22-0-58.jpg
    Screenshot_bem_ford_gt_gt1_imola_19-8-124-22-0-58.jpg
    166.2 KB · Views: 3
  • Screenshot_bem_ford_gt_gt1_imola_19-8-124-22-0-38.jpg
    Screenshot_bem_ford_gt_gt1_imola_19-8-124-22-0-38.jpg
    87.5 KB · Views: 7
  • Screenshot_bem_ford_gt_gt1_imola_19-8-124-22-0-22.jpg
    Screenshot_bem_ford_gt_gt1_imola_19-8-124-22-0-22.jpg
    95.9 KB · Views: 7
  • Screenshot_bem_ford_gt_gt1_imola_19-8-124-21-59-53.jpg
    Screenshot_bem_ford_gt_gt1_imola_19-8-124-21-59-53.jpg
    181.8 KB · Views: 6
Last edited:
I'd be happy to take it too if you don't mind.
I was tired of changing stuff again and again (ended up wit a car without body work at a certain moment while it was OK in CM showroom etc...)
So I reinstalled the original car from my backup, with only the original skins...
Yeh i understand what you mean, sometimes i get so deep into stuff i forget what my name is let alone what i am meant to be doing

this is the entire car with everything, if there is anything wrong let me no im certainly not a pro but they look correct to me


https://mega.nz/file/9NNXwI4J#eXcDDgndxTzyNwaf0OVkKDjZj5QexIZS_CtcaEmEU60

any issues with mega let me no it should be good though
 
Last edited:
Yeh i understand what you mean, sometimes i get so deep into stuff i forget what my name is let alone what i am meant to be doing

this is the entire car with everything, if there is anything wrong let me no im certainly not a pro but they look correct to me


https://mega.nz/file/9NNXwI4J#eXcDDgndxTzyNwaf0OVkKDjZj5QexIZS_CtcaEmEU60

any issues with mega let me no it should be good though
All seemed to be OK, (Showrooms, previews, cockpit view etc)... until I watched a replay (with one of the new skins):
car lost parts, windscreen turned black, headlights turned on and off...something to do with LODS I assume.
But then I tried with one of the old skins and got no such issues there...
 
FORD GT GT1 MATECH 2010

After a long time, it's finally out too. I would like to thank @Chem_Flummi infinitely for giving me a great help.

Original mod: BEM
3D updates: ChemFlummi, PaddockClubMods
Physics: ChemFlummi
Digital instruments: PaddockClubMods
Shaders/Scripts: PaddockClubMods, ChemFlummi
Animations: PaddockClubMods (this is why they suck LOL)
Sound: ChemFlummi
Skins rework: PaddockClubMods

The rules are always the same, no reuploads with other links and for anything we are here. 😎

Download --> https://mega.nz/file/msZgnTSa#nCLWnsv3Z6J-YPDUjmN5qd0IHsy7XKbugi0GjA3cVW8
Nice updates. Thanks!
Great fun at Spa, and they burn a lot of sparks in the Eau Rouge dip. AI seems to crash and spin a little more than usual too, which is always welcome.
Not a fan of the 'shower screen' frosting on the windscreen in low sun (it's like driving through mist) so if you want, try the attached internal glass DDS for a more scratched/dirty version. Had to create a new DDS for this as the internal glass mapping is a little weird.


Also spotted some sun getting into the cockpit through bodywork seams so add this to the config to tidy those up:
Code:
 ;stop sun getting places it shouldn't
[SHADER_REPLACEMENT_...]
ACTIVE = 1
MATERIALS = WCCARBODY
CAST_SHADOWS = 1
DOUBLE_FACE_SHADOW_BIASED = 1
 
Hi, I downloaded the various Alfa Romeo Giulia GT/GTAm by elia misculini, but they don't have the real official Alfa Romeo skins of the time. Are there any skins for these mods? Thanks
 
FORD GT GT1 MATECH 2010

After a long time, it's finally out too. I would like to thank @Chem_Flummi infinitely for giving me a great help.

Original mod: BEM
3D updates: ChemFlummi, PaddockClubMods
Physics: ChemFlummi
Digital instruments: PaddockClubMods
Shaders/Scripts: PaddockClubMods, ChemFlummi
Animations: PaddockClubMods (this is why they suck LOL)
Sound: ChemFlummi
Skins rework: PaddockClubMods

The rules are always the same, no reuploads with other links and for anything we are here. 😎

Download --> https://mega.nz/file/msZgnTSa#nCLWnsv3Z6J-YPDUjmN5qd0IHsy7XKbugi0GjA3cVW8
Car has no wiper ?
 
All seemed to be OK, (Showrooms, previews, cockpit view etc)... until I watched a replay (with one of the new skins):
car lost parts, windscreen turned black, headlights turned on and off...something to do with LODS I assume.
But then I tried with one of the old skins and got no such issues there...
unfortunetly i can't help with that as i never use the replay function.

all it will be is bits of code putting back in for the lod's

best thing to do is get the OG code of zink's upload and have a look to see what is missing from what i sent you, add it back in and see what happens i would guess it's 1 bit of code



STCC skin re-purposed for the VRC Mondeo

Drag and drop to install this wil go into the csp version of the car i have not included the file structure for the non csp version

This is 1 of the worst mapped car's i have ever come across.



Screenshot (695).png
 
Last edited:
Here's some quick-and-dirty RainFX for leomaldonadoh's just-released Autodromo Las Vizcachas, if anyone wants it. Just create an "extension" folder in the track folder, rename ext_config.txt to ext_config.ini, and drop it in.

I also had to darken some of the textures as they were way too bright for me, but if the default looks OK on your system, just comment out or delete the [SHADER_REPLACEMENT_...] lines.

1726800773094.png
 

Attachments

  • ext_config.txt
    402 bytes · Views: 4
Last edited:
Anyone know what this is?
If you mean the laser beam, I was having this issue on LCS with Pure - they were everywhere, particularly at the start of practices and races. Couldn't fix it with any CSP settings or a clean Pure install. Reverting to Pure Gamma and re-enabling C13 AEGIS 1.9 completely fixed the issue.

I assume it's an LCS bug. Another reason to hold out on LCS for a while.
 
All seemed to be OK, (Showrooms, previews, cockpit view etc)... until I watched a replay (with one of the new skins):
car lost parts, windscreen turned black, headlights turned on and off...something to do with LODS I assume.
But then I tried with one of the old skins and got no such issues there...
sorry to harp on but i may of misread what you wrote. I didn't delete any code from the ext_config.ini file in any of zink5i's skins they were left as is i only changed it for the other original skins sorry for the wrong info
 
sorry to harp on but i may of misread what you wrote. I didn't delete any code from the ext_config.ini file in any of zink5i's skins they were left as is i only changed it for the other original skins sorry for the wrong info
I get an alert while loading, then the Venturi loads fine but one of the lods is kinda weird, weird shadow under the car, etc...
haven't checked which one.
There's also some front wheel clipping in the lot.
 
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.
Back